Aton Announces the Final Results from the Resource Infill RC Drilling Programme at Hamama West

2022-10-20 / @accesswire

 

VANCOUVER, BC / ACCESSWIRE / October 20, 2022 / Aton Resources Inc. (TSXV:AAN) ("Aton" or the "Company") is pleased to update investors on the final results from the RC drilling programme at its Hamama West gold-silver project, located in the Company's 100% owned Abu Marawat Concession ("Abu Marawat" or the "Concession"), in the Eastern Desert of Egypt.

Highlights:

  • Assay results have now been received for the final 42 RC drill holes, HAP-163 to HAP-204;
  • Significant intersections include the following:
  • 1.43 g/t Au, 89.86 g/t Ag and 2.48 g/t AuEq over a 20m interval, from surface (drill hole HAP-163);
  • 0.82 g/t Au, 18.80 g/t Ag and 1.04 AuEq over an 80m interval, from surface (hole HAP-167);
  • 1.57 g/t Au, 29.99 g/t Ag and 1.92 AuEq over a 47m interval, from 26m depth (hole HAP-192);
  • 0.54 g/t Au, 55.12 g/t Ag and 1.19 g/t AuEq over a 49m interval, from 76m depth (hole HAP-195).

"We are surely pleased to be able to report the final results from the successful infill RC drilling programme at Hamama" said Tonno Vahk, Interim CEO. "Not only have we confirmed high grade quartz veins in new drilling at West Garida, but the Hamama West results have been good, and we certainly believe that the drilling has achieved its objective in terms of allowing us to upgrade the confidence of the inferred resource at Hamama. The ongoing diamond drilling programme at Rodruin is nearly complete, and as soon as it is finished the rig will then relocate to the Hamama area, where it will start testing currently undrilled oxide mineralisation at Hamama East. Now that we have the final assay results in, we will soon be able to start on updating the Hamama West mineral resource estimate, before we get on to the maiden Rodruin MRE. We continue to work closely with our partners, the Egyptian Mineral Resources Authority, as we follow the plan agreed with them, and move steadily forward, and towards our common goal of establishing new gold mines at Hamama and Rodruin."

Hamama West RC drilling programme

The Hamama West project has an indicated resource of 137,000 ounces of gold equivalent ("AuEq", gold and silver combined), and an inferred resource of 341,000 ounces AuEq. The uppermost oxide and transitional component of the Hamama West deposit (the "oxide gold cap") comprises an inferred resource of 106,000 ounces AuEq (see news release dated January 24, 2017). Metallurgical testwork has indicated average gold recoveries of 75.6% and 72.7% from oxide and transitional mineralisation types respectively (see news release dated February 22, 2018), using standard heap leach processing technology. Aton plans to initially mine the outcropping oxide gold cap of the deposit, which is mineralised directly from surface, as a low capex/opex starter open pit mining operation, with a heap leach processing facility. The Hamama West oxides will provide early cash flow, and will represent the first stage of phased mine development at the Abu Marawat Concession.

The reverse circulation percussion ("RC") resource infill drilling programme at the Hamama West gold-silver project (Figure 1) was completed on August 24, 2022. The programme was designed to primarily test the oxide gold cap of the Hamama West mineral resource estimate ("MRE"), with the specific objective of upgrading the confidence of the existing inferred resource. A total of 6,620m was drilled for the programme, predominantly at the Hamama West zone. 3 holes were completed, for 297m, at the Western Carbonate zone, approximately 400m west of Hamama West. 5 holes were drilled at the West Garida prospect approximately 3km east of Hamama West, for 390m, (see news release dated September 1, 2022), with the remaining 5,933m drilled at Hamama West.

Previous oxide gold cap drilling intersections from the programme include 2.90 g/t Au, 68.9 g/t Ag and 3.71 g/t AuEq over a 37m interval, from surface (drill hole HAP-115), 2.87 g/t Au, 54.3 g/t Ag and 3.51 AuEq over a 22m interval, from 1m depth (hole HAP-110), and 3.71 g/t Au, 258.4 g/t Ag and 6.75 g/t AuEq over a 12m interval, also from surface (drill hole HAP-137), see news releases dated August 26, 2022 and September 27, 2022.

Aton Resources, Inc., Thursday, October 20, 2022, Press release picture
Figure 1: Geology plan of the Abu Marawat Concession, showing the location of the Hamama West project

Drill holes were laid out using handheld GPS, with all collars surveyed on the completion of the programme by total station. Drill holes were down hole surveyed at appropriate intervals using a Champ GyroTM north-seeking gyroscopic survey tool. The locations of the Hamama West drill holes are shown in Figure 2, and collar details of holes HAP-163 to HAP-204 are provided in Appendix A.

Results

Selected significant intersections from the holes HAP-163 to HAP-204 are shown below in Table 1, and full results from all holes are provided in Appendix B.

Aton Resources, Inc., Thursday, October 20, 2022, Press release picture
Figure 2: Hamama West RC drilling programme - drill hole collar plan (red: 2022 RC holes reporting; blue: 2022 RC holes, previously reported; white: pre-2022 diamond drill holes)

Hole ID

Intersection (m) 1

Au (g/t)

Ag (g/t)

AuEq 2

(g/t)

Comments

From

To

Interval

HAP-163

0

20

20

1.43

89.86

2.48

Oxide resource

HAP-164

0

23

23

1.00

43.48

1.51

Oxide resource

HAP-166

0

31

31

0.66

30.16

1.01

Oxide resource

HAP-167

0

80

80

0.82

18.80

1.04

Oxide/sulphide resource

HAP-169

0

32

32

0.81

33.33

1.20

Oxide resource

HAP-170

0

24

24

0.88

46.13

1.43

Oxide resource

HAP-173

0

21

21

0.87

34.59

1.28

Oxide resource

HAP-176

0

33

33

0.72

26.09

1.03

Oxide resource

HAP-181

0

12

12

1.68

187.4

3.88

Crocs Nose Zone

HAP-191

19

40

21

1.73

21.15

1.98

Hole ended in mineralisation

HAP-192

26

73

47

1.57

29.99

1.92

Oxide/sulphide zone

HAP-194

57

80

23

1.33

52.56

1.95

Oxide/sulphide zone

HAP-195

76

125

49

0.54

55.12

1.19

Sulphide zone

HAP-199

18

103

85

0.65

16.01

0.84

Oxide/sulphide zone

Notes:

  1. Intersections calculated at a nominal cutoff grade of 0.5 g/t AuEq in runs of continuous mineralisation
  2. Gold equivalent, AuEq, is calculated at a ratio of 85:1 Au:Ag (ie. 1 g/t Au = 85 g/t Ag)

Table 1: Selected mineralised intersections from RC percussion holes HAP-163 to HAP-204

Holes HAP-163 to HAP-176 were all drilled to test the outcropping oxide gold cap of the deposit, which represents the oxide and transitional portion of the Hamama West inferred mineral resource. All these holes intersected zones of Au-Ag mineralisation from surface, as expected (see Appendix B), except hole HAP-172, which was collared on the structural footwall contact of the mineralised zone. Intersections included 1.43 g/t Au, 89.86 g/t Ag and 2.48 g/t AuEq over a 20m interval (drill hole HAP-163), and 0.82 g/t Au, 18.80 g/t Ag and 1.04 g/t AuEq over an 80m interval (drill hole HAP-163, in oxide and underlying sulphide zones), with both intersections from surface.

Holes HAP-177 to HAP-190 were all drilled to test an interpreted shallowly west-dipping fault zone which truncates the western margin of the main Hamama West deposit, and sinistrally displaces the oxide gold cap about 200m to the south. Several of the holes intersected narrow zones of near surface mineralisation, outside of the existing MRE, and can be expected to add minor incremental tonnes to the revised MRE. Mineralised intersections included 1.68 g/t Au, 187.4 g/t Ag and 3.88 g/t AuEq over a 12m interval from surface (drill hole HAP-181), and 3.50 g/t Au, 34.17 g/t Ag and 3.91 g/t AuEq over an 3m interval, from 2m depth (hole HAP-179).

Holes HAP-191 to HAP-194 were all drilled to test the interpreted extension of the main Hamama West mineralised zone beneath the west-dipping fault zone at the western margin of the deposit. All 4 of the holes intersected mineralisation, with hole HAP-193 finishing in the mineralised zone. Intersections included 1.57 g/t Au, 29.99 g/t Ag and 1.92 g/t AuEq over a 47m interval from 26m depth (drill hole HAP-192), and 1.33 g/t Au, 52.56 g/t Ag and 1.95 g/t AuEq over a 23m interval from 57m depth (hole HAP-194). These 4 holes confirm the depth continuity of the Hamama West deposit, further to the west of the surface outcrop of the mineralisation.

Holes HAP-195 to HAP-201 were drilled to test potential deeper sulphide mineralisation outside the existing sulphide MRE. Several holes failed to intersect significant mineralisation, but not all the holes reached the target due to the depth limit of the rig, which could reach a maximum of 238m. Significant mineralised intersections included 0.54 g/t Au, 55.12 g/t Ag and 1.19 g/t AuEq over a 49m interval from 76m depth (hole HAP-195) and 0.65 g/t Au, 16.01 g/t Ag and 0.84 g/t AuEq over an 85m interval from 18m depth (both oxide and sulphide zone mineralisation in hole HAP-199).

3 holes were drilled to test weak discontinuous, mineralisation sampled at surface at the Western Carbonate zone. None of the 3 holes, HAP-202 to HAP-204, intersected significant mineralisation.

Sampling and analytical procedures

The RC holes were drilled at 140mm diameter, and the bulk percussion chip samples were collected directly into pre-written large plastic bags from the cyclone every metre, numbered with the hole number and hole depths, and laid out sequentially at the drill site. Between each metre of drilling the cyclone and top box were cleaned out with compressed air. The bags were then moved to a logging and storage area where the chips were logged by Aton geologists. The bulk 1m samples were weighed, and subsequently riffle split through a 3-tier splitter onsite by Aton field staff to produce an approximately 1/8 split, which was collected in cloth bags, numbered and tagged with the hole number and depth. The splitter was cleaned with compressed air between each sample. The reject material from this initial bulk split was re-bagged, labelled and tagged, and the bulk reject samples will be stored and retained on site at Hamama. A representative sample of each metre was washed, stored in marked plastic chip trays, each containing 20m of samples, photographed, and retained onsite as a permanent record of the drill hole.

All the 1m split samples were weighed again, and the samples were riffle split onsite at the Hamama sample preparation facility, typically a further 3-4 times using a smaller lab splitter, to produce a nominal c. 250-500g sample split for dispatch to the assay laboratory. Again the splitter was cleaned with compressed air between each sample. The laboratory splits were allocated new sample numbers.

QAQC samples are inserted into the sample stream at a rate of approximately 1 certified reference material (or "standard" sample) every 30 samples, 1 blank sample every 15 samples, and 1 field duplicate split sample every 15 samples.

The c. 250-500g split samples were shipped to ALS Minerals sample preparation laboratory at Marsa Alam, Egypt, where they were pulverised to a size fraction of better than 85% passing 75 microns. From this pulverised material a further sub-sample was split off with a nominal c. 50g size, which was shipped on to ALS Minerals at Rosia Montana, Romania for analysis.

Samples were analysed for gold by fire assay with an atomic absorption spectroscopy ("AAS") finish (analytical code Au-AA23), and for silver using an aqua regia digest followed by an AAS finish (analytical code Ag-AA45). Any high grade gold samples (Au >10 g/t) were re-analysed using analytical code Au-GRA21 (also fire assay, with a gravimetric finish). High grade Ag samples (Ag >100 g/t) were re-analysed using the ore grade technique Ag-AA46 (also an aqua regia digest followed by an AAS finish).

About Aton Resources Inc.

Aton Resources Inc. (AAN: TSX-V) is focused on its 100% owned Abu Marawat Concession ("Abu Marawat"), located in Egypt's Arabian-Nubian Shield, approximately 200 km north of Centamin's world-class Sukari gold mine. Aton has identified numerous gold and base metal exploration targets at Abu Marawat, including the Hamama deposit in the west, the Abu Marawat deposit in the northeast, and the advanced Rodruin exploration prospect in the south of the Concession. Two historic British gold mines are also located on the Concession at Sir Bakis and Semna. Aton has identified several distinct geological trends within Abu Marawat, which display potential for the development of a variety of styles of precious and base metal mineralisation. Abu Marawat is 447.7 km2 in size and is located in an area of excellent infrastructure; a four-lane highway, a 220kV power line, and a water pipeline are in close proximity, as are the international airports at Hurghada and Luxor.

Qualified person

The technical information contained in this News Release was prepared by Javier Orduña BSc (hons), MSc, MCSM, DIC, MAIG, SEG(M), Exploration Manager of Aton Resources Inc. Mr. Orduña is a qualified person (QP) under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

For further information regarding Aton Resources Inc., please visit us at www.atonresources.com or contact:

TONNO VAHK
Interim CEO
Tel: +1 604 318 0390
Email: info@atonresources.com

Appendix A - RC drill hole collar details

Hole ID

Collar co-ordinates 1

Dip 2

Grid azimuth 2

EOH depth (m)

Comments

X

Y

Z

HAP-163

533966.6

2913771.1

513.8

-55

180

20

Targeting oxide resource

HAP-164

533966.3

2913781.1

513.9

-55

180

30

Targeting oxide resource

HAP-165

533968.1

2913794.4

514.6

-55

180

50

Targeting oxide resource

HAP-166

533968.3

2913811.0

514.4

-55

180

70

Targeting oxide resource

HAP-167

534000.3

2913802.3

518.0

-90

0

80

Targeting oxide resource

HAP-168

534016.4

2913790.2

518.6

-75

165

50

Targeting oxide resource

HAP-169

533999.7

2913791.5

518.6

-55

180

40

Targeting oxide resource

HAP-170

533999.8

2913782.9

518.8

-55

180

30

Targeting oxide resource

HAP-171

533999.7

2913772.3

518.4

-55

180

18

Targeting oxide resource

HAP-172

534020.7

2913762.4

514.6

-55

180

12

Targeting oxide resource

HAP-173

534020.9

2913771.6

514.5

-70

180

25

Targeting oxide resource

HAP-174

534037.1

2913774.3

513.6

-55

180

30

Targeting oxide resource

HAP-175

534036.9

2913756.1

517.1

-55

180

20

Targeting oxide resource

HAP-176

534062.1

2913769.3

520.1

-90

0

45

Targeting oxide resource

HAP-177

533914.3

2913699.5

510.8

-60

180

20

Western Boundary Fault zone

HAP-178

533912.5

2913680.9

511.8

-60

180

20

Western Boundary Fault zone

HAP-179

533892.9

2913679.9

511.9

-60

180

30

Western Boundary Fault zone

HAP-180

533912.6

2913662.5

514.4

-60

180

20

Western Boundary Fault zone

HAP-181

533894.2

2913659.5

514.6

-60

180

30

Western Boundary Fault zone

HAP-182

533869.5

2913657.5

514.9

-60

180

30

Western Boundary Fault zone

HAP-183

533869.4

2913672.2

514.9

-60

180

30

Western Boundary Fault zone

HAP-184

533870.5

2913710.0

514.5

-60

180

30

Western Boundary Fault zone

HAP-185

533894.6

2913702.8

512.5

-60

180

30

Western Boundary Fault zone

HAP-186

533915.1

2913720.5

510.1

-60

180

20

Western Boundary Fault zone

HAP-187

533916.4

2913745.1

509.2

-60

180

20

Western Boundary Fault zone

HAP-188

533909.9

2913759.5

508.9

-55

180

15

Western Boundary Fault zone

HAP-189

533893.5

2913743.0

512.3

-60

180

20

Western Boundary Fault zone

HAP-190

533895.5

2913760.6

510.0

-60

180

20

Western Boundary Fault zone

HAP-191

533870.3

2913798.7

505.6

-55

180

40

HAP-192

533870.9

2913816.1

504.7

-55

180

80

HAP-193

533841.8

2913812.4

505.1

-55

180

70

HAP-194

533841.0

2913832.6

500.2

-55

180

110

HAP-195

534277.0

2913897.2

519.6

-63

180

157

Targeting potential sulphides

HAP-196

534276.9

2913900.6

519.9

-77

180

166

Targeting potential sulphides

HAP-197

534242.9

2913917.9

526.9

-79

175

195

Targeting potential sulphides

HAP-198

534196.0

2913925.8

527.7

-80

175

238

Targeting potential sulphides

HAP-199

534050.2

2913868.2

507.0

-55

175

118

Targeting potential sulphides

HAP-200

534277.6

2913900.2

519.9

-85

175

184

Targeting potential sulphides

HAP-201

534085.6

2913919.9

511.4

-71

144

230

Targeting potential sulphides

HAP-202

533401.1

2913752.2

502.6

-50

180

106

Western Carbonate zone

HAP-203

533520.8

2913770.3

501.3

-50

180

106

Western Carbonate zone

HAP-204

533640.8

2913754.5

500.6

-50

180

85

Western Carbonate zone

Notes:

  1. Collar co-ordinates surveyed by Leica TCRA1203+ R1000 Robotic total station
  2. Collar surveys of drill holes undertaken at c. 3-6m depth, using a Champ Gyro north-seeking gyroscopic survey tool
  3. All co-ordinates are UTM (WGS84) Zone 36R

Appendix B - Significant intersections

Hole ID

Intersection (m) 1

Au (g/t)

Ag (g/t)

AuEq 2

(g/t)

Comments

From

To

Interval

HAP-163

0

20

20

1.43

89.86

2.48

HAP-164

0

23

23

1.00

43.48

1.51

HAP-165

0

19

19

0.63

28.26

0.97

HAP-166

0

31

31

0.66

30.16

1.01

and

39

43

4

0.53

8.80

0.64

HAP-167

0

80

80

0.82

18.80

1.04

incl.

0

47

47

0.95

22.03

1.21

incl.

54

80

26

0.79

17.50

1.00

HAP-168

0

33

33

0.74

19.74

0.97

incl.

8

33

25

0.89

21.39

1.14

HAP-169

0

32

32

0.81

33.33

1.20

HAP-170

0

24

24

0.88

46.13

1.43

incl.

0

18

18

1.00

55.99

1.66

HAP-171

0

18

18

0.77

49.57

1.35

incl.

0

10

10

1.08

69.80

1.90

HAP-172

-

-

-

-

-

-

NSA > 0.58 g/t Au (0-1m)

HAP-173

0

21

21

0.87

34.59

1.28

HAP-174

0

14

14

0.60

23.96

0.88

HAP-175

0

9

9

0.67

15.66

0.86

HAP-176

0

33

33

0.72

26.09

1.03

incl.

0

20

20

0.81

36.47

1.24

HAP-177

-

-

-

-

-

-

NSA (drilled in hangingwall)

HAP-178

-

-

-

-

-

-

NSA (drilled in hangingwall)

HAP-179

2

5

3

3.50

34.17

3.91

Western Boundary Fault?

HAP-180

-

-

-

-

-

-

NSA

HAP-181

0

12

12

1.68

187.4

3.88

Crocs Nose zone

HAP-182

4

8

4

0.68

6.03

0.75

Western Boundary Fault?

and

27

29

2

0.74

61.15

1.46

HAP-183

-

-

-

-

-

-

NSA > 1.33 g/t Au (19-20m)

HAP-184

-

-

-

-

-

-

NSA

HAP-185

0

5

5

0.97

6.92

1.05

Western Boundary Fault?

HAP-186

-

-

-

-

-

-

NSA (drilled in hangingwall)

HAP-187

-

-

-

-

-

-

NSA (drilled in hangingwall)

HAP-188

0

5

5

0.44

29.28

0.79

Western Boundary Fault?

HAP-189

3

7

4

0.40

15.98

0.59

Western Boundary Fault?

HAP-190

0

3

3

1.31

21.57

1.56

Western Boundary Fault?

HAP-191

19

40

21

1.73

21.15

1.98

Hole ended in mineralisation

HAP-192

26

73

47

1.57

29.99

1.92

incl.

39

73

34

2.00

37.20

2.44

HAP-193

40

45

5

0.57

15.98

0.76

and

56

70

14

0.86

8.81

0.96

Hole ended in mineralisation

HAP-194

57

80

23

1.33

52.56

1.95

incl.

57

65

8

3.06

134.26

4.64

HAP-195

76

125

49

0.54

55.12

1.19

incl.

93

125

32

0.71

34.43

1.12

Hole ID

Intersection (m) 1

Au (g/t)

Ag (g/t)

AuEq 2

(g/t)

Comments

From

To

Interval

HAP-196

-

-

-

-

-

-

NSA > 0.33 g/t Au on hangingwall contact

HAP-197

175

188

13

0.75

20.64

1.00

HAP-198

-

-

-

-

-

-

No mineralisation

HAP-199

18

103

85

0.65

16.01

0.84

incl.

18

43

25

0.52

14.91

0.70

and incl.

61

103

42

0.87

19.75

1.10

HAP-200

-

-

-

-

-

-

NSA > 0.09 g/t Au on hangingwall contact

HAP-201

-

-

-

-

-

-

NSA > 0.82 g/t Au, h/wall contact not reached?

HAP-202

-

-

-

-

-

-

Western Carbonate zone

HAP-203

78

80

2

1.56

27.90

1.89

Western Carbonate zone

HAP-204

-

-

-

-

-

-

Western Carbonate zone

Notes:

  1. Intersections calculated at a nominal cutoff grade of 0.5 g/t AuEq in runs of continuous mineralisation
  2. Gold equivalent, AuEq, is calculated at a ratio of 85:1 Au:Ag (ie. 1 g/t Au = 85 g/t Ag)

SOURCE: Aton Resources, Inc.



View source version on accesswire.com:
https://www.accesswire.com/721250/Aton-Announces-the-Final-Results-from-the-Resource-Infill-RC-Drilling-Programme-at-Hamama-West

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok