Kirkland Lake Gold Announces New High-Grade Intersections at Fosterville Swan Zone, Drilling Expands Robbin's Hill, Cygnet and Harrier Targets

2020-07-30 / @nasdaq

 

  • Infill drilling into the Swan Mineral Reserves intersects higher than expected grades with visible-gold; results highlight potential to add ounces to existing Mineral Reserves
    • Key intercepts:
      • 976 g/t Au over 7.4 m (ETW 7.0 m);
      • 933 g/t Au over 6.4 m (ETW 5.8 m);
      • 416 g/t Au over 6.8 m (ETW 5.6 m); and
      • 222 g/t Au over 8.1 m (ETW 7.3 m)

  • Drill results at Robbin’s Hill confirm substantial scale of mineralized system; new intercepts identify potential Mineral Resource extensions and new mineralization surrounding the Curie Fault 
    • Key intercepts:
      • 30.8 g/t Au over 3.6 m (ETW 2.9 m) Curie Fault;
      • 10.6 g/t Au over 1.6 m (ETW 1.6 m) Curie Fault;
      • 9.6 g/t Au over 4.6 m (ETW 3.7 m) Curie Fault;
      • 7.7 g/t Au over 3.7 m (ETW 2.8 m) Curie Fault;
      • 5.0 g/t Au over 17.8m (ETW 11.7m) Curie Fault;
      • 68.1 g/t Au(1) over 4.4 m (ETW 3.2 m) Herschel Fault
      • Visible-gold intercepts in holes RHD413 (Curie) and RHD411A (Curie HW)

  • Drilling of the Cygnet target demonstrates growth potential outside existing Mineral Resources 
    • Key intercepts:
      • 13.6 g/t Au over 6.6 m (ETW 5.9 m);
      • 12.7g/t Au over 2.1 m (ETW 2.1 m); and
      • 5.4 g/t Au over 9.7 m (ETW 8.0 m)

  • Drilling of the Harrier target intersects significant mineralization outside existing Mineral Reserves
    • Key intercepts:
      • 20.9 g/t Au over 5.9 m (ETW 5.5 m);
      • 22.8 g/t Au(1) over 4.3 m (ETW 3.7 m); and
      • 24.5 g/t Au over 3.8 m (ETW 3.8 m)

 Abbreviations include: (1): visible-gold; g/t Au: grams per tonne gold; ETW: estimated true width

TORONTO, July 30, 2020 (GLOBE NEWSWIRE) -- Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or the “Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today announced new high-grade results from surface and underground drilling at the Fosterville Mine in Victoria, Australia. Recent infill drilling in the Swan Zone has returned intercepts with higher than anticipated grades and visible-gold near the intersection of the Swan Fault and the Swan Splay structure. Surface drilling has continued to target additional growth in the Robbin’s Hill gold system to assess the potential of further Mineral Reserve expansion. Underground growth drilling programs have also progressed in the Lower Phoenix gold system targeting the Cygnet Fault, and in the Harrier gold system targeting the Harrier Base Fault, where encouraging results have been returned. Drill results reported are from 44 holes (6,803 m) from the Swan infill drilling program and 111 holes (59,311 m) from step out, extension and infill drilling at Robbin’s Hill, Cygnet and Harrier (Figures 1 & 2).

Tony Makuch, President and CEO of Kirkland Lake Gold, commented: “Drilling at Fosterville continues to demonstrate the significant size and scale of the mineralized structures, all of which contain quartz veining with visible-gold and all of which have the potential to host additional Swan or Swan-like zones. At the Swan Zone, results from new infill drilling include higher than expected grades, which is encouraging as we work towards our next Mineral Reserve and Mineral Resource update. In particular, the infill results confirm that the area where the Swan Fault and Swan Footwall Splay intersect contains more gold than currently modelled.

“At Robbin’s Hill, exploration activities are progressing well with recent surface drill results significantly expanding the size of the mineralized system and demonstrating the potential for continued Mineral Resource and Mineral Reserve growth along both the Curie and surrounding mineralized structures. Encouragingly, drilling and recent modelling of newly-acquired 3D seismic data clearly establish the potential for other mineralized structures within the Robbin’s Hill area, where there are several  historical open pits with plunge extents to be investigated. The new twin underground exploration ramp we are developing will be extremely important for the future exploration of these areas as well as Robbin’s Hill itself. The ramp is advancing well, having been driven over 1,330 m to the end of June.

“Drill results at Cygnet and Harrier also continue to return encouraging results. At the Cygnet structure, approximately 125 m footwall to Swan, new drilling returned multiple significant intercepts beyond the northern extent of the existing Mineral Resource. There are several high-grade intersections with visible-gold in the Cygnet system, which extends over a 750 m strike length and 300 m vertically. At Harrier, new drilling returned high-grade mineralization outside of the existing Mineral Reserves, and also demonstrated the continuity of the Harrier structure for an additional 400 metres down-plunge-plunge, with the system remaining open for further expansion. As with Lower Phoenix and Robbin’s Hill, the exploration potential at both Cygnet and Harrier is substantial and we are increasingly confident that significant new Mineral Reserves and Mineral Resources can be identified with further drilling.”

Exploration activities at Fosterville ceased in late March as part of the Company’s COVID-19 response, which included the suspension of all non-essential work. Prior to this time, work on the exploration program was advancing with four surface drills and nine underground drills at Fosterville on the mine lease and three surface drills on regional projects. With the suspension of exploration work, all surface drilling was discontinued and underground drilling was reduced to three drills, all being dedicated to supporting operations and sustaining capital drill requirements. Discussions and proactive planning with drilling contractors were undertaken in early April to manage COVID-19 risks with strict control measures being implemented to support a resumption of exploration drilling. By the middle of the month, two underground drills and two surface drills were deployed. The ramp up of operating drills has continued, with the current fleet standing at four surface drills at Robbin’s Hill and six underground drills active at the Fosterville mine. Regional exploration drilling remains suspended as part of the Company’s ongoing response to COVID-19.

Swan Infill Drilling Programs

Infill drilling into the Swan Mineral Reserves since the December 2019 Mineral Resource and Reserve update has returned results with higher than expected grades, demonstrating the potential to increase the mine’s Mineral Reserves in this zone with further model updates. Intercepts of significant high-grade, visible-gold mineralization of substantial width were returned in a zone where the Swan Footwall Splay intersects the Swan (Figure 3). Two infill holes into this zone returned gram-meter (gold grade x estimated true width) intercepts greater than 5000 gram-m, with a further three intercepts returning greater than 1000 gram-m, with the key intercepts listed below:

  • 976 g/t Au over 7.4 m (ETW 7.0 m) in hole UDH3167, incl. 5,710 g/t Au over 1.3m (ETW 1.2 m);
  • 933 g/t Au over 6.4 m (ETW 5.8 m) in hole UDH3405, incl. 6,202 g/t Au over 1.0 m (ETW 0.9 m);
  • 416 g/t Au over 6.8 m (ETW 5.6 m) in hole UDH3392, incl. 3,510 g/t Au over 0.8 m (ETW 0.7 m);
  • 222 g/t Au over 8.1 m (ETW 7.3 m) in hole UDH3169, incl. 1,684 g/t Au over 1.0 m (ETW 0.9 m); and
  • 156 g/t Au over 9.2 m (ETW 8.6 m) in hole UDH3360, incl. 307 g/t Au over 1.7m (ETW 1.6 m)

These results demonstrate the continuity of extremely high-grade, visible-gold mineralization along the structural intersection of the Swan Fault and Swan Footwall Splay, which plunges gently towards the south. Recent mine development into this zone also confirms the continuity of this mineralization, with this new information expected to result in the addition of new ounces in this area as part  of future Mineral Resource model updates. Mine production in the zone of current infill drilling and development is expected to extend through the 2020 – 2023 period. 

Further infill drilling targeting this intersection area is scheduled for the second half of 2020, which will establish increased drill density and has the potential to support Mineral Reserve growth. In addition, recent drill platform development has been completed and will support continued infill drilling of the down-plunge Swan Inferred Mineral Resources.  Drilling using the new platform infrastructure has commenced with three rigs currently in operation.

Robbin’s Hill Drilling Programs

The drill results reported were drilled from late Q4 2019 and through the first half of 2020 by up to six surface diamond drills operating in the Robbin’s Hill area. The primary target was gold mineralization along the west-dipping Curie Fault, one of the controlling structures for mineralization at Robbins’s Hill. Programs have included infill drilling within the existing Mineral Resource, and extension and step out drilling along the Robbin’s Hill Curie Fault mineralization trend. Four surface drills are currently operating at Robbins Hill focused on Mineral Resource extension including identifying the potential high-grade shoot down-plunge. Drilling programs in the second half of the year will expand to cover targets generated from the interpretation of 3D seismic data integrated with other geophysical data sets (Figure 4).

Extension Drilling

Twenty-seven surface drill holes for a total of 23,173 m were drilled targeting the down-plunge extensions of existing Mineral Resources and Mineral Reserves on the Curie Fault. The objective of this surface program is to obtain sufficient drill coverage to assess Mineral Resource potential down-plunge southwards to the ~11500mN before the end of 2020. The results of this drilling to date support the potential extension of Curie Fault mineralization approximately 950 m down-plunge from current Mineral Reserves (Figure 5). Additional drilling is required to establish continuity over this 950 m area.

Key sulfide-gold bearing intercepts include:

  • 30.8 g/t Au over 3.6 m (ETW 2.9 m) in hole RHD355;
  • 9.6 g/t Au over 4.6 m (ETW 3.7 m) in hole RHD365;
  • 7.7 g/t Au over 3.7 m (ETW 2.8 m) in hole RHD387B;
  • 10.6 g/t Au over 1.6 m (ETW 1.6 m) in hole RHD374; and
  • 4.9g/t Au over 17.8m (ETW 11.7m) in hole RHD400A

Results down-plunge of the current Mineral Reserves show southerly plunging zones of high-grade gold mineralization within the broader, lower grade mineralized Curie Fault system. The main zone of high‑grade mineralization that supported the Robbin’s Hill maiden Mineral Reserve is located where the west dipping Curie Fault structure transects and offsets a felsic dyke that has intruded along an anticlinal fold axis. Other zones of dilation and high-grade mineralization are emerging along the Curie Fault as it transects the folded sequence, as represented by a grouping of higher-grade results including RHD408 and RHD387B (Figure 5). These zones are typically represented by zones of extensional veining and disseminated sulfide gold mineralization, but often have stibnite-enriched quartz veins indicating a high potential for visible-gold mineralization.

Two recent diamond drill holes in RHD413 and RHD411A have intersected visible-gold mineralization at depth as part of this program, further reinforcing the growth potential in this area.

RHD413 intersects the Curie Fault approximately 950 m down-plunge from Mineral Reserves where the hole transects the eastern limb of an anticline. The structure hosts a 0.6 m wide brecciated to massive quartz vein containing 2-3mm slugs and specs of visible-gold which run parallel to a stylolite approximately 50 mm from the lower vein contact. The vein is surrounded by disseminated sulfide mineralization and tension veining, which is more prevalent in the sandstone dominated footwall, extending for approximately 2 m from the vein. This visible-gold occurrence is the deepest and southernmost observed occurrence on the Curie Fault to date (Figure 5).

Further to this, visible-gold mineralization has been intersected in other structures adjacent to the Curie Fault. RHD411A intercepted two westerly dipping quartz veins of 150-200 mm thickness approximately 60 m hangingwall of the Curie Fault (Figure 5). The two veins contain strong laminations and stylolitic textures, the lower of which contained a spec of visible-gold. Disseminated stockwork veining and sulfide mineralization, whilst relatively constrained on the hangingwall, extends at least 3 m into the footwall of the structure.

A significant part of the planned drill programs at Robbin’s Hill for the remainder of 2020 will aim to further define the continuity and extent of these high-grade mineralized shoots down-plunge, which are open for expansion at depth. 

In addition to results returned from the continued expansion drilling targeting the Curie Fault at Robbin’s Hill, a significant intercept containing visible-gold on the adjacent Herschel Fault was returned. Hole RHD408 contained an approximate 100 mm wide quartz interval containing a quartz vein bearing visible‑gold and stylolitic textures surrounded by a halo of disseminated sulfide mineralization with an estimated true width of 3.2 m. 

Key visible-gold bearing intercept:

  • 68.1 g/t Au over 4.4 m (ETW 3.2 m) in hole RHD408, incl. 747 g/t Au over 0.35 m (ETW 0.3m)

The Herschel Fault occurs approximately 200 m hangingwall to the Curie Fault at the northing of intersection (Figure 6) Surface drilling targeting Curie has incidentally intersected the Herschel Fault through recent drill programs. Initial interpretations suggest that mineralization is orientated on the north-south trending west-dipping fault and requires further drilling to determine its strike, dip and  down‑plunge lengths. There is potential connectivity with mineralization associated with the Robbin’s Hill pit towards the north, which also has occurrences of visible-gold mineralization, However, further drilling and interpretation work is required to confirm this. The intercept for RHD408 demonstrates the potential for high-grade visible‑gold mineralization along the structure, and vectoring in on its location and determining its extent will form part of future drill programs in the Robbin’s Hill area. 

Step out drilling

Six step-out drill holes, totaling 7,343m demonstrate that mineralization on the Curie Fault persists over a 2 km distance to the south of the existing Robbins Hill Mineral Reserves (Figure 5). Intercepts from this drilling demonstrate the scale and growth potential of the Robbin’s Hill mineralized system which has the potential to similar in size and scale to the Phoenix system (approximately 3.5 km in strike length) at Fosterville. Drill holes RHD395, RHD376 and RHD379 targeted the Curie Fault beyond 1.5 km to the south of Mineral Resources, and each hole intersected significant quartz-dominant stockwork disseminated sulfide mineralization. The intercepts for RHD395 and RHD376 were characterized by increased sulfide mineralization at a fault in an oblique-oblique structural setting on the eastern limb of a parasitic anticlinal fold.  Drill hole RHD379 intersected the Curie Fault, adjacent to an up-dip syncline axial plane, with east dipping mineralized structures also identified in the hanging-wall (Figure 5).

The most southern sulfide-gold bearing intercepts include:

  • 2.9 g/t Au over 2.6 m (ETW 2.0 m) in hole RHD395;
  • 2.5 g/t Au over 5.3 m (ETW 4.6 m) in hole RHD376; and
  • 1.8 g/t Au over 7.9 m (ETW 7.6 m) in hole RHD379

The demonstrated extent and scale of the system highlights the opportunity through further drilling to realize substantial Mineral Resource growth. 

High-Resolution 3D Seismic Survey

The Company completed a high-resolution 3D Seismic survey in the northern part of the Fosterville Mining License over the Robbin’s Hill mineralization trend. The survey was the first of its kind to be undertaken in Victoria for gold exploration and provides a high-resolution 3D dataset to a depth of over 1 km for detailed planning of future of underground development.

The survey area was approximately 6 km2 with data collected along 12.5 m spaced east‑west lines (Figure 4). Initial processing of the 3D seismic data was completed in April with fold resolution defined to 30 m and significant structural trends identified. Interpretation of this data is underway and combined with other geophysical datasets target generation work is progressing. The seismic data will contribute to the geological understanding and aid future exploration and development of the Robbin’s Hill area.

Robbin’s Hill Underground Decline Development

Underground development of the Robbin’s Hill ramp commenced in January this year and has progressed ahead of schedule, advancing a total of 1,336 m to the end of June. The recent arrival of a smart jumbo will provide increased development capacity and we will be targeting a total of 3,380 m of development at Robbin’s Hill in 2020.  The development will be used as an underground drill platform for exploration diamond drilling activities as the ramp progresses.

Cygnet Drilling Programs

Recent drilling exploring the northern extensions of the Cygnet Mineral Resources have returned encouraging results with three returning intercepts greater than 30 gram-meters (Figure 7). The Cygnet Fault key intercepts include:

  • 13.6 g/t Au over 6.6 m (ETW 5.9 m) in hole UDH3398;
  • 10.8 g/t Au over 2.9 m (ETW 2.9 m) in hole UDH3207A; and
  • 5.4 g/t Au over 9.7 m (ETW 8.0 m) in hole UDH3206

These results demonstrate the potential for further expansion of Cygnet Mineral Resources to the north and exploration drill programs during the second half of 2020 will initially target up to 250 m beyond existing Mineral Resources.

In addition, infill drill results into the Cygnet Mineral Resources continue to return encouraging results and both Cygnet and subsidiary structures Cygnet Hangingwall and Footwall Splays contain significant mineralization(Figure 7 & 8) including key intercepts:

Cygnet Infill

  • 12.7 g/t Au over 2.1 m (ETW 2.1 m) in hole UDH3196;
  • 11.0 g/t Au over 8.5 m (ETW 5.7 m) in hole UDH3492;
  • 8.1 g/t Au over 4.9 (ETW 4.2 m) in hole UDH3485;
  • 9.4 g/t Au over 3.1 m (ETW 2.0 m) in hole UDH3417A; and
  • 6.1 g/t Au over 6.0 m (ETW 5.6m) in hole UDE279

Cygnet Splays

  • 36.6 g/t Au over 2.2 m (ETW 1.9 m) in hole UDH3492, incl. 168 g/t Au over 0.4 m (ETW 0.3 m); and
  • 4.2 g/t Au over 4.3 m (ETW 4.1 m) in hole UDH3206

Infill drill programs into Cygnet will continue throughout the second half of 2020, with the objective to increase resource confidence to enable mineral reserve evaluation in this zone at the end of the year.

Harrier Drilling Programs

Recent drilling exploring the down dip and southern extensions of the Harrier Base Fault have returned encouraging results, demonstrating continued growth opportunity in the Harrier system.

High-grade sulfide mineralization has been intersected on the Harrier Base Fault between the 4150 and 4250mRLs (Figure 9), displaying grades and widths with significant potential to support further Mineral Reserve expansion in this zone.  The Harrier Base Fault key intercepts outside of December 2019 Mineral Reserves include:

  • 20.9 g/t Au over 5.9 m (ETW 5.5 m) in hole UDH3045 incl. 295 g/t Au over 0.3 m (ETW 0.3 m);
  • 22.8 g/t Au(1) over 4.3 m (ETW 3.7 m) in hole UDH3474A;
  • 24.5 g/t Au over 3.8 m (ETW 3.8 m) in hole UDH3497;
  • 12.0 g/t Au over 3.8 m (ETW 3.7 m) in hole UDH3498;
  • 8.3 g/t Au over 9.4 m (ETW 9.3 m) in hole UDH3510; and
  • 5.2 g/t Au over 6.9 m (ETW 6.8 m) in hole UDH3499

In addition, drilling targeting the Harrier Base Fault down-plunge demonstrates that continuity of mineralization extends a distance of approximately 400 m down-plunge of the lowest Mineral Reserves and is open for further exploration targeting. Mineralization grades and widths of significance occur along this plunge extent and include:

  • 8.1 g/t Au over 4.5 m (ETW 3.9 m) in hole UDE239;

Further to this, drilling extended below the Harrier Base fault has outlined the stratigraphic and structural framework to assist with further target generation in the Harrier zone (Figure 10). Structures footwall to the Harrier Base have displayed evidence of sulfide mineralization (Wagtail) and present future targets at depth.

The Harrier gold system has now been defined over a down-plunge extent of approximately 3.4 km and remains open for expansion. Future drilling in the Harrier zone will test target strike and dip extensions of known mineralized structures such as the Harrier Base Fault as well as adjacent trends of known and interpreted mineralization.

Qualified Persons

Troy Fuller, MAIG, Director of Exploration, Australia, is a "qualified person" as such term is defined in National Instrument 43-101 and has reviewed and approved the technical information and data included in this News Release.

For further information regarding the Company’s 2019 Mineral Reserves and Mineral Resources estimates for the Fosterville Gold Mine, please refer to the Company’s News Release dated February 29, 2020 and the Technical Report entitled “Updated NI 43-101 Technical Report Fosterville Gold Mine In the State of Victoria, Australia” effective December 31, 2018.

Drilling and Underground Sampling Assay QAQC

Kirkland Lake Gold has in place quality-control systems to ensure best practice in drilling, sampling and analysis of drill core. All diamond drill hole collars (Table 2) are accurately surveyed using a Leica TS16 Total Station instrument and down-hole deviations are measured by either electronic gyro or single-shot instruments.

Sampling consisted of diamond drill core that was either full core (i.e. for Swan drill samples) or half core sampled. Half core samples were cut longitudinally in half with a diamond saw; one-half of the drill core was sent to an independent laboratory for analysis and the other drill core half retained for reference. Sample pulps are returned from the assay laboratory for reference and future geological or metallurgical studies. Drill core sample intervals vary between 0.3 and 1.2m in length and were determined from logging of sulfide and visible-gold to geological boundaries.

Samples containing visible-gold or considered likely to contain visible-gold were separated from sulfide gold samples and dispatched independently for assaying. At the laboratory “visible-gold” jobs were processed through a single pulverizer and material barren of gold (‘quartz wash’) was crushed before and after each sample to minimize the potential for gold to contaminate successive samples.

Assays are either based on 25-gram fire assay. Mean grades are calculated using a variable lower grade cut-off (generally 2 g/t Au) and maximum 2 m internal dilution. No upper gold grade cut is applied to the data. However, during future Mineral Resource studies the requirement for assay top cutting will be assessed.

The samples were assayed at On Site Laboratory Services, an independent laboratory in Bendigo, Victoria. The facility is registered under ISO 9001:2015 (CERT-40147) and operates in accordance with ISO/IEC17025 (accreditation no. 20456) under National Association of Testing Authorities, Australia (NATA).

About Kirkland Lake Gold Ltd.

Kirkland Lake Gold Ltd. is a growing gold producer operating in Canada and Australia that produced 974,615 ounces in 2019. The production profile of the Company is anchored by three high-quality operations, including the Macassa Mine and Detour Lake Mine, both located in Northern Ontario, and the Fosterville Mine located in the state of Victoria, Australia. Kirkland Lake Gold's solid base of quality assets is complemented by district scale exploration potential, supported by a strong financial position with extensive management expertise.

For further information on Kirkland Lake Gold and to receive news releases by email, visit the website at www.kl.gold.

Cautionary Note Regarding Forward-Looking Information

This News Release includes certain "forward-looking statements". All statements other than statements of historical fact included in this release are forward-looking statements that involve various risks and uncertainties. These forward-looking statements include, but are not limited to, statements with respect to planned exploration programs, costs and expenditures, changes in Mineral Resource estimates, potential growth in Mineral Resources, conversion of Mineral Resources to proven and probable Mineral Reserves, and other information that is based on forecasts of future operational or financial results, estimates of amounts not yet determinable and assumptions of management. These forward-looking statements include, but are not limited to, statements with respect to future exploration potential, project economics, timing and scope of future exploration, anticipated costs and expenditures, changes in mineral resources and conversion of mineral resources to proven and probable reserves, and other information that is based on forecasts of future operational or financial results, estimates of amounts not yet determinable and assumptions of management.

Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "expects" or "does not expect", "is expected", "anticipates" or "does not anticipate", "plans", "estimates" or "intends", or stating that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be "forward-looking statements." Forward-looking statements are subject to a variety of risks and uncertainties that could cause actual events or results to differ from those reflected in the forward-looking statements. Exploration results that include geophysics, sampling, and drill results on wide spacings may not be indicative of the occurrence of a mineral deposit. Such results do not provide assurance that further work will establish sufficient grade, continuity, metallurgical characteristics and economic potential to be classed as a category of mineral resource. A mineral resource that is classified as "inferred" or "indicated" has a great amount of uncertainty as to its existence and economic and legal feasibility. It cannot be assumed that any or part of an "indicated mineral resource" or "inferred mineral resource" will ever be upgraded to a higher category of resource. Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into proven and probable reserves.

There can be no assurance that forward-looking statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company’s expectations include, among others, risks related to international operations, risks related to obtaining the permits required to carry out planned exploration or development work, the actual results of current exploration activities, conclusions of economic evaluations and changes in project parameters as plans continue to be refined as well as future prices of gold, as well as those factors discussed in the section entitled "Risk Factors" in the Company’s Annual Information Form, financial statements and related MD&A for the periods ended December 31, 2019 and March 31, 2020 and other disclosures of "Risk Factors" by the Company and its predecessors, which are filed with the securities regulatory authorities in certain provinces in Canada and available on SEDAR. Although the Company has attempted to identify key factors that could cause actual results to differ materially, there may be other factors that cause unanticipated and unintended results. There can be no assurance that such statements will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.

Cautionary Note to U.S. Investors - Mineral Reserve and Resource Estimates

All resource and reserve estimates included in this news release or documents referenced in this news release have been prepared in accordance with Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") - CIM Definition Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as amended (the "CIM Standards"). NI 43-101 is a rule developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. The terms "mineral reserve", "proven mineral reserve" and "probable mineral reserve" are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards. These definitions differ materially from the definitions in SEC Industry Guide 7 ("SEC Industry Guide 7") under the United States Securities Act of 1933, as amended, and the Exchange Act.

In addition, the terms "mineral resource", "measured mineral resource", "indicated mineral resource" and "inferred mineral resource" are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements filed with the U.S. Securities and Exchange Commission (the "SEC"). Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into reserves. "Inferred mineral resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to assume that all or any part of a mineral resource exists, will ever be converted into a mineral reserve or is or will ever be economically or legally mineable or recovered.

FOR FURTHER INFORMATION PLEASE CONTACT

Anthony Makuch, President, Chief Executive Officer & Director
Phone: +1 416-840-7884
E-mail: tmakuch@kl.gold

Mark Utting, Senior Vice President, Investor Relations
Phone: +1 416-840-7884
E-mail: mutting@kl.gold

Table 1:
Drill Assay Intercepts for the Swan Fault, Curie Fault, Curie Hangingwall Fault, Curie Footwall Fault, Herschel Fault, Cygnet Fault, Cygnet Hangingwall Splay, Cygnet Footwall Splay and Harrier Base Fault at Fosterville Gold Mine. 

(The results are later than those used for the December 31, 2019 Mineral Resources and Mineral Reserves update of The Fosterville Gold Mine)

Hole IDFrom
(m)
To
(m)
Downhole Interval
(m)
Estimated True Width (m)Gold Grade
(g/t Au)
Geological Structure
  Swan Fault Mineralization
UDE285654.6657.52.91.92.9Swan Fault
UDH3167(1)74.3581.77.357.0976Swan Fault
Including(1)74.75761.251.25,710Swan Fault
UDH3168(1)87.4591.94.454.099.2Swan Fault
Including(1)89.3589.650.30.31,270Swan Fault
UDH3169(1)82.690.78.17.3222Swan Fault
Including(1)83.184.11.00.91,684Swan Fault
UDH3185(1)135141.456.454.150.9Swan Fault
Including(1)140.25140.750.50.3546Swan Fault
UDH3267(1)108113.85.85.353.0Swan Fault
Including(1)111.35111.650.30.3890Swan Fault
UDH3269(1)101.2113.0511.8510.755.1Swan Fault
Including(1)111.3111.650.350.31,520Swan Fault
UDH3271102.9119.3516.4514.39.1Swan Fault
UDH3272(1)107117.310.39.3157Swan Fault
Including(1)107.7109.11.41.31,122Swan Fault
UDH3274(1)115.91193.12.731.4Swan Fault
Including(1)117.8118.150.350.3243Swan Fault
UDH3276(1)106.5110.23.73.6551Swan Fault
Including(1)107.85108.250.40.45,010Swan Fault
UDH3278(1)116.2123.77.56.867.6Swan Fault
Including(1)116.5117.40.90.8479Swan Fault
UDH3279(1)125.15129.554.43.735.5Swan Fault
Including(1)125.45125.750.30.3374Swan Fault
UDH3280(1)110.2121.811.610.928.9Swan Fault
Including(1)116.8117.30.50.5425Swan Fault
UDH3281(1)116.4126.8610.4610.017.3Swan Fault
Including(1)122.5122.90.40.4123Swan Fault
UDH3282(1)132.1141.159.055.89.5Swan Fault
UDH3283107.1120.7513.6512.516.7Swan Fault
Including112.31130.70.6122Swan Fault
UDH3284102.5116.914.414.17.4Swan Fault
UDH3320113.4118.054.653.812.8Swan Fault
UDH3322124.7127.953.252.828.3Swan Fault
UDH3324124.8130.75.94.87.3Swan Fault
UDH3326(1)122.8124.61.81.6228Swan Fault
Including(1)123.71240.30.31,310Swan Fault
UDH3328136.7137.10.40.33.9Swan Fault
UDH3332134.5136.72.22.021.5Swan Fault
UDH3334142.75144.71.951.317.3Swan Fault
UDH3360(1)115.05124.29.158.6156Swan Fault
Including(1)115.05116.71.651.6307Swan Fault
UDH3361(1)104.7116.5511.8510.368.9Swan Fault
Including(1)109.2110.51.31.1530Swan Fault
UDH3362(1)110.7125.0514.3510.254.6Swan Fault
Including(1)112.91141.10.8581Swan Fault
UDH3364(1)98.85115.116.2515.318.2Swan Fault
Including(1)106.8107.851.051.0200Swan Fault
UDH3365(1)99.4113.313.911.340.8Swan Fault
Including(1)108.11090.90.7515Swan Fault
UDH3367(1)103114.111.110.113.9Swan Fault
Including(1)104.9105.60.70.6114Swan Fault
UDH3384(1)76.183.056.956.570.0Swan Fault
Including(1)79.579.950.450.4870Swan Fault
UDH3385(1)79.387.257.957.513.8Swan Fault
UDH3386(1)71.774.42.72.763.7Swan Fault
Including(1)71.772.10.40.4351Swan Fault
UDH338784.490.56.15.37.6Swan Fault
UDH3389(1)65.572.156.655.894.2Swan Fault
Including(1)70.3571.851.51.3400Swan Fault
UDH3390(1)75.381.15.85.789.6Swan Fault
Including(1)78.7579.650.90.9518Swan Fault
UDH3391(1)74.785.4510.7510.89.6Swan Fault
UDH3392(1)81.888.66.85.6416Swan Fault
Including(1)86.487.20.80.73,510Swan Fault
UDH339387.4924.64.611.9Swan Fault
UDH3405(1)125.6131.956.355.8933Swan Fault
Including(1)127.65128.60.950.96,202Swan Fault
UDH3406(1)122.751285.253.755.3Swan Fault
Including(1)123.9124.40.50.4296Swan Fault
And(1)125.51260.50.4251Swan Fault
UDH34071151194.02.82.7Swan Fault
UDH3408(1)108.45114.35.855.874.2Swan Fault
Including(1)109109.30.30.31,080Swan Fault
  Curie Fault Mineralization
RHD327450.20453.503.33.27.3Curie Fault
RHD355760.95764.503.552.930.8Curie Fault
RHD3571,500.351,500.850.50.55.2Curie Fault
RHD358744.90748.853.953.01.4Curie Fault
RHD360671.50674.853.353.10.4Curie Fault
RHD361716.05718.352.31.70.8Curie Fault
RHD362368.40370.502.12.00.1Curie Fault
RHD364754.45759.855.44.74.5Curie Fault
RHD365780.90785.504.63.79.6Curie Fault
Including782.10782.600.50.419.9Curie Fault
RHD366A825.30826.701.41.21.4Curie Fault
RHD366D873.70874.400.70.64.7Curie Fault
RHD367755.85760.004.153.33.3Curie Fault
RHD369796.05797.151.11.00.5Curie Fault
RHD3741,252.301,253.901.61.610.6Curie Fault
RHD375771.60774.002.41.610.8Curie Fault
RHD3761,107.901,113.155.254.62.5Curie Fault
RHD378844.25849.355.13.62.4Curie Fault
RHD379795.90803.757.857.61.8Curie Fault
RHD386822.70827.104.42.84.3Curie Fault
RHD387B804.35808.003.652.87.7Curie Fault
RHD392862.55864.351.81.22.8Curie Fault
RHD394745.85747.101.250.90.7Curie Fault
RHD3951,181.151,183.752.62.02.9Curie Fault
RHD397773.50775.201.71.64.5Curie Fault
RHD398803.20807.454.253.40.9Curie Fault
RHD398A834.25835.200.950.81.1Curie Fault
RHD400823.40835.6012.27.62.2Curie Fault
RHD400A816.25820.203.952.52.0Curie Fault
And 828.25846.0017.7511.75.0Curie Fault
RHD402715.45717.201.751.58.2Curie Fault
RHD402B681.65684.502.852.65.3Curie Fault
RHD408756.10760.654.553.84.3Curie Fault
RHD413 (1)Visible-gold observed at 114m downhole. Results pending Curie Fault
  Curie Hangingwall Fault
RHD411A (1)Visible-gold observed at 829m downhole. Results pendingCurie HW Fault
  Herschel Fault Mineralization  
RHD408(1)309.20313.554.353.268.1Herschel Fault
Including(1)309.60309.950.350.3747Herschel Fault
  Cygnet Fault Mineralization
UDE279259.70265.655.955.66.1Cygnet
UDE283343.25343.550.30.211.4Cygnet
UDE284350.70352.601.91.42.6Cygnet
UDH3196404.10406.202.12.112.7Cygnet
UDH3204A375.95378.302.352.05.6Cygnet
UDH3205378.75383.304.553.75.4Cygnet
UDH3206296.80306.509.78.05.4Cygnet
UDH3207A271.10274.002.92.910.8Cygnet
UDH3208410.50410.800.30.21.9Cygnet
UDH3398288.30294.906.65.913.6Cygnet
UDH3399274.15274.450.30.30.1Cygnet
UDH3402268.40270.402.32.213.1Cygnet
UDH3404308.70310.201.51.25.7Cygnet
UDH3414364.40367.753.353.16.4Cygnet
UDH3415371.40372.100.70.70.1Cygnet
UDH3417A351.20354.303.12.09.4Cygnet
UDH3441378.90381.602.72.65.6Cygnet
UDH3479215.30215.700.40.40.7Cygnet
UDH3480222.20222.700.50.22.0Cygnet
UDH3482226.00227.251.251.14.2Cygnet
UDH3484260.20265.805.65.15.0Cygnet
UDH3485284.05288.904.854.28.1Cygnet
UDH3486243.00243.400.40.40.6Cygnet
UDH349248.0056.508.55.711.0Cygnet
  Cygnet Hangingwall Splay Mineralization
UDH3482208.25210.452.21.936.6Cygnet Hangingwall Splay
Including208.25208.600.350.3168.0Cygnet Hangingwall Splay
  Cygnet Footwall Splay Mineralization
UDE281336.50337.200.70.62.4Cygnet Footwall Splay
UDH3206343.55347.804.254.14.2Cygnet Footwall Splay
UDH3207A283.80285.201.41.46.9Cygnet Footwall Splay
UDH3162329.35330.901.551.33.6Cygnet Footwall Splay
UDH3400280.40280.900.50.50.0Cygnet Footwall Splay
UDH3401273.80274.100.30.312.1Cygnet Footwall Splay
UDH3485316.10319.403.32.13.3Cygnet Footwall Splay
  Harrier Base Fault Mineralization
UDE214244.60247.302.71.82.7Harrier Base
UDE222262.30264.101.81.70.5Harrier Base
UDE239382.85387.304.453.98.1Harrier Base
UDE268408.50409.801.30.86.0Harrier Base
UDE292385.00388.603.63.42.3Harrier Base
UDE295387.25390.002.752.52.6Harrier Base
UDE298395.25396.050.80.74.7Harrier Base
UDE300260.30264.203.93.16.7Harrier Base
UDE301287.60298.0010.46.02.0Harrier Base
UDE302A310.65311.751.10.60.0Harrier Base
UDE308521.00521.700.70.53.9Harrier Base
UDE310458.60459.200.60.67.6Harrier Base
UDE316476.70477.650.950.84.5Harrier Base
UDE320440.40443.653.251.44.0Harrier Base
UDE321465.00465.900.90.84.0Harrier Base
UDE325489.30491.001.71.63.8Harrier Base
UDE329555.95563.457.55.80.3Harrier Base
UDE339A409.70411.852.152.02.6Harrier Base
UDH3000214.90216.001.11.03.1Harrier Base
UDH3001202.60208.005.45.44.0Harrier Base
UDH3002207.45207.800.350.32.0Harrier Base
UDH3003217.90218.350.450.411.7Harrier Base
UDH3004210.80214.003.23.26.2Harrier Base
UDH3005219.00219.600.60.67.1Harrier Base
UDH3006226.75228.752.01.98.4Harrier Base
UDH3007215.30216.401.10.85.4Harrier Base
UDH3029230.45232.602.152.111.6Harrier Base
UDH3042233.25233.800.550.52.9Harrier Base
UDH3043245.90247.101.21.13.8Harrier Base
UDH3045230.50236.405.95.520.9Harrier Base
Including232.20232.500.30.3295Harrier Base
UDH3046248.45249.501.051.03.2Harrier Base
UDH3048234.25234.800.550.53.5Harrier Base
UDH3050244.00244.950.950.96.2Harrier Base
UDH3052238.85240.601.751.75.0Harrier Base
UDH3053243.55244.000.450.42.5Harrier Base
UDH3474245.70246.100.40.43.5Harrier Base
UDH3474A250.70255.004.33.722.8Harrier Base
UDH3488222.50223.400.90.90.6Harrier Base
UDH3489222.90228.355.454.14.4Harrier Base
UDH3490253.25254.200.950.74.5Harrier Base
UDH3491246.45246.800.350.33.9Harrier Base
UDH3494241.25249.107.857.63.8Harrier Base
UDH3495256.60260.804.24.25.6Harrier Base
UDH3496260.70266.355.655.74.1Harrier Base
UDH3497289.50293.303.83.824.5Harrier Base
UDH3498253.10256.853.753.712.0Harrier Base
UDH3499272.85279.706.856.85.2Harrier Base
UDH3500268.95269.610.660.66.4Harrier Base
UDH3510237.50246.909.49.38.3Harrier Base
UDH3512254.08254.230.150.1518.5Harrier Base

Notes:   
(1) – Visible-gold observed in drill intercept.
Swan drill intercepts greater than 1,000 Gram-Meter (gold grade x estimated true width) are shown in bold text; Non-Swan drill intercepts greater than 15 Gram-Meter are shown in bold text.

To view the figures associated with this release, please visit the following links: 

https://www.globenewswire.com/NewsRoom/AttachmentNg/912e2ccb-42ad-4944-91d3-9020824f5a75

https://www.globenewswire.com/NewsRoom/AttachmentNg/15e16e4b-1b88-41f2-8fa4-bd68d312f2e3

https://www.globenewswire.com/NewsRoom/AttachmentNg/4e853b79-e916-4756-8612-8eb84988aa72

https://www.globenewswire.com/NewsRoom/AttachmentNg/f46d96d0-0c62-4a38-8aeb-8f41a2fb6f99

https://www.globenewswire.com/NewsRoom/AttachmentNg/8ab33af3-6c0b-4db6-835f-7ae7a968b7b7

https://www.globenewswire.com/NewsRoom/AttachmentNg/1d1aa967-1b47-4419-b543-bb495e41bb3f

https://www.globenewswire.com/NewsRoom/AttachmentNg/6f6d08da-7697-467e-a4d4-198b31ee1abd

https://www.globenewswire.com/NewsRoom/AttachmentNg/c0126dbe-998f-4ea1-888e-f23ac820fc03

https://www.globenewswire.com/NewsRoom/AttachmentNg/9a2cbbf9-7169-4673-9625-7851d65cfa06

https://www.globenewswire.com/NewsRoom/AttachmentNg/89ef17c2-e3e0-47b9-bcc2-0e17c592c87b

Primary Logo

Figure 1

Fosterville Location Map
Figure 2

Longitudinal Project of Fosterville Gold Mine
Figure 3

Longitudinal Project of Swan Reserve Mineralization
Figure 4

Robbins Hill Location Plan
Figure 5

Robbin’s Hill: Longitudinal Projection of Cure Mineralization
Figure 6

Robbin’s Hill Schematic Cross Section
Figure 7

Longitudinal Projections of Cygnet and Cygnet Splay Fault Mineralization
Figure 8

Phoenix Gold System Schematic Cross Section
Figure 9

Long Projection of Harrier Mineralization
Figure 10

Harrier Schematic Cross Section

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok