Filo Mining Drills 1,025 Metres of 0.30% Copper and 0.22 g/t Gold at Filo del Sol - Demonstrating the Presence of a Significant Copper-Gold Porphyry Deposit Underlying the Current Resource

2019-03-18 / @newswire

 

Filo Mining Corp. (CNW Group/Filo Mining Corp.)

VANCOUVER, March 18, 2019 /CNW/ - Filo Mining Corp. (TSX-V, Nasdaq First North: FIL) ("Filo Mining", or the "Company") is pleased to announce the results of the first two diamond drill holes from the 2019 drill program at its 100% owned Filo del Sol project located on the border of Region III, Chile and San Juan Province, Argentina.  These holes, drilled 500 metres apart, demonstrate that the high-sulphidation epithermal deposit forming the bulk of the mineral resource which supports the project Pre-Feasibility Study ("PFS") is underlain by porphyry copper-gold mineralization to depths of over 1,000 metres below surface.

Please view PDF version of News Release.

Commenting on the results, CEO Adam Lundin stated, "These two holes confirm that the Filo del Sol resource represents only a small part of a much larger mineralized system, as we have always expected.  This really opens up the exploration potential at Filo and offers the potential to transform it into a much larger project than outlined in the recent PFS.  We currently have one additional hole completed, with assays pending, and four holes in progress which will help us to continue to develop our understanding of this very large porphyry system."

Results from the first two holes are presented below:

HOLE-ID

From (m)

To (m)

Length (m)

Cu %

Au g/t

Ag g/t

FSDH025

0.0

1025.0

1025.0

0.30

0.22

1.6

incl.

334.0

466.0

132.0

0.48

0.30

1.2

FSDH026

0.0

613.9

613.9

0.39

0.34

1.6

incl.

14.0

474.0

460.0

0.45

0.34

1.6

and incl.

14.0

94.0

80.0

0.73

0.43

1.8

and incl.

228.0

316.0

88.0

0.50

0.33

1.4

and incl.

420.0

474.0

54.0

0.49

0.37

3.3

Hole FSDH025 was collared on section 8000N at an angle of -76 degrees and drilled to a final depth of 1,025 metres.  The hole is entirely outside of the mineral resource and was drilled towards the west beneath the PFS plan open pit.  The hole intersected rhyolite country rock with intense porphyry veining (A and B type) and local hydrothermal brecciation down to a depth of 607 metres.  At 607 metres the hole passed into a large, mineralized polymictic hydrothermal breccia cut by narrow porphyry intrusions which continued to the end of the hole at 1,025 metres.   

Hole FSDH026 was collared 500 metres to the south of FSDH025, on section 7500N, and drilled to the west at an angle of -73 degrees.  This hole twins a previous reverse circulation (RC) hole (VRC036, drilled in 2006) to a depth of 400 metres and then continues to a final depth of 613.9 metres.  It was planned to a total depth of 1,000 metres but was unable to be completed by the drilling contractor and was terminated at 613.9 metres.  The top 200 metres of this hole is within the mineral resource with the remainder of the hole outside of it.  FSDH026 intersected similar geology to FSDH025, with rhyolite country rock and hydrothermal breccias cut by porphyry veining down to 466 metres where it passed into hydrothermal breccias and mineralized porphyry characterized by potassic alteration until its final depth.

Both holes ended in mineralization and the deposit remains open to depth and laterally.  Three holes totalling 2,184 metres have been completed to date, with an additional four holes in progress.  The drill program is scheduled to be completed by the end of March and additional assays will be released as they come available.

Qualified Persons and Technical Notes

The field program was carried out under the supervision of Bob Carmichael, B.A.Sc., P.Eng., and Diego Charchaflie, MSc., P.Geo (BC) who are the Qualified Persons as defined by NI 43-101.  Mr. Carmichael is Vice President, Exploration for the Company and has reviewed and approved the technical information contained in this news release.  Mr. Charchaflie is a principal geological consultant for the Company.

Samples are cut at Filo Mining's Batidero camp near the project site by Company personnel.  Diamond drill core is sampled in 2 metre intervals (except where shortened by geological contacts) using a rock saw for sulphide mineralization.  Oxide mineralization is cut with a core splitter, in order to prevent dissolution of water soluble copper minerals during the wet sawing process.  Core diameter is a mix of PQ, HQ and NQ depending on the depth of the drill hole.  Samples are bagged and tagged at camp, and packaged for shipment by truck to San Juan, Argentina. 

Samples are delivered to the ALS preparation laboratory in Mendoza, Argentina where they are crushed and a 500g split is pulverized to 85% passing 200 mesh.  The prepared samples are sent to the ALS assay laboratory in Lima, Peru.  ALS is an accredited laboratory which is independent of the Company.  Gold analyses were by fire assay fusion with AAS finish on a 30g sample.  Copper and silver were analysed by atomic absorption following a 4 acid digestion.  Samples were also analyzed for a suite of 36 elements with ICP-ES and a sequential copper leach analysis was completed on each sample.  Copper and gold standards as well as blanks and duplicates (field, preparation and analysis) were randomly inserted into the sampling sequence for Quality Control.  On average, 9% of the submitted samples are Quality Control samples.  No data quality problems were indicated by the QA/QC program.

Porphyry deposits are characterized by a large volume of relatively homogeneous mineralization and drilled lengths indicated in this news release are interpreted to be representative of the true width of the mineralized zone.

On behalf of the board

Adam Lundin,
President and CEO         

About Filo Mining

Filo Mining is a Canadian exploration and development company focussed on advancing development of its 100% owned Filo del Sol copper-gold-silver deposit located in Chile's Region III and adjacent San Juan Province, Argentina.  The Filo del Sol project is the subject of a recently completed Pre-Feasibility Study, and details of the project can be found in the 43-101 Technical Report detailing the results of that study titled "NI 43-101 Technical Report, Pre-feasibility Study for the Filo del Sol Project" dated February 22, 2019 with an effective date of January 13, 2019.

The Company's shares are listed on the TSX-V and on Nasdaq First North under the symbol "FIL".  Filo Mining is a member of the Lundin Group of Companies.

The Company's certified advisor on Nasdaq First North is Pareto Securities AB, +46 8 402 50 00, certifiedadviser.se@paretosec.com

Additional Information

This information is information that Filo Mining Corp. is obliged to make public pursuant to the EU Market Abuse Regulation.  The information was submitted for publication, through the agency of the contact person set out below, on March 18, 2019 at 3:30 p.m. Pacific Time.

Cautionary Note Regarding Forward-Looking Statements

Certain statements made and information contained herein in the news release constitutes "forward-looking information" and "forward-looking statements" within the meaning of applicable securities legislation (collectively, "forward-looking information"). The forward-looking information contained in this news release is based on information available to the Company as of the date of this news release. Except as required under applicable securities legislation, the Company does not intend, and does not assume any obligation, to update this forward-looking information. Generally, this forward-looking information can frequently, but not always, be identified by use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or statements that certain actions, events, conditions or results "will", "may", "could", "would", "might" or "will be taken", "occur" or "be achieved" or the negative connotations thereof. All statements other than statements of historical fact may be forward-looking statements.

Forward-looking statements contained in this news release include statements regarding the results of a drill program and expected completion of additional results related thereto.  In addition, this news releases include results of the PFS that would support development of the Filo del Sol Project.  Information concerning mineral resource/reserve estimates and the economic analysis thereof contained in the results of the PFS are also forward-looking information in that they reflect a prediction of the mineralization that would be encountered, and the results of mining, if a mineral deposit were developed and mined. Although Filo Mining believes that the expectations reflected in such forward-looking information are reasonable, undue reliance should not be placed on forward-looking information since Filo Mining can give no assurance that such expectations will prove to be correct. These statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-looking information, including the risks, uncertainties and other factors identified in Filo's periodic filings with Canadian securities regulators, including the Company's Annual Information Form available under the Company's profile at www.sedar.com.  In addition, these statements involve assumptions made with regard to the Company's ability to develop the Filo del Sol Project and to achieve the results outlined in the PFS; the ability to raise the capital required to fund construction and development of the Filo del Sol Project; and the results and impact of future exploration at Filo del Sol.

The forward-looking information contained in this news release are made as at the date of this news release and Filo does not undertake any obligations to publicly update and/or revise any of the included forward-looking information, whether as a result of additional information, future events and/or otherwise, except as may be required by applicable securities laws.  Forward-looking information is provided for the purpose of providing information about management's current expectations and plans and allowing investors and others to get a better understanding of the Company's operating environment. Forward-looking information is based on certain assumptions that the Company believes are reasonable, including that the current price of and demand for commodities will be sustained or will improve, the supply of commodities will remain stable, that the general business and economic conditions will not change in a material adverse manner, that financing will be available if and when needed on reasonable terms and that the Company will not experience any material labour dispute, accident, or failure of plant or equipment. These factors are not, and should not be construed as being, exhaustive. Although the Company has attempted to identify important factors that would cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated, or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. All of the forward-looking information contained in this document is qualified by these cautionary statements. Readers are cautioned not to place undue reliance on forward-looking information due to the inherent uncertainty thereof.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Filo Section 8000N (CNW Group/Filo Mining Corp.)

Filo Section 8000N (Full Resolution)

Filo Plan 2019 (CNW Group/Filo Mining Corp.)

Filo Plan 2019 (Full Resolution)

SOURCE Filo Mining Corp.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/March2019/18/c5346.html

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok