Denison Reports 25 Metres of 1.3% eU3O8 as Gryphon Exploration Continues at Wheeler River

2017-07-24 / @marketwired

 

TORONTO, ONTARIO--(Marketwired - July 24, 2017) - Denison Mines Corp. ("Denison" or the "Company") (TSX:DML)(NYSE MKT:DNN) is pleased to report that multiple high-grade intervals of uranium mineralization have been returned from the initial drill holes completed during the summer 2017 drilling program on the Company's 60% owned Wheeler River project. The summer 2017 drilling program is focused on the delineation and expansion of the Gryphon deposit and, to date, has been successful on multiple fronts including expansion of mineralization within the A, B and D series of lenses.

A total of 9,446 metres in 17 holes have been completed as part of the summer 2017 drilling program, which is expected to include approximately 18,000 metres in 40 holes. Results below are reported as preliminary radiometric equivalent grades ("eU3O8") derived from a calibrated downhole total gamma probe. The Company subsequently reports definitive assay grades following sampling and chemical analysis of the mineralized drill core.

Highlights

  • Nine infill and delineation drill holes have been completed on the Gryphon deposit's A, B and C series lenses, as part of the Company's infill drilling program to bring the current estimated inferred resources to an indicated level of confidence. Results are provided in Table 1 and include the following highlights:
    • 1.3% eU3O8 over 25.3 metres (including 3.3% eU3O8 over 7.8 metres) in drill hole WR-604D1
    • 4.1% eU3O8 over 5.9 metres in drill hole WR-692
    • 2.3% eU3O8 over 9.3 metres in drill hole WR-564D1
    • 3.0% eU3O8 over 7.0 metres (including 3.6% eU3O8 over 5.7 metres) in drill hole WR-610D1
    • 1.9% eU3O8 over 8.4 metres (including 2.5% eU3O8 over 6.2 metres) in drill hole WR-570D1

The results show good consistency with the current inferred block model, with drill holes WR-564D1 and WR-570D1 indicating potential for resource growth in their respective areas of the deposit. In total, 31 infill and delineation drill holes have been completed of the approximately 40 holes required.

  • Five initial drill holes have been completed within the Gryphon D series lenses, which are located outside of the current resources estimated for the Gryphon deposit. Each drill hole intersected meaningful mineralization, highlighting the potential for resource growth at the indicated or inferred level of confidence. Results are provided in Table 2 and include the following highlights:
    • 3.5% eU3O8 over 3.2 metres (including 4.1% eU3O8 over 2.7 metres) in drill hole WR-621D2
    • 2.7% eU3O8 over 2.3 metres (including 4.5% eU3O8 over 1.3 metres) in drill hole WR-691
    • 3.2% eU3O8 over 2.0 metres (including 6.1% eU3O8 over 1.0 metres) in drill hole WR-621D1
  • Three initial drill holes have been completed as part of the summer 2017 program with the objective of adding indicated resources from areas surrounding and within the Gryphon deposit's A and B series lenses. All three drill holes intersected mineralization, including drill hole WR-582D3 which was highlighted by a mineralized interval of 1.7% eU3O8 over 8.6 metres. Results are provided in Table 3.

The summer program at Wheeler River also includes the continuation and completion of certain Pre-Feasibility Study ("PFS") field activities, including environmental and engineering data collection programs. An updated mineral resource estimate for Wheeler River is planned once the summer 2017 assay results are received, and is then expected to be incorporated into the completion of a PFS planned for 2018.

Dale Verran, Denison's Vice President of Exploration, commented, "As we near the halfway mark of the summer 2017 drilling program at Wheeler River, we are very pleased with the downhole probe results received to date - particularly the eight holes drilled outside of the current Gryphon resource area, which have returned mineralization that we expect will increase the size of the resources at Gryphon. Drilling that has targeted the D series lenses continues to deliver new high-grade mineralization and we continue to see results from our infill drilling program that are expected to support an increase in both the size and confidence of the previously estimated resources for the Gryphon deposit."

Illustrative Figures & Further Details

To view Figures 1-5, please visit the following link: http://media3.marketwire.com/docs/Denis%20Mines%20image%20PDF.pdf

A plan map of the Gryphon A, B, C and D series lenses is provided in Figure 1. The inset on Figure 1 shows a schematic cross section of the A, B, C and D series lenses and their respective inclined longitudinal section windows (as shaded rectangles). Figures 2 to 5 provide inclined longitudinal sections of the Gryphon A, B, C and D series lenses respectively. The modelled mineralized lenses shown in Figures 1 to 5 are defined using a 0.05% U3O8 grade shell and minimum thickness of two metres and have been updated following receipt of the winter 2017 assay results. There is no certainty that the modelled mineralized lenses shown will constitute future mineral resources and they may be subject to modifications as further drilling data becomes available.

Further details regarding the Gryphon deposit and the current mineral resource estimates are provided in the NI 43-101 Technical Report for the Wheeler River project titled "Preliminary Economic Assessment for the Wheeler River Uranium Project, Saskatchewan, Canada" dated April 8, 2016 with an effective date of March 31, 2016. A copy of this report is available on Denison's website and under its profile on SEDAR at www.sedar.com and on EDGAR at www.sec.gov/edgar.shtml.

Detailed Radiometric Equivalent Probe Results

The following tables provide a complete set of the radiometric equivalent probe results to date from the drill holes completed during the summer 2017 exploration program at Wheeler River.

Table 1: Radiometric equivalent probe results for Gryphon deposit infill and delineation drill holes

Section Drill Hole From (m) To (m) Length (m)5 eU3O8(%)1,2,4 Lens Designation
4925GP WR-567D3 680.7 681.7 1.0 0.10 A Series
and 690.0 698.0 8.0 1.7 A Series
including3 690.2 691.2 1.0 7.0 A Series
including3 694.3 695.3 1.0 4.1 A Series
including3 696.8 697.8 1.0 1.6 A Series
and 705.7 707.9 2.2 0.14 B Series
WR-692 706.9 713.4 6.5 2.3 A Series
including3 710.7 711.8 1.1 11.3 A Series
and 737.3 738.3 1.0 0.37 B Series
and 740.5 743.1 2.6 0.57 B Series
and 746.2 752.1 5.9 4.1 B Series
including3 746.4 751.8 5.4 4.4 B Series
and 758.2 759.2 1.0 0.11 B Series
4975GP WR-693 No significant mineralization
WR-564D1 681.0 682.0 1.0 0.10 A Series
and 693.8 694.8 1.0 0.11 A Series
and 702.3 703.3 1.0 0.49 A Series
and 709.8 710.9 1.1 1.6 A Series
including3 709.9 710.9 1.0 1.7 A Series
and 714.6 715.6 1.0 0.26 A Series
including3 718.4 719.4 1.0 2.7 A Series
and 718.5 726.1 7.6 0.92 A Series
including3 722.4 723.4 1.0 2.3 A Series
and 730.6 732.1 1.5 0.21 B Series
and 742.2 751.5 9.3 2.3 B Series
including3 746.1 748.3 2.2 7.9 B Series
including3 750.4 751.4 1.0 2.2 B Series
and 754.4 755.4 1.0 0.30 B Series
5025GP WR-571D3 731.6 738.1 6.5 2.3 A Series
including3 733.1 737.5 4.4 3.3 A Series
and 759.3 760.9 1.6 3.4 B Series
including3 759.8 760.8 1.0 5.3 B Series
and 762.9 763.9 1.0 0.12 B Series
and 775.6 776.6 1.0 0.25 C Series
5075GP WR-610D1 513.2 514.4 1.2 0.24 A Series
and 751.0 752.0 1.0 0.11 B Series
and 799.3 806.3 7.0 3.0 B Series
including3 800.1 805.8 5.7 3.6 B Series
WR-604D1 749.1 750.1 1.0 0.20 A Series
and 764.6 766.1 1.5 1.2 A Series
including3 765.0 766.0 1.0 1.7 A Series
and 769.0 794.3 25.3 1.3 A Series
including3 774.3 775.5 1.2 1.3 A Series
including3 778.3 779.3 1.0 1.0 A Series
including3 779.6 787.4 7.8 3.3 A Series
and 798.0 800.5 2.5 1.3 B Series
including3 798.7 800.2 1.5 1.9 B Series
and 801.2 802.2 1.0 0.11 B Series
WR-570D1 744.7 752.4 7.7 0.92 A Series
including3 744.9 745.9 1.0 2.1 A Series
including3 748.1 750.9 2.8 1.5 A Series
and 753.6 754.6 1.0 0.13 B Series
and 758.6 759.6 1.0 0.10 B Series
and 766.2 774.6 8.4 1.9 B Series
including3 768.2 774.4 6.2 2.5 B Series
and 785.8 786.9 1.1 0.18 C Series
5100GP WR-606D3 782.7 787.0 4.3 0.32 A Series
and 789.9 805.1 15.2 0.63 B Series
including3 791.4 792.4 1.0 4.3 B Series
including3 798.1 799.1 1.0 1.6 B Series

Notes:

  1. eU3O8 is radiometric equivalent U3O8 from a calibrated total gamma downhole probe. eU3O8 results are preliminary in nature and all mineralized intervals will be sampled and submitted for chemical U3O8 assay.
  2. Intersection interval is composited above a cut-off grade of 0.1% eU3O8 unless otherwise indicated.
  3. Intersection interval is composited above a cut-off grade of 1.0% eU3O8.
  4. Composites are compiled using 1.0 metre minimum ore thickness and 2.0 metres maximum waste.
  5. As the drill holes are oriented steeply toward the northwest and the basement mineralization is interpreted to dip moderately to the southeast, the true thickness of the mineralization is expected to be approximately 75% of the intersection lengths. Drill hole WR-692 was drilled steeply to the north and therefore the true thickness of the mineralization is expected to be approximately 60% of the intersection lengths in this hole.

Table 2: Radiometric equivalent probe results for drill holes targeting the Gryphon D series lenses

Section Drill Hole From (m) To (m) Length (m)5 eU3O8(%)1,2,4 Lens Designation6
5175GP WR-691 639.7 640.7 1.0 0.59 A Series
and 699.3 700.3 1.0 0.21 B Series
and 712.8 713.8 1.0 0.14 D Series
and 785.9 786.9 1.0 0.47 D Series
and 788.9 790.1 1.2 0.16 D Series
and 791.8 794.2 2.4 0.95 D Series
including3 793.1 794.1 1.0 2.1 D Series
and 804.9 805.9 1.0 0.43 D Series
and 810.9 813.2 2.3 2.7 D Series
including3 811.5 812.8 1.3 4.5 D Series
and 817.1 818.1 1.0 0.12 D Series
5200GP WR-621D1 752.5 754.5 2.0 3.2 D Series
including3 752.8 753.8 1.0 6.1 D Series
and 761.5 764.0 2.5 0.62 D Series
including3 762.7 763.7 1.0 1.2 D Series
WR-621D2 706.3 707.3 1.0 0.11 D Series
and 752.8 756.0 3.2 3.5 D Series
including3 753.1 755.8 2.7 4.1 D Series
and 762.7 765.4 2.7 0.34 D Series
and 776.7 777.7 1.0 0.11 D Series
WR-638D3 709.4 710.8 1.4 0.37 A Series
and 715.7 716.7 1.0 0.24 A Series
and 758.2 759.3 1.1 0.26 C Series
and 770.9 771.9 1.0 0.11 C Series
and 775.4 779.5 4.1 0.44 D Series
including3 777.5 778.5 1.0 1.3 D Series
WR-621D3 736.4 737.4 1.0 0.26 C Series
and 762.1 763.1 1.0 0.24 D Series
and 765.6 766.6 1.0 0.27 D Series
and 769.8 770.8 1.0 0.10 D Series

Notes:

  1. eU3O8 is radiometric equivalent U3O8 from a calibrated total gamma downhole probe. eU3O8 results are preliminary in nature and all mineralized intervals will be sampled and submitted for chemical U3O8 assay.
  2. Intersection interval is composited above a cut-off grade of 0.1% eU3O8 unless otherwise indicated.
  3. Intersection interval is composited above a cut-off grade of 1.0% eU3O8.
  4. Composites are compiled using 1.0 metre minimum ore thickness and 2.0 metres maximum waste.
  5. As the drill holes are oriented steeply toward the northwest and the basement mineralization is interpreted to dip moderately to the southeast, the true thickness of the mineralization is expected to be approximately 75% of the intersection lengths. Drill hole WR-691 was drilled steeply to the north and therefore the true thickness of the mineralization is expected to be approximately 60% of the intersection lengths in this hole.
  6. Drill holes targeting the D series lens mineralization, in some cases, also intersect mineralization in the A and/or B and/or C stratigraphic horizons outside of the Gryphon resource area.

Table 3: Radiometric equivalent probe results for Gryphon deposit additional infill and expansion drill holes

Section Drill Hole From (m) To (m) Length (m)5 eU3O8(%)1,2,4 Lens Designation
5175GP WR-638D1 724.0 725.8 1.8 0.22 A Series
and 728.6 729.6 1.0 0.20 A Series
and 786.6 787.7 1.1 0.85 D Series
5200GP WR-582D3 738.8 747.4 8.6 1.7 A Series
including3 743.3 745.8 2.5 5.3 A Series
and 756.4 757.4 1.0 0.16 A Series
and 805.2 806.2 1.0 2.3 D Series
5225GP WR-582D4 746.3 748.6 2.3 0.24 A Series
and 763.2 764.2 1.0 0.10 A Series
and 798.1 799.1 1.0 0.28 D Series
and 814.4 816.2 1.8 0.81 D Series
including3 814.7 815.7 1.0 1.2 D Series

Notes:

  1. eU3O8 is radiometric equivalent U3O8 from a calibrated total gamma downhole probe. eU3O8 results are preliminary in nature and all mineralized intervals will be sampled and submitted for chemical U3O8 assay.
  2. Intersection interval is composited above a cut-off grade of 0.1% eU3O8 unless otherwise indicated.
  3. Intersection interval is composited above a cut-off grade of 1.0% eU3O8.
  4. Composites are compiled using 1.0 metre minimum ore thickness and 2.0 metres maximum waste.
  5. As the drill holes are oriented steeply toward the northwest and the basement mineralization is interpreted to dip moderately to the southeast, the true thickness of the mineralization is expected to be approximately 75% of the intersection lengths.

Qualified Persons and Data Quality

Dale Verran, MSc, P.Geo, Pr.Sci.Nat., Denison's Vice President, Exploration, who is a Qualified Person in accordance with the requirements of NI 43-101 has reviewed and approved the technical information contained in this release. The Company currently reports preliminary radiometric equivalent grades ("eU3O8"), derived from a calibrated downhole total gamma probe, during its exploration programs and subsequently reports definitive assay grades following sampling and chemical analysis of the mineralized drill core. Radiometric equivalent probe results are subject to verification procedures by qualified persons employed by Denison prior to disclosure. For further details on the total gamma downhole probe methods employed by Denison, QAQC procedures and data verification procedures please see Denison's Annual Information Form dated March 23, 2017 filed under the Company's profile on SEDAR (www.sedar.com).

About Wheeler River

Wheeler River is the largest undeveloped high-grade uranium project in the infrastructure rich eastern portion of the Athabasca Basin region, in northern Saskatchewan. The project is a joint venture between Denison (60% and operator), Cameco Corp. ("Cameco") (30%), and JCU (Canada) Exploration Company Limited ("JCU") (10%), and is host to the high-grade Gryphon and Phoenix uranium deposits discovered by Denison in 2014 and 2008, respectively. The Gryphon deposit is hosted in basement rock and is currently estimated to contain inferred resources of 43.0 million pounds U3O8 (above a cut-off grade of 0.2% U3O8) based on 834,000 tonnes of mineralization at an average grade of 2.3% U3O8. The Phoenix unconformity deposit is located approximately 3 kilometres to the southeast of Gryphon and is estimated to include indicated resources of 70.2 million pounds U3O8 (above a cut-off grade of 0.8% U3O8) based on 166,000 tonnes of mineralization at an average grade of 19.1% U3O8, and is the highest grade undeveloped known uranium deposit in the world.

On April 4th, 2016, Denison announced the results of a Preliminary Economic Assessment ("PEA") for the Wheeler River Project, which considers the potential economic merit of co-developing the high-grade Gryphon and Phoenix deposits as a single underground mining operation. The PEA returned a base case pre-tax Internal Rate of Return ("IRR") of 20.4% based on the current long term contract price of uranium (US$44.00 per pound U3O8), and Denison's share of estimated initial capital expenditures ("CAPEX") of CAD$336M (CAD$560M on 100% ownership basis). Exploration results from the subsequent drilling programs have not been incorporated into the resource estimate or the PEA. The PEA is preliminary in nature and includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them to be categorized as mineral reserves, and there is no certainty that the preliminary economic assessment will be realized. Mineral resources are not mineral reserves and do not have demonstrated economic viability. On July 19th, 2016 Denison announced the initiation of a Pre-Feasibility Study ("PFS") for the Wheeler River property and the complimentary commencement of an infill drilling program at the Gryphon deposit to bring the inferred resources to an indicated level of confidence.

As previously announced on January 10th, 2017, Denison has entered into an agreement with its Wheeler River Joint Venture partners, Cameco and JCU, to fund 75% of Joint Venture expenses in 2017 and 2018 (ordinarily 60%) in exchange for an increase in Denison's interest in the project to up to approximately 66%. Under the terms of the agreement, Cameco will fund 50% of its ordinary 30% share in 2017 and 2018, and JCU is expected to continue to fund its 10% interest in the project.

About Denison

Denison is a uranium exploration and development company with interests focused in the Athabasca Basin region of northern Saskatchewan. Including its 60% owned Wheeler River project, which hosts the high-grade Phoenix and Gryphon uranium deposits, Denison's exploration portfolio consists of numerous projects covering over 330,000 hectares in the infrastructure rich eastern Athabasca Basin. Denison's interests in Saskatchewan also include a 22.5% ownership interest in the McClean Lake joint venture, which includes several uranium deposits and the McClean Lake uranium mill, which is currently processing ore from the Cigar Lake mine under a toll milling agreement, plus a 25.17% interest in the Midwest deposit and a 63.01% interest in the J Zone deposit on the Waterbury Lake property. Both the Midwest and J Zone deposits are located within 20 kilometres of the McClean Lake mill.

Denison is also engaged in mine decommissioning and environmental services through its Denison Environmental Services division and is the manager of Uranium Participation Corp., a publicly traded company which invests in uranium oxide and uranium hexafluoride.

Cautionary Statement Regarding Forward-Looking Statements

Certain information contained in this press release constitutes "forward-looking information", within the meaning of the United States Private Securities Litigation Reform Act of 1995 and similar Canadian legislation concerning the business, operations and financial performance and condition of Denison.

Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "plans", "expects", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes", or the negatives and/or variations of such words and phrases, or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur", "be achieved" or "has the potential to". In particular, this press release contains forward-looking information pertaining to the following: exploration (including drilling) and evaluation activities, plans and objectives, including plans to update certain mineral resource estimates and to complete a PFS; potential mineralization of drill targets; the estimates of Denison's mineral resources and the results of its PEA. Statements relating to "mineral reserves" or "mineral resources" are deemed to be forward-looking information, as they involve the implied assessment, based on certain estimates and assumptions that the mineral reserves and mineral resources described can be profitably produced in the future.

Forward looking statements are based on the opinions and estimates of management as of the date such statements are made, and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Denison to be materially different from those expressed or implied by forward-looking statements. Denison believes that the expectations reflected in this forward-looking information are reasonable but no assurance can be given that these expectations will prove to be accurate and may differ materially from those anticipated in this forward looking information. For a discussion in respect of risks and other factors that could influence forward-looking events, please refer to the factors discussed in Denison's Annual Information Form dated March 23, 2017 under the heading "Risk Factors". These factors are not, and should not be construed as being exhaustive. Accordingly, readers should not place undue reliance on forward-looking statements.

The forward-looking information contained in this press release is expressly qualified by this cautionary statement. Any forward-looking information and the assumptions made with respect thereto speaks only as of the date of this press release. Denison does not undertake any obligation to publicly update or revise any forward-looking information after the date of this press release to conform such information to actual results or to changes in Denison's expectations except as otherwise required by applicable legislation.

Cautionary Note to United States Investors Concerning Estimates of Measured, Indicated and Inferred Mineral Resources: This press release may use the terms "measured", "indicated" and "inferred" mineral resources. United States investors are advised that while such terms are recognized and required by Canadian regulations, the United States Securities and Exchange Commission does not recognize them. "Inferred mineral resources" have a great amount of uncertainty as to their existence, and as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or other economic studies. United States investors are cautioned not to assume that all or any part of measured or indicated mineral resources will ever be converted into mineral reserves. United States investors are also cautioned not to assume that all or any part of an inferred mineral resource exists, or is economically or legally mineable.

David Cates
President and Chief Executive Officer
(416) 979-1991 ext. 362

Sophia Shane
Investor Relations
(604) 689-7842

Follow Denison on Twitter
@DenisonMinesCo

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok