Kirkland Lake Gold Intersects Exceptional Gold Grades at Macassa Near Contact of South Mine Complex and Amalgamated Break

2020-10-19 / @nasdaq

 

  • Drilling to test south margin of South Mine Complex (“SMC”) intersects high-grade mineralization outside of current Mineral Reserves near contact with Amalgamated Break                             
 ο Key intercept:253.7 gpt over 14.5 metres (“m”) core length (SMC)1
  101.1 gpt over 4.1 m core length (SMC), previously unreported 
  100.1 gpt over 2.0 m core length (SMC), previously unreported
  • Drilling on Lower SMC (“LSMC”) confirms and expands mineralization along west margin of current Mineral Resource
 ο  Key intercepts:103.3 gpt over 2.4 m core length (LSMC)
  58.9 gpt over 2.2 m core length (LSMC)
  49.5 gpt over 4.3 m core length (LSMC)
  41.2 gpt over 2.0 m core length (LSMC)
  • Drilling on Amalgamated Zone intersects high grades with infill and expansion drilling near current west limit of Mineral Resource
 ο Key intercepts:210.4 gpt over 8.2 m core length (Amalgamated)
  52.9 gpt over 2.0 m core length (Amalgamated)
  48.2 gpt over 2.0 m core length (Amalgamated)
  35.4 gpt over 2.0 m core length (Amalgamated) 


        1. True widths of drill results being reported are not known at this time.

TORONTO, Oct. 19, 2020 (GLOBE NEWSWIRE) -- Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or the “Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today reported new drill results from 135 holes (47,683 m) of underground exploration drilling from the Macassa Mine in Kirkland Lake, Ontario. Holes in the program were completed from platforms located on the 5300, 5600 and 5700 levels and designed mainly to confirm and extend resources within the SMC, LSMC and Amalgamated zones. Resources within the Amalgamated Zone consist of a series of mineralized lenses first identified by drilling in 2019 which are located on the south side of the SMC and adjacent to the Amalgamated Break.

Tony Makuch, President and CEO of Kirkland Lake Gold, commented: “Today’s results are encouraging as they support our view that there is substantial exploration potential in areas where the dip of the SMC approaches the contact with mineralized zones stacked vertically along the Amalgamated Break. These are separate areas of gold mineralization coming together, which is very interesting, and what we are seeing are some extremely high-grade intersections. The results today also continue to expand the mineralization at depth in the LSMC and identify new areas of high-grade mineralization along the Amalgamated Break, further increasing our confidence that there are new Mineral Reserves to be discovered as we drill along the Break through the Kirkland Lake camp. The new intersections being reported around the SMC and along the Amalgamated Break complement the results we issued in April that identified a large corridor of high-grade mineralization in close proximity to the #4 Shaft location, located at depth along the Main Break below the former mine workings on the Kirkland Minerals property. In combination, our drilling at Macassa this year has been successful in all three key areas of our exploration program: continuing to grow and expand the SMC, confirming the considerable exploration potential of the Amalgamated Break and demonstrating that there are significant ounces yet to be discovered, and mine life to be added, along the historic Main/’04 Break.”   

One of the holes (427 m) completed during the program (57-992) was collared in a platform on the north side of the 5700 Level and drilled in a southwesterly direction to test the margin of the SMC (see Figures 1 and 2). The hole was highly successful intersecting 253.7 gpt over 14.5 m, including 1,572.9 gpt over 0.6 m, 1,313.5 gpt over 0.3 m and 1,265.1 gpt over 0.6 m near the planned target location and slightly below the current Mineral Reserve for the SMC. The new intercept is also located between 9 and 39 m west of three previously unreported intercepts from the SMC including 101.1 gpt over 4.1 m from 57-704, 100.1 gpt over 2.0 m from 57-689 and 37.7 gpt over 3.6 m from 57-703, as well as four additional high-grade intercepts located immediately north of the Amalgamated Break. One of these four Amalgamated Zone intercepts is a new result and included 68.2 gpt over 2.3 m from 53-3053, while the other three intercepts had been previously reported (see press release dated May 2, 2019) and included 429.1 gpt over 3.3 m from 57-704, 164.8 gpt over 3.0 m from 57-689 and 26.7 gpt over 2.0 m from 57-703. Current interpretations for this part of the mine suggest that the new and previously unreported intercepts occur where the shallow southward dipping SMC begins to intersect steeply north dipping zones adjacent to the Amalgamated Break resulting in a broad zone of alteration containing multiple high-grade structures containing between 1 and 5% pyrite and local visible gold. Due to the complexity of mineralization in the vicinity of new intercept, the true width cannot be definitively established at this time, but is estimated to be between 5 and 10 m. The area to the west and to depth of the new intersection remains open for testing for at least another 25 to 30 m.  

A total of 54 of the new holes (22,204 m) of drilling from the new program were drilled northwards from platforms on the 5300 and 5700 levels and were designed to infill and expand inferred Mineral Resources near the west limit of the LSMC (Figure 3). Key intercepts from the drilling include 33.3 gpt over 2.0 m, including 177.6 gpt over 0.4 m, from 53-4114, 32.1 gpt over 2.0 m, 22.0 gpt over 3.2 m and 20.2 gpt over 2.0 m from 53-4116A, 31.8 gpt over 2.0 m from 53-4120, 24.6 gpt over 2.1 m from 53-4118, and 19.3 gpt over 3.2 m and 22.8 gpt over 2.0 m from 53-4162, which are from holes targeting inferred Mineral Resources and untested gaps in drill information on the upper west side of the LSMC. Additional key intercepts from this area include 103.3 gpt over 2.4 m, including 542.0 gpt over 0.3 m, from 57-903, 58.9 gpt over 2.2 m from 57-879, 49.5 gpt over 4.3 m, including 164.9 gpt over 1.2 m, from hole 57-975 and 41.2 gpt over 2.0 m and 38.0 gpt over 2.1 m from 57-976. These intersections are from holes designed to infill and expand inferred Mineral Resources on the lower west portion of the LSMC structure. Considering the results achieved and the fact that the area immediately to the west of the new holes remains largely untested, the potential to add new Mineral Resources with further drilling is considered excellent.   

An additional 80 holes (47,688 m) of drilling from the new program were drilled southwards from platforms on the 5300, 5600 and 5700 levels to confirm and expand current inferred Mineral Resources within the Amalgamated Zone near the current west limit on the 5300 Level (Figure 4). Significant results from the drilling include 11.0 gpt over 2.4 m from 53-4040, which was drilled near the top of the current Mineral Resource, as well as 210.4 gpt over 8.2 m, including 463.0 gpt over 3.7 m, from 53-4033, 52.9 gpt over 2.0 m, including 172.3 gpt over 0.6 m, from 53-4041 and 35.4 gpt over 2.0 m from 53-4045, which were drilled 50 to 60 m up dip.

Additional significant results include 48.2 gpt over 2.0 m, including 317.6 gpt over 0.3 m, from 57-900, 20.2 gpt over 2.1 m from 57-902, 13.5 gpt over 3.0 m from 57-895 and 13.2 gpt over 2.0 m from 57-975, which were drilled mainly to infill an untested gap in the east part of the current inferred Mineral Resource, as well as 8.3 gpt over 9.0 m from 56-777, 14.4 gpt over 2.4 m from 53-4027 and 12.9 gpt over 2.0 m from 53-4039, which were drilled near the west edge of the current Mineral Resource and extending mineralization by another 25 m.

Based on the latest results, and the large areas remaining to be tested along strike and dip, the potential to identify new areas of high-grade mineralization along the Amalgamated Break remains excellent.

Exploration drilling at Macassa is currently continuing with nine drills underground and one drill on surface. Drilling over the balance of the year will remain focused on testing the SMC and Amalgamated Zones.

Qualified Person

The Company’s exploration programs at Macassa are conducted under the supervision of Eric Kallio, P.Geo., Senior Vice President, Exploration. Eric Kallio is the ‘qualified person’ for the purpose of National Instrument 43-101, Standards of Disclosure for Mineral Projects, of the Canadian Securities Administrators, and has reviewed and approved the scientific and technical information in this news release.

QA/QC Controls

The Company has implemented a quality assurance and control (“QA/QC”) program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. The drill core is sawn in half with one half of the core samples shipped to Swastika Laboratories in Swastika, Ontario. The other half of the core is retained for future assay verification. Other QA/QC includes the insertion of certified reference standards, blanks and the regular re-assaying of pulps and rejects at alternate certified labs. Gold analysis is conducted by fire assay using atomic absorption or gravimetric finish. The laboratory re-assays at least 10% of all samples and additional checks may be run on anomalous values.

About Kirkland Lake Gold Ltd.

Kirkland Lake Gold Ltd. is a growing gold producer operating in Canada and Australia that produced 974,615 ounces in 2019. The production profile of the Company is anchored by three high-quality operations, including the Macassa Mine and Detour Lake Mine, both located in Northern Ontario, and the Fosterville Mine located in the state of Victoria, Australia. Kirkland Lake Gold's solid base of quality assets is complemented by district scale exploration potential, supported by a strong financial position with extensive management expertise.

For further information on Kirkland Lake Gold and to receive news releases by email, visit the website www.klgold.com.

Cautionary Note Regarding Forward-Looking Information

This Press Release contains statements which constitute ”forward-looking statements” within the meaning of applicable securities laws, including statements regarding the plans, intentions, beliefs and current expectations of the Company with respect to the future business activities and operating performance of the Company. The words “may”, “would”, “could”, “should”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions, as they relate to the Company, are intended to identify such forward-looking statements. Investors are cautioned that forward-looking statements are based on the opinions, assumptions and estimates of management considered reasonable at the date the statements are made such as, without limitation, opinion, assumptions and estimates of management regarding the Company’s business, including but not limited to; the continued exploration programs on the SMC and Amalgamated Break mineralization, the timing and results thereof; the ability to continue to expand the SMC and Amalgamated Break and to increase levels of resources and reserves as a result of such exploration programs and the anticipated timing thereof; the potential to increase the level of resources and reserves and potential conversion of mineral resources; the anticipated completion date of the #4 shaft and potential impact and benefits thereof; the amount of future production over any period; the anticipated overall impact of the Company’s COVID 19 response plans including measures taken by the Company to reduce the spread of COVID 19; and assumptions made relating to operating cash costs based on forecasts and projections. Such opinions, assumptions and estimates, are inherently subject to a variety of risks and uncertainties and other known and unknown factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. These factors include the Company's expectations in connection with the projects and exploration programs being met, the impact of general business and economic conditions, global liquidity and credit availability on the timing of cash flows and the values of assets and liabilities based on projected future conditions, the impact of COVID-19, fluctuating gold prices, currency exchange rates (such as the Canadian dollar versus the United States Dollar), possible variations in ore grade or recovery rates, changes in accounting policies, changes in the Company's corporate mineral reserves and resources, changes in project parameters as plans continue to be refined, changes in project development, construction, production and commissioning time frames, the possibility of project cost overruns or unanticipated costs and expenses, higher prices for fuel, power, labour and other consumables contributing to higher costs and general risks of the mining industry, failure of plant, equipment or processes to operate as anticipated, unexpected changes in mine life, seasonality and unanticipated weather changes, costs and timing of the development of new deposits, success of exploration activities, permitting time lines, government regulation of mining operations, environmental risks, unanticipated reclamation expenses, title disputes or claims, and limitations on insurance, as well as those risk factors discussed or referred to in the Company's annual Management's Discussion and Analysis and Annual Information Form for the year ended December 31, 2019 and its filings for the quarterly period ended June 30, 2020, filed with the securities regulatory authorities in certain provinces of Canada and available at www.sedar.com.

Should one or more of these risks or uncertainties materialize, or should assumptions underlying the forward-looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although the Company has attempted to identify important risks, uncertainties and factors which could cause actual results to differ materially, there may be others that cause results not to be as anticipated, estimated or intended. The Company does not intend, and does not assume any obligation, to update these forward-looking statements except as otherwise required by applicable law.

Cautionary Note to U.S. Investors - Mineral Reserve and Resource Estimates

All references to Mineral Resources and Mineral Reserves included in this news release have been prepared in accordance with Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") - CIM Definition Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as amended (the "CIM Standards"). NI 43-101 is a rule developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. The terms "mineral reserve", "proven mineral reserve" and "probable mineral reserve" are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards. These definitions differ materially from the definitions in SEC Industry Guide 7 ("SEC Industry Guide 7") under the United States Securities Act of 1933, as amended, and the Exchange Act.

In addition, the terms "Mineral Resource", "measured Mineral Resource", "indicated Mineral Resource" and "Inferred Mineral Resource" are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements filed with the U.S. Securities and Exchange Commission (the "SEC"). Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into reserves. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to assume that all or any part of a Mineral Resource exists, will ever be converted into a Mineral Reserve or is or will ever be economically or legally mineable or recovered.

FOR FURTHER INFORMATION PLEASE CONTACT

Anthony Makuch, President, Chief Executive Officer & Director
Phone: +1 416-840-7884
E-mail: tmakuch@kl.gold

Mark Utting, Senior Vice President, Investor Relations
Phone: +1 416-840-7884
E-mail: mutting@kl.gold

        

Table 1. New Drill Holes – SMC and LSMC 1
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
53-3053**Amalgamated569261533124331-64305253.5255.82.368.2
53-3961Amalgamated5687565331151217-78320NSV
53-3963AAmalgamated5687565331151245-75314NSV
53-4002Amalgamated5687585331153171-51259NSV
53-4003Amalgamated5687585331152177-42229NSV
53-4004Amalgamated5687575331150226-46198NSV
53-4005Amalgamated5687565331151223-74290NSV
53-4007Amalgamated5687555331151264-54259NSV
53-4026Amalgamated5687565331151237-66207NSV
53-4027Amalgamated5687575331151218-71220157.3159.72.414.4
53-4028Amalgamated5687575331151218-64189NSV
53-4029AAmalgamated5687575331151204-71220NSV
53-4030Amalgamated5687575331151209-69207159.1161.12.03.2
Including      160.6161.10.513.0
53-4030Amalgamated5687575331151209-69207165.2171.36.13.1
53-4031Amalgamated5687575331151206-66192NSV
53-4032Amalgamated5687575331151210-53174NSV
53-4033Amalgamated5687585331151195-44213123.1131.48.2210.4
Including      124.1127.73.7463.0
53-4037Amalgamated5687575331150227-43183NSV
53-4038Amalgamated5687575331151214-53198NSV
53-4039Amalgamated5687575331151199-70229150.8152.92.012.9
Including      150.8151.30.547.8
53-4040Amalgamated5687575331150181-65213163.4165.82.411.0
Including      163.4164.00.634.5
53-4041Amalgamated5687585331150179-5622976.878.82.052.9
Including      76.877.40.6172.3
53-4042Amalgamated5687575331150173-59259NSV
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
53-4044Amalgamated5687575331151169-53244167.9
53-4045Amalgamated5687585331150168-47229117.0119.02.035.4
Including      118.0118.60.6102.3
53-4046Amalgamated5687585331150167-50244152.5154.52.03.2
53-4066Amalgamated570026533172327-67338NSV
53-4092Amalgamated5687565331151264-63238NSV
53-4093Amalgamated5687575331151186-60198NSV
53-4094Amalgamated5687575331151180-49183NSV
53-4095Amalgamated5687575331151180-49183NSV
53-4096Amalgamated5687575331151165-48213NSV
53-4097Amalgamated5687575331151163-51213NSV
53-4098Amalgamated5687575331151165-55211NSV
53-4126Amalgamated56890053312332690216127.1129.12.03.2
53-4127Amalgamated5689005331233269-14274NSV
56-737Amalgamated5687295331340202-30328NSV
56-743Amalgamated5687295331340215-38335NSV
56-744Amalgamated5687295331340207-49366NSV
56-745Amalgamated5687295331340200-37335NSV
56-747Amalgamated5687305331340187-33366NSV
56-751AAmalgamated5687325331340178-28412NSV
56-752Amalgamated5687305331341180-40412NSV
56-753Amalgamated5687325331340187-26381NSV
56-754Amalgamated5687335331342183-14396NSV
56-755Amalgamated5687315331340204-29305NSV
56-756Amalgamated5687325331340195-27305NSV
56-757Amalgamated5687295331340190-38351NSV
56-759Amalgamated56873153313402034335NSV
56-760Amalgamated5687325331340199-3335NSV
56-761Amalgamated56873153313401963351NSV
56-762Amalgamated56872953313401928351NSV
56-763Amalgamated56873253313401893351NSV
56-765Amalgamated56872953313401868380NSV
56-766Amalgamated56873253313401832381NSV
56-767Amalgamated56873253313401808396NSV
56-769Amalgamated5687285331341204-60427NSV
56-772Amalgamated5687315331339206-23290243.8246.93.04.0
56-773Amalgamated5687315331339208-15290242.3246.03.76.5
56-774Amalgamated5687315331339210-19290243.1252.79.64.8
           
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
56-775Amalgamated5687285331341212-22290250.2256.66.46.5
Including      251.2252.41.217.1
56-776Amalgamated5687315331339213-31290NSV
56-777Amalgamated5687315331339214-18290244.1253.09.08.3
Including      244.7246.21.517.0
Including      252.4253.00.723.1
56-778Amalgamated5687315331339219-23335NSV
56-779Amalgamated5687315331339222-21290243.5245.52.05.0
56-779Amalgamated5687315331339222-21290251.2253.22.06.5
56-780AAmalgamated5687285331340222-32305NSV
56-781Amalgamated5687285331340223-24290249.5254.24.75.3
57-689*Amalgamated5692215331373267-4027794.597.53.0164.8
57-703*Amalgamated5692215331374273-46168101.3103.32.026.7
57-704*Amalgamated5692215331374260-4415279.282.63.3429.1
57-878Amalgamated568934533117325-6551820.422.92.48.9
Including      20.421.00.530.0
57-879Amalgamated568935533117411-5039616.218.32.13.9
57-880Amalgamated568934533117211-6048816.518.72.34.8
57-892Amalgamated568936533117445-3037518.920.92.03.3
57-894Amalgamated568936533117445-6351721.023.12.13.1
57-895Amalgamated568936533117452-5845715.218.33.013.5
Including      15.216.20.930.9
57-896Amalgamated568936533117456-4639617.919.92.03.2
57-900Amalgamated5689355331173357-525038.410.42.048.2
Including      8.48.70.3317.6
57-900Amalgamated5689355331173357-5250316.519.22.75.0
Including      16.817.10.320.7
57-901Amalgamated56893553311734-5848811.013.02.03.2
Including      11.612.20.610.0
57-902Amalgamated56893553311749-5450321.323.62.23.0
57-902Amalgamated56893553311749-5450328.931.02.120.2
Including      29.630.40.756.9
           
53-4111Lower SMC568756533115221-62366NSV
53-4112Lower SMC568756533115325-58351NSV
53-4113Lower SMC568756533115329-54348285.4287.52.03.9
53-4114Lower SMC568755533115331-48335264.0266.02.033.3
Including      264.5264.90.4177.6
53-4115Lower SMC568755533115324-45320264.6266.62.04.7
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
53-4116ALower SMC568755533115321-41381229.5231.52.022.0
Including      230.0230.30.3121.9
53-4116ALower SMC568755533115321-41381248.4250.42.034.1
Including      249.0249.60.6110.6
53-4116ALower SMC568755533115321-41381259.2261.22.020.2
Including      259.8260.30.583.9
53-4117ALower SMC568756533115233-65384NSV
53-4118Lower SMC568753533115434-43363255.4257.52.124.6
53-4119Lower SMC568756533115246-64396NSV
53-4120Lower SMC568753533115441-47363288.2290.32.031.8
Including      288.9289.30.4146.9
53-4121ALower SMC568753533115442-42351282.7284.72.014.8
Including      283.3284.20.931.9
53-4122Lower SMC568753533115451-60412326.4328.72.243.7
Including      327.1327.40.3229.2
53-4123Lower SMC568753533115450-54409320.6323.12.442.6
Including      321.6321.90.3142.8
53-4160Lower SMC568756533115222-54354261.5263.52.010.6
Including      263.2263.50.356.4
53-4160Lower SMC     295.4298.43.019.6
53-4161ALower SMC568756533115222-49341270.6272.62.03.9
Including      271.3272.20.97.6
53-4162Lower SMC568755533115330-50344279.2282.43.219.3
Including      279.2279.50.3121.5
Including      281.9282.40.553.4
53-4162Lower SMC568755533115330-50344331.6333.62.022.8
Including      332.5333.50.950.1
53-4164Lower SMC568755533115324-43323NSV
57-745Lower SMC5689335331172349-35412NSV
57-752Lower SMC568935533117317-62472NSV
57-779Lower SMC5689365331173357-59460453.2455.22.016.5
Including      453.2454.10.840.2
57-879Lower SMC568935533117411-50396340.2342.42.258.9
Including      340.2341.41.297.8
57-880Lower SMC568934533117211-60488410.3412.52.248.5
Including      411.8412.50.7152.8
57-781Lower SMC5689345331172358-67488NSV
57-790Lower SMC5689335331172347-42427NSV
57-794Lower SMC56893353311731-40427NSV
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
57-795Lower SMC56893353311736-45412NSV
57-805Lower SMC5689335331172357-55396NSV
57-808ALower SMC568934533117318-52396NSV
57-840Lower SMC56893453311725-64472NSV
57-841Lower SMC56893453311725-62457NSV
57-842Lower SMC568934533117213-66488NSV
57-877Lower SMC568933533117225-62457NSV
57-878Lower SMC568934533117325-65518NSV
57-894Lower SMC568936533117445-63517NSV
57-895Lower SMC568936533117452-58457NSV
57-900Lower SMC5689355331173357-52503368.8372.53.73.9
57-901Lower SMC56893553311733-60488425.9427.92.028.5
Including      426.7427.30.688.3
57-902Lower SMC56893553311749-54503364.3366.42.020.7
Including      364.8365.10.3109.6
57-903Lower SMC568935533117312-61488412.7415.12.4103.3
Including      412.7413.00.3168.3
Including      413.9414.20.3542.0
57-904Lower SMC568935533117317-66503456.5458.52.015.8
Including      458.1458.40.365.7
57-905Lower SMC568936533117325-6450317.219.42.24.0
Including      17.217.50.311.4
57-906Lower SMC568935533117425-61472413.5415.52.014.6
Including      413.5414.61.127.2
57-907Lower SMC568935533117328-63488NSV
57-946Lower SMC568935533117323-65521428.5430.72.16.0
Including      428.5428.90.321.9
57-947Lower SMC568936533117335-68536449.0451.02.08.1
57-947Lower SMC5689365331173   454.8456.92.122.4
Including      454.8455.10.3148.6
57-948Lower SMC568936533117339-64503450.3452.52.234.6
Including      450.6451.00.3182.2
57-975Lower SMC568936533117326-61457394.1398.44.349.5
Including      394.1395.31.2164.9
57-976Lower SMC568936533117435-61457405.9408.02.138.0
Including      406.2406.50.3199.7
           
           
           
Macassa Exploration 2020
Drill Hole

Zone

COLLARS - UTM NAD 83Direction Core IntervalResults
EastingNorthingAzimuth (°)DipEnd Depth (m)From (m)To (m)Length (m)Au_GPT
57-976Lower SMC568936533117435-61457431.2433.22.041.2
Including      431.7432.30.6135.5
57-977Lower SMC568935533117435-58427358.6360.62.03.1
Including      359.1359.40.317.1
           
57-992SMC5692715331688248-16427365.5379.914.5253.7
Including      368.5369.10.61,572.9
Including      371.6372.20.61,265.1
Including      374.1374.40.31,313.5
57-689**SMC5692215331373267-4027767.569.52.0100.1
57-703**SMC5692215331374273-4616845.549.13.637.7
57-704**SMC5692215331374260-4415270.574.64.1101.1

Notes:

  1. True widths are not known at this time.

* Previously reported Intercept        
**Previously unreported Intercept 

Photos accompanying this announcement are available at 

https://www.globenewswire.com/NewsRoom/AttachmentNg/7bd9300f-4e22-45aa-b4a9-d8cc78723c49

https://www.globenewswire.com/NewsRoom/AttachmentNg/75ee8797-407b-42c6-817b-2e54258374b9

https://www.globenewswire.com/NewsRoom/AttachmentNg/e890c539-0210-4c56-8b16-2f0c53e4648c

https://www.globenewswire.com/NewsRoom/AttachmentNg/02ac5889-fe46-4c5b-9b7c-a76874af6d2d

Primary Logo

Figure 1.

Plan View – SMC, Lower SMC and Amalgamated Zones
Figure 2.

Longitudinal View – Drilling and Assays on the Lower SMC
Figure 3.

Longitudinal View – Drilling and Assays on the Amalgamated Break
Figure 4.

Oblique Section – Drilling and Assays on the SMC and Amalgamated Break

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok