Orsu Metals Reports Multiple Gold-Mineralized Intercepts in Drill Holes and Trenches at Adit 5, Sergeevskoe Gold Project, Russia

2018-10-15 / @accesswire

 

WHITE ROCK, BC / ACCESSWIRE / October 15, 2018 / Orsu Metals Corporation (TSX-V: OSU) ("Orsu" or the "Company") is delighted to announce drilling results from 15 drill holes and 3 trenches at Adit 5, as part of the extended 12,500 meters ('m') drilling program at its Sergeevskoe Gold Project in Russia. The program is designed to deliver an estimation of a maiden resource in Q4 2018.

Highlights:

  • Fifteen drill holes and three trenches within a 450x250 m area at Adit 5 revealed 15 northwest- to northeast-striking gold-mineralized veins

  • The gold grade of mineralized intervals in drill holes at Adit 5 varies from 0.52 g/t Au to 3.07 g/t Au over a variable drill width of 2 to 21.8 m in primary quartz-sulfide veins, with higher grade mineralization, grading up to 6.49 g/t Au over 11.5 m, intercepted in oxidized material in trenches

Dr. Alexander Yakubchuk, Director of Exploration of Orsu commented: "Instead of finding the historically anticipated presence of 4 to 5 northwest-trending gold-quartz-sulfide veins at Adit 5, Orsu identified gold in 15 closely-spaced fan-shaped northwest to northeast-striking mineralized zones within a 450x250 m area. The vein swarms in the west and east of Adit 5 are grading on average between 0.52 g/t Au and 3.07 g/t Au over a variable drill width of 2 to 21.8 m to a depth of 100-200 m. The combined drill width of some closely spaced gold-mineralized veins, intercepted in individual drill holes varies from 4 to 61 m. In the north, mineralization at Adit 5 almost orthogonally joins the eastern part of Zone 23, therefore occurring on the southeastern flank of Zone 23. Orsu believes that gold mineralization at Adit 5 significantly expands the resource potential for the forthcoming NI43-101 estimate".

Dr Sergey V Kurzin, Executive Chairman of Orsu, commented: "Results from the Adit 5 zone nicely complement the adjacent Zone 23 area, the backbone of the Sergeevskoe project, and will likely add to Orsu's maiden mineral resource estimate. Our drilling contractors completed the work last week and are demobilizing now. Our geological team expects to receive all pending assays shortly and, supported by Orsu's competent person, Wardell Armstrong International will immediately get down to work of estimating the maiden NI43-101 resource."

The license of the Sergeevskoe Gold Project occurs immediately east from the Alexandrovskoe open pit and gold plant owned by Zapadnaya Gold Mining Ltd and to the west from the +6 Moz Klyuchevskoe gold deposit licensed to Sun Gold Mining (Figure 1)1. Orsu owns a 90% interest in the Sergeevskoe Gold Project (see Orsu press-release December 1, 2017).

To view the graphic in its original size, please click here

Figure 1. An outline of the 7.6 sq km Sergeevskoe license area with location of principal gold prospects and two adjacent open pits.

Orsu has now received assay results for all 2018 drill holes and trenches at Adit 5. The quartz-tourmaline-sulfide veins are hosted primarily in the pre-mineral Permian granite intrusion, often controlled by the contacts of Jurassic diorite porphyry and granodiorite porphyry dykes.

The Northwestern Fault divides the Adit 5 area into western and eastern domains with dextral strike-slip sense of movement between them, interpreted based on truncation and offset of the dykes (Figure 2). Using the dykes as markers, the minimum displacement can be estimated in 100 m at least.

The orientation of the quartz-tourmaline-sulfide veins in the Adit 5 West domain is northwestern to northern, whereas in the Adit 5 East domain their strike is predominantly northeastern. Orsu identified 15 mineralized veins in each domain. Some of them may represent offset continuation of the same veins in the two domains.

Although the mineralization becomes narrow southward, it remains open in that direction and downdip. The gold-mineralized veins are widening to the north towards the eastern part of Zone 23, where veins in both Zone 23 and Adit 5 are truncated by the Shirotnyi Fault. In addition, north of the Shirotnyi fault are the gold-mineralized veins of the southern part of Klyuchi West, already reported for the drill holes SDH18-25, 26, 27, 28 (see Orsu press release July 16, 2018). Orsu drilled additional holes to test the downdip extent of mineralization, with results pending.

1 Business Standard, a leading Indian daily newspaper, reported on 21 September 2018 that "Chinese company China National Gold will invest about $420 million in the development of the Klyuchevskoye gold deposit in Russia, while another $65 million will be invested by India's SUN Gold. The annual production volume is expected at about 6.5 metric tons of gold per year, the Russian Industry and Trade Ministry reported."

To view the graphic in its original size, please click here

Figure 2. Surface expression of multiple west-east-trending gold mineralization in Main, Southern and New stockworks at Zone 23 and northwest- to northeast-trending gold mineralization at Adit 5 and southern part of Klyuchi West, Sergeevskoe Gold Project.

In Adit 5 West domain, the veins are steeply-dipping, with the westernmost veins dipping to the southwest (Figure 3). They reveal a propeller-like shape along the strike. There is increase in grade downdip even in comparison with the trenches, although in oxide is the widening of mineralized intervals, which also reveal supergene enrichment and higher gold grade.

To view the graphic in its original size, please click here

To view the graphic in its original size, please click here

Figure 3. Example cross-sections of gold-mineralized veins in Adit 5 West domain (looking northwest). The view is +/-20 m. See Table 1 below for assay results in individual drillholes and trenches.

In Adit 5 East domain, the veins are also steep (Figure 4), broadly northwest- to north-dipping. There is widening of mineralization in oxide zone, which developed down to 25-30 m from surface. In hypogene mineralization, the drilling demonstrated that the width of veins doubles at deeper levels. The mineralization remains open downdip.

To view the graphic in its original size, please click here

Figure 4. Example cross-section of gold-mineralized veins in Adit 5 East domain (looking northeast). The view is +/-20 m. See Table 1 below for assay results in individual drillholes and trenches.

The above interpretations are based on selection of the previously and newly-reported mineralized intervals, based on a 0.5g/t Au cut-off for compositing, with maximum 2 m length of 0.3-0.5 g/t Au mineralization included into a mineralized interval. Composited intervals in drill holes are presented uncapped (Table 1).

Table 1. Mineralized intercepts in drill holes and trenches at Adit 5 (above 0.5 g/t Au cut-off).

Number

From

(m)

To

(m)

Interval

(m)

True Width

(m)

Gold

(g/t)

Stockwork

Drillhole

SDH18-24a (18.65 m)

Redrilled top of SDH18-24

Azimuth 0, Dip 59

Drillhole

SDH18-24 (154 m)

Azimuth 0, Dip 59

6.5

17.25

10.75

Drilled downdip

1.06

Adit 5 East

18.4

27.2

8.8

Drilled downdip

1.13

Adit 5 East

40.05

55.2

15.15

Drilled downdip

0.61

Adit 5 East

77.25

84.35

7.1

Drilled downdip

0.52

Adit 5 East

116.55

121.25

4.7

Drilled downdip

1.13

Adit 5 East

Drillhole

SDH18-32 (244 m)

Azimuth 200, Dip 60

37.1

41.0

3.9

Oblique to strike

1.68

Adit 5 East

38.7

41.0

2.3


2.47

Adit 5 East

51.2

66.45

15.25

Oblique to strike

0.99

Adit 5 East

85.5

87.5

2.0

Oblique to strike

1.82

Adit 5 East

91.85

94.95

3.1

Oblique to strike

1.1

Adit 5 East

124.0

126.25

2.25

Oblique to strike

0.56

Adit 5 West

132.1

134.0

1.9

1.0

0.95

Adit 5 West

141.5

152.4

10.9

6.2

1.43

Adit 5 West

159.05

160.15

1.1

0.6

4.34

Adit 5 West

Drillhole

SDH18-33 (277.4 m)

Azimuth 185, Dip 50

33.3

35.0

1.7

1.5

0.78

Klyuchi West

77.6

81.4

3.8

3.4

1.28

Klyuchi West


118.8

121.1

2.3

2.1

2.05

Klyuchi West

133.0

135.95

2.95

2.6

0.63

Klyuchi West

147.15

153.6

6.45

5.8

1.43

Adit 5 East

147.15

147.9

0.75


8.2


206.6

209.1

2.5

2.25

1.12

Adit 5 East

227.1

234.45

7.35

6.65

0.95

Adit 5 East

Drillhole

SDH18-36 (139.1 m)

Azimuth 230, Dip 60

10.35

14.1

3.75

1.9

0.81

Adit 5 East

115.95

119.55

3.6

1.8

0.93

Adit 5 East

123.5

129.35

5.85

2.9

0.63

Adit 5 East

Drillhole

SDH18-47 (132.1 m)

Azimuth 180, Dip 50

9.1

14.5

5.4

4.9

2.65

Adit 5 East

22.3

23.2

0.9

0.8

2.3

Adit 5 East

27.6

39.2

11.6

10.5

0.78

Adit 5 East

61.8

64.8

3.3

3.0

1.0

Adit 5 East

122.85

128.35

5.5

5.0

0.8

Adit 5 East

Drillhole

SDH18-48 (244.3 m)

Azimuth 230, Dip 50

5.4

22.6

16.8

13.4

1.02

Adit 5 West

29.2

40.45

11.25

9.0

1.12

Adit 5 West

63.5

67.2

3.7

2.3

2.36

Adit 5 West

97.05

98.15

1.1

0.8

3.55

Adit 5 West

119.4

122.3

2.9

2.3

1.54

Adit 5 West

136.25

138.5

2.25

1.8

1.11

Adit 5 West

169.7

171.05

1.35

1.1

8.5

Adit 5 West

Drillhole

SDH18-49 (200.7 m)

Azimuth 231, Dip 50

17.7

36.0

18.3

14.7

1.34

Adit 5 West

46.7

49.7

3.0

2.4

3.07

Adit 5 West

47.6

48.6

1.0


7.95


53.0

74.8

21.8

17.4

0.91

Adit 5 West

87.1

90.7

3.6

2.9

0.87

Adit 5 West

96.5

107.15

10.65

8.4

0.95

Adit 5 West

100.35

103.35

3.0


1.95


113.85

117.5

3.65

2.9

0.67

Adit 5 West

199.6

200.7

1.1

0.8

2.96

Adit 5 West

Drillhole

SDH18-50 (213.5 m)

Azimuth 230, Dip 50

118.5

122.55

4.05

2.9

1.07

Adit 5 West

125.45

140.75

15.3

11.8

0.93

Adit 5 West

144.75

151.8

7.05

5.5

0.67

Adit 5 West

170.0

188.6

18.6

13.2

0.74

Adit 5 West

Drillhole

SDH18-51 (153.65 m)

Azimuth 90, Dip 60

6.85

11.75

5.9

4.7

0.54

Adit 5 West

26.2

41.25

15.05

12.0

0.62

Adit 5 West

80.85

82.95

2.1

1.65

0.79

Adit 5 West

115.65

118.35

2.7

2.16

0.62

Adit 5 West

124.5

126.0

1.5

1.2

8.53

Adit 5 West

Drillhole

SDH18-52 (150.4 m)

Azimuth 40, Dip 50

11.9

13.9

2.0

1.6

0.78

Adit 5 West

32.65

42.05

9.4

7.5

1.19

Adit 5 West

45.6

52.45

6.85

5.5

2.0

Adit 5 West

57.55

60.95

3.4

2.7

0.76

Adit 5 West

Drillhole

SDH18-53 (138.25 m)

Azimuth 120, Dip 50

2.65

20.5

17.85

13.6

0.9

Adit 5 East

33.9

35.6

1.7

1.3

1.15

Adit 5 East

39.35

43.85

4.5

3.2

1.16

Adit 5 East

55.25

58.35

3.1

2.35

0.85

Adit 5 East

63.6

64.75

1.15

0.8

3.44

Adit 5 East

130.65

131.45

0.8

0.55

1.54

Adit 5 East

Drillhole

SDH18-54 (199.65 m)

Azimuth 120, Dip 50

41.5

48.05

6.55

5.2

0.74

Adit 5 East

51.65

58.05

6.4

5.1

1.32

Adit 5 East

67.85

69.6

1.75

1.3

1.12

Adit 5 East

74.1

79.6

5.5

4.3

0.84

Adit 5 East

91.0

94.6

3.6

2.7

1.38

Adit 5 East

98.7

105.4

6.7

5.3

1.28

Adit 5 East

111.05

116.5

5.45

4.3

0.83

Adit 5 East

131.0

137.25

6.25

5.0

0.74

Adit 5 East

166.0

173.1

7.1

5.4

0.86

Adit 5 East

Drillhole

SDH18-60 (200.6 m)

Azimuth 350, Dip 49

57.8

61.95

4.15

2.1

0.6

Adit 5 East

82.1

95.4

13.3

6.5

1.03

Adit 5 East

140.3

143.9

3.6

1.8

1.29

Adit 5 East

158.65

161.6

2.95

1.5

0.55

Adit 5 East

172.85

174.95

2.1

1.1

1.2

Adit 5 East

193.9

196.3

2.4

1.2

0.96

Klyuchi West

Drillhole

SDH18-61 (100.2 m)

Azimuth 310, Dip 50

5.5

12.95

7.45

4.5

1.21

Adit 5 East

39.25

40.35

1.1

0.65

1.37

Adit 5 East

61.2

68.35

7.15

4.2

0.48

Adit 5 East

Trench

STR18-23 (127.6 m)

13.3

26.2

12.9


1.32

Adit 5 West

31.3

36.7

5.4


1.54

Adit 5 West

56.2

58.2

2.0


0.76

Adit 5 West

88.0

90.0

2.0


0.68

Adit 5 West

94.0

117.0

23.0


1.6

Adit 5 East

121.2

126.5

5.3


4.01

Adit 5 East

Trench

STR18-24 (99 m)

9.5

21.0

11.5


6.49

Adit 5 West

24.7

28.0

3.3


1.12

Adit 5 West

40.0

51.0

11.0


1.32

Adit 5 West

66.0

80.0

14.0


1.42

Adit 5 West

91.7

95.0

4.3


0.62

Adit 5 West

Trench

STR18-25 (102 m)

0

25.8

25.8


1.42

Adit 5 East

43.5

50.5

7.0


0.74

Adit 5 East

54.3

57.5

3.2


0.74

Adit 5 East

75.0

77.0

2.0


0.72

Adit 5 East

81.0

83.0

2.0


0.79

Adit 5 East

Quality Assurance - Quality Control ("QA/QC")

Thorough QA/QC protocols are followed on the project including insertion of duplicate, blank and standard samples in all trenches. Duplicate samples were inserted after every 20 samples. All standard samples were inserted once per 20 samples. Blanks were also inserted once per 20 samples and consisted of the previously assayed barren granitoid rocks.

Drill core samples were submitted directly to the SGS Vostok laboratories in Chita, Russia, which are independent from Orsu, for sample preparation and analysis. Analysis for Au is performed using fire assay method with atomic absorption ("AA") finish and with a gravimetric finish for samples exceeding 10g/t Au. Results published are from the gravimetric finish if above 10g/t Au and from the AA finish if lower than 10g/t Au.

Qualified Person

This release and the technical data reported have been reviewed and approved by Alexander Yakubchuk, Director of Exploration of the Company, also a Qualified Person as defined in NI 43-101.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Statement:

This news release contains forward-looking statements that are based on the Company's current expectations and estimates. Forward-looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or statements that certain events or conditions "may" or "will" occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements. There may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.

For further information, please contact:

Alexander Yakubchuk, Director of Exploration, Orsu Metals Corporation

Doris Meyer, Corporate Secretary, Orsu Metals Corporation

Tel: +1-604-536-2711 ext 6

www.orsumetals.com

SOURCE: Orsu Metals Corporation

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok