Ascot Reports Final Drill Results From Big Missouri Including 22.54g/t Gold Over 5.50 Metres

2019-12-10 / @nasdaq

 

VANCOUVER, British Columbia, Dec. 10, 2019 (GLOBE NEWSWIRE) -- Ascot Resources Ltd (TSX: AOT; OTCQX: AOTVF) (“Ascot” or the “Company”) is pleased to announce the results from forty-two (42) drill holes completed at the Big Missouri deposit of Ascot’s Premier Gold Project (“Premier”) near Stewart in northwestern British Columbia. These results should be considered in conjunction with previous news releases on Big Missouri dated June 27, July 17, July 25, August 8 and August 27.

Highlights of this release include:

  • 22.54g/t Au over 5.50m in hole P19-1999
  • 24.90g/t Au over 2.06m in hole P19-2020
  • 149.00g/t Au over 1.00m in hole P19-2070

Derek White, President and CEO of Ascot commented, “In 2019, the Company drilled just over 24,000 metres in 147 holes at Big Missouri with a total of 321 reported gold intercepts. In the past, Big Missouri was drilled to demonstrate wide zones of lower grade gold for open pit mining. Over the past two years the Company has focussed drilling on higher grade underground targets, especially around the S1 pit and Unicorn areas. We will incorporate this new drill data into an updated resource estimate.

"Big Missouri is a large area with enormous potential. We are confident that the drilling will convert a substantial amount of our inferred resources to the indicated category for our mine planning and the upcoming feasibility study.”

The Big Missouri deposit is located approximately five kilometres to the north of the Premier mill along the Big Missouri haul road. Westmin Resources previously mined gold from the S1 pit at Big Missouri and in the first half of the 20th century the deposit had limited production from underground. Mineralization at Big Missouri covers a large area and gold zones are present at three different stratigraphic levels in sub-horizontal zones with a gentle westerly dip. The drill program at Big Missouri was designed to convert a portion of the inferred resources to the indicated category. This news release completes the reporting of infill drilling from Big Missouri.

Drill Results

This news release presents the results from 42 drill holes, comprising 6,297 metres of drilling, completed from nine separate pads into the Big Missouri deposit. This set of holes was completed to test an area to the south of the S1 pit and the Unicorn area to the north (see figure 1). It is interesting that holes P19-2142 and P19-2145 intercepted gold mineralization as these holes were drilled for geotechnical purposes at a proposed portal site in the southern high wall of the S1 pit. This is the second proposed portal site where gold mineralization was intercepted during geotechnical investigations. The proximity of gold mineralization to a proposed access point is a very positive development in the course of our work towards restarting gold production at the Premier mill.

The drill results are favourable with gold intercepts at expected depth and confirming previously established orientations of mineralized zones. Figure 2 shows a cross section of drill holes P19-2109 and P19-2110 that were designed to follow up a previous high-grade intercept in hole P14-608 (83.5g/t Au over 1.52 metres). The drill holes intercepted gold mineralization at similar depth and are now aiding to establish one of the modeled zones, in this case solid 79 (see Figure 2). As a result of the two new drill holes, some of the ore blocks in the vicinity of the three holes will potentially qualify to be classified in the indicated category in an area where blocks were classified as inferred previously.

The results from the final set of drill holes at Big Missouri are summarized in Table 1 and the pad locations are listed in Table 2.

Photos accompanying this announcement are available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/927162f4-07d5-4aa3-8a34-6956c9e1b0a0

https://www.globenewswire.com/NewsRoom/AttachmentNg/b629c5bc-6413-4c5e-bcae-54330d18ce0d


Table 1 Summary of drill results from Big Missouri

Hole #padazimuth/dipFrom (m)To
(m)
Width
(m)
Au
(g/t)
Ag
(g/t)
P19-1994BM-37298/-45107.00117.9810.982.044.2
also  127.09128.091.003.454.0
P19-1995BM-37276/-53123.74125.742.002.623.0
P19-1996BM-37270/-76122.00125.003.002.543.3
also  141.33141.940.612.192.0
and  149.65150.651.003.869.0
P19-1997BM-37270/-87144.03152.038.001.254.8
P19-1998BM-37240/-675.207.202.002.7321.0
also  98.80102.203.401.366.2
and  121.78123.782.004.473.0
and  141.35142.401.053.244.0
and  166.00168.002.002.023.0
P19-1999BM-37226/-754.886.882.002.7513.0
also  147.10152.605.5022.548.3
incl.  149.10151.102.0045.3011.0
P19-2000BM-37155/-7973.8674.861.002.5111.0
also  128.50130.101.602.429.0
and  157.00159.002.002.202.0
and  161.30162.301.002.946.0
and  164.81168.403.591.958.5
P19-2005BM-3745/-4894.4395.931.506.4128.0
P19-2014BM-1790/-7459.5062.503.003.3210.7
also  66.5067.501.003.8516.0
and  71.5073.502.004.0511.5
P19-2015BM-1790/-8265.2870.505.222.5110.1
also  91.0092.001.003.307.0
and  114.50118.003.503.2813.5
P19-2016BM-170/-5957.0059.002.008.017.0
also  88.0089.001.004.859.0
P19-2017BM-17310/-8562.0065.063.063.3311.91
P19-2018BM-30240/-5011.4712.471.001.915.0
P19-2019BM-3090/-7734.5035.501.002.478.0
also  50.0052.002.002.659.0
P19-2020BM-30270/-6422.0023.501.502.884.0
also  35.9438.002.0624.907.0
and  63.0065.002.003.6517.0
and  148.94151.002.062.083.0
P19-2021BM-30270/-82no significant intercept
P19-2022BM-3090/-868.059.051.009.4012.0
also  71.7073.702.002.998.0
and  94.3095.301.0021.209.0
and  118.50119.501.002.515.0
P19-2023BM-3090/-659.5010.501.002.763.0
also  22.7823.781.005.7222.5
and  106.70108.702.003.0410.0
and  114.10117.253.155.7813.0
P19-2067BM-3390/-669.1013.104.003.5721.5
also  19.8321.832.005.5323.5
and  28.0430.042.002.567.0
and  34.2436.242.007.214.0
and  73.3586.1512.803.4413.5
incl.  78.5780.572.006.6627.0
and  111.06117.796.732.7310.6
and  137.00138.001.009.707.0
P19-2068BM-3390/-8618.3623.505.145.6810.6
also  38.2539.571.329.398.0
and  130.73132.001.273.2077.5
P19-2069BM-3330/-4717.0226.779.752.1515.4
P19-2070BM-33270/-82149.50150.501.0017.7017.0
also  154.50155.501.00149.0067.0
P19-2071BM-33270/-7222.5024.502.009.4010.0
P19-2075BM-3390/-6018.5522.413.868.0226.3
incl.  20.4121.140.7312.2039.0
also  58.4260.422.002.996.0
and  114.67121.957.284.7315.7
incl.  121.24121.950.719.5022.0
and  125.42126.421.002.8018.0
and  154.45155.451.006.808.0
and  170.00172.002.005.765.0
P19-2100BM-44280/-6422.0024.002.007.3412.0
also  100.00101.001.001.873.0
P19-2101BM-44280/-55135.94137.501.561.998.0
also  140.50142.001.501.966.0
P19-2102BM-4411/-8273.7076.002.302.168.0
P19-2103BM-44280/-8431.0032.481.487.6716.0
also  98.0099.001.004.085.0
and  144.90147.002.102.023.0
P19-2104BM-4462/-7283.0085.002.002.578.0
also  111.00113.002.002.0716.0
P19-2105BM-44135/-7617.8518.911.062.2213.0
also  99.08100.501.421.7032.0
P19-2106BM-0290/-4963.0966.243.155.5121.3
incl.  64.0965.091.009.6722.0
also  117.16120.253.095.6130.6
incl.  118.70120.251.558.2747.0
P19-2107BM-0290/-6436.2937.651.368.5610.0
P19-2108BM-0290/-758.8410.842.003.0512.0
P19-2109BM-01280/-60214.31215.671.365.4812.0
P19-2110BM-01280/-72173.36174.611.251.122.5
P19-2119BM-48285/-48109.62111.551.931.015.0
P19-2120BM-48268/-5059.0060.451.451.573.0
P19-2121BM-48249/-6718.3522.664.314.3115.4
incl.  18.3520.001.656.1216.0
also  116.50117.501.004.0426.0
P19-2122BM-48228/-7512.1713.591.421.8518.0
P19-2141GT-BM-02290/-52no significant intercept
P19-2142GT-BM-02290/-8522.0024.002.002.083.0
P19-2145GT-BM-02290/-3892.4193.561.1512.0010.0

True width is estimated to be approximately 70-90% of reported intercepts. The drill holes that are missing in the sequence have already been reported or are geotechnical holes.

Table 2 Drill pad locations

Pad #UTM NUTM EElevationHole no.
BM-01621900043633010492109, 2110
BM-02621912843635710582106-2108
BM-1762195854367659652014-2017
BM-3062196504366759922018-2023
BM-33621967543666710002067-2071, 2075
BM-37621977543677210181994-2000, 2005
BM-44621986743676010282100-2105
BM-48621991143672210222119-2122
GT-BM-02621920943649610022141, 2142, 2145

Quality Assurance/Quality Control

Lawrence Tsang, P. Geo., the Company’s Senior Geologist provides the field management for the Premier exploration program. John Kiernan, P. Eng., Chief Operating Officer of the Company is the Company’s Qualified Person (QP) as defined by National Instrument 43-101 and has reviewed and approved the technical contents of this news release.

Analytical work is being carried out by SGS Canada Inc (“SGS”). Ascot’s quality-assurance and quality-control program includes the use of analytical blanks to monitor for cross contamination, certified reference material standards to assess analytical accuracy, and duplicate samples to quantify sampling precision. This is in addition to the internal quality assurance program employed by SGS.

Samples are dried and weighed by SGS. They are then crushed to 75% passing 2mm, with 250g split and pulverized to 85% passing 75µm. Samples are processed on site by a mobile lab supplied by SGS and run by SGS personnel. All splits are sent to SGS in Burnaby. There, all samples are digested using aqua-regia with an ICP-AES finish and fire assay with AA finish for gold. Samples over 100ppm silver are digested with aqua regia and then volumetrically diluted before an ICP-AES or AA finish (up to 1,500ppm). Samples over 1,500ppm silver are fire assayed with a gravimetric finish. Samples over 10ppm gold are fire assayed with a gravimetric finish. Identified or suspected metallic gold or silver are subjected to “metallics” assays. Sampling and storage are at the Company’s secure facility in Stewart.

For more information about the Company, please refer to the Company’s profile on SEDAR at www.sedar.com or visit the Company’s web site at www.ascotgold.com, or for a virtual tour visit www.vrify.com under Ascot Resources. 

ON BEHALF OF THE BOARD OF DIRECTORS OF
ASCOT RESOURCES LTD.

“Derek C. White”, President and CEO

For further information contact:
Kristina Howe
VP, Investor Relations
778-725-1060 / khowe@ascotgold.com

About Ascot Resources Ltd. 
Ascot is a Canadian-based junior exploration company focused on re-starting the past producing historic Premier gold mine, located in British Columbia's Golden Triangle. The Company continues to define high-grade resources for underground mining with the near-term goal of converting the underground resources into reserves, while continuing to explore nearby targets on its Premier/Dilworth and Silver Coin properties (collectively referred to as the Premier project). Ascot's acquisition of IDM Mining added the high-grade gold and silver Red Mountain project to its portfolio and positions the Company as a leading consolidator of high- quality assets in the Golden Triangle.

The TSX Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release. 

Cautionary Statement Regarding Forward-Looking Information
All statements, trend analysis and other information contained in this press release about anticipated future events or results constitute forward-looking statements. Forward-looking statements are often, but not always, identified by the use of words such as “seek”, “anticipate”, “believe”, “plan”, “estimate”, “expect” and “intend” and statements that an event or result “may”, “will”, “should”, “could” or “might” occur or be achieved and other similar expressions. All statements, other than statements of historical fact, included herein are forward-looking statements. Although Ascot believes that the expectations reflected in such forward-looking statements and/or information are reasonable, undue reliance should not be placed on forward-looking statements since the Ascot can give no assurance that such expectations will prove to be correct. These statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-looking statements, including the risks, uncertainties and other factors identified in the Ascot’s periodic filings with Canadian securities regulators, and assumptions made with regard to: the estimated costs associated with construction of the Premier and Red Mountain Projects; the timing of the anticipated start of production at the Premier and Red Mountain Projects; the ability to maintain throughput and production levels at the Premier Mill. Forward-looking statements are subject to business and economic risks and uncertainties and other factors that could cause actual results of operations to differ materially from those contained in the forward-looking statements. Important factors that could cause actual results to differ materially from Ascot’s expectations include risks associated with the business of Ascot; risks related to exploration and potential development of Ascot’s projects; business and economic conditions in the mining industry generally; fluctuations in commodity prices and currency exchange rates; uncertainties relating to interpretation of drill results and the geology, continuity and grade of mineral deposits; the need for cooperation of government agencies and native groups in the exploration and development of properties and the issuance of required permits; the need to obtain additional financing to develop properties and uncertainty as to the availability and terms of future financing; the possibility of delay in exploration or development programs and uncertainty of meeting anticipated program milestones; uncertainty as to timely availability of permits and other governmental approvals; and other risk factors as detailed from time to time and additional risks identified in Ascot’s filings with Canadian securities regulators on SEDAR in Canada (available at www.sedar.com). Forward-looking statements are based on estimates and opinions of management at the date the statements are made. Ascot does not undertake any obligation to update forward-looking statements.

Primary Logo

Figure 1

Image of the Big Missouri deposit showing the locations of drill collars and drill holes described in this release. Pad locations are listed in Table 2.
Figure 2

West looking cross section through the drill holes from pad BM-01 (see figure 1). Drill hole 608 was drilled in 2014 and generated an envelope of ore blocks in the inferred category. Drill holes 2109 and 2110 were drilled with the intention of upgrading the ore blocks in this area by adding NEW information. Following the results from the two new holes, solid 79 could be modeled with fairly high confidence in its shape and orientation.

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok