Perseus Mining Updates Life of Mine Plan for Sissingu?(C) Gold Mine & Satellite Deposits

2022-03-27 / @nasdaq

 

PERTH, Western Australia, March 27, 2022 (GLOBE NEWSWIRE) -- Perseus Mining Limited (ASX/TSX: PRU) has updated its Life of Mine Plan (“LOMP”) for its Sissingué Gold Mine (“SGM”) and satellite deposits, Fimbiasso and Bagoé, in Côte d’Ivoire (collectively “Sissingué”).

HIGHLIGHTS

  • The mine life for Sissingué has been extended to March 2026 with potential for further extension by processing low grade ore stockpiles.
  • Average annual gold production is currently forecast at 72,000 ounces at an average all-in site cost (ASIC) of US$1,261 per ounce.
  • Updated Mineral Resources are estimated at 7.2 million tonnes grading 1.7 g/t gold containing 394,000 ounces of gold at December 31, 2021.  
  • Proved and Probable Ore Reserves1 total 5.0 million tonnes of ore grading 1.8g/t gold and containing 282,000 ounces of gold with ore drawn from pits at Sissingué, Fimbiasso and Bagoé deposits.
  • Key Sissingué LOMP2 parameters include:
KEY PARAMETERSUNITSUPDATED
LIFE OF MINE PLAN
ANNUAL AVERAGE
FY2023 – FY2025
Total Ore + waste minedMt24.17.4
Strip ratiot:t4.6:14.4:1
Ore processedMt5.51.5
Head gradeg/t gold1.61.7
Gold recovery rate%91.291.4
Gold production‘000 ozs25272
    
Production costsUS$/oz1,1641,173
Royalty1US$/oz6363
Sustaining capitalUS$/oz2525
Average All-in site costsUS$/oz1,2531,261

Notes:

  1. Assumes a gold price of US$1,500 per ounce for Ore Reserve and royalty calculations.
  2. LOMP commences on July 1, 2022.

Perseus’s Managing Director and CEO Jeff Quartermaine said:

“The Sissingué Gold Mine has been an important part of Perseus’s geopolitically diversified asset portfolio since commencing commercial production in 2018 with an estimated 4.5-year mine life. Since then, the mine has consistently produced gold in excess of forecasts and importantly, generated significant amounts of free cashflow. This updated LOMP incorporates the processing of ore from satellite deposits at Fimbiasso and Bagoé as well as the Sissingué Gold Mine, and results in the life of the Sissingué operation being extended out till at least March 2026 which enables Perseus to continue generating material benefits for all of our stakeholders, including the residents of our host communities at Fimbiasso and Bagoé.”

Overview of Sissingué

Sissingué is located in northern Cote d’Ivoire in the West African Craton where gold is mined in Paleoproterozoic (Birimian) rocks of the southern extension of the Syama Greenstone Belt and the western margin of the Senoufo Greenstone Belt. Gold deposits at Sissingué are orogenic, greenstone hosted.

The SGM main pit mineralisation is structurally controlled and mainly hosted within a granitic stock associated with a network of quartz-carbonate veins and veinlets with associated pyrite and arsenopyrite dissemination. Gold-bearing veins have a dominant NNW to NS trend and are steeply dipping. Disseminated mineralisation is also located in the alternation envelops of the mineralised quartz veins.

SGM commenced commercial gold production at the end of March 2018 and by 30 June 2022 approximately 367,500 ounces of gold are forecast to have been produced at the mine. The sources of ore to be processed at Sissingué during the remaining 3.7 years of mine life, as currently defined, are SGM, Fimbiasso and Bagoé deposits. Each deposit consists of multiple pits and the ore feed will be supplemented with stockpiles at SGM as detailed in Table 3. To ensure the mill is run at full capacity in the last seven months of mine life, reducing processing and general administration (G&A) unit rate costs, stockpiled mineralised waste will be used to supplement ore feed. Ore from Fimbiasso and Bagoé will be stockpiled temporarily on site then transported to Sissingué for process plant feed as per milling schedule. Waste material will be taken to the waste dump located near the pits. Tailings from the process plant will be stored in a single, plastic high-density polyethylene (HDPE) lined, tailings storage facility located near the Sissingué process plant.

Many of Sissingué’s operational workforce live in the communities located near the existing mine and processing facility, and the satellite deposits. An on-site camp has been constructed at SGM to accommodate members of the workforce who are not local residents.

Figure 1 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/5849bbd8-5a71-4ea5-b894-1b15d5df0dda

Figure 2 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/a82240f2-5b70-4f8f-8d4a-a921536cfd51

Figure 3 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/2a80cbe4-6337-46ba-a22f-40b927965153

Figure 4 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/bc888168-89f7-4939-b629-b8008ff7f6c3

MINERAL RESOURCES AND ORE RESERVES SUMMARY

For a comprehensive description of SGM Mineral Resources and Ore Reserves estimates, refer to the JORC tables included in Appendix 1, and to the news release titled “Perseus Mining Updates Mineral Resources and Ore Reserves” dated 26 August 2020 for all reference to the Fimbiasso Deposits and to the news release titled “Perseus Mining Updates Mineral Resources and Ore Reserves” dated 24 August 2021 for the Bagoé Deposits. Table 1, 2 and 3 below summarise the currently estimated Mineral Resources and Ore Reserves at Sissingué.

Table 1: Sissingué Measured and Indicated Mineral Resources – 31 December 2021 1,2

PROJECT
DEPOSIT TYPE
MEASURED RESOURCESINDICATED RESOURCESMEASURED + INDICATED RESOURCES
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Sissingué 3,4,5Open Pit1.21.4501.31.4562.41.4107
Fimbiasso 6,7Open Pit1.71.7950.41.8232.11.7118
Bagoé 8,9Open Pit0.72.2531.02.3731.72.3126
Sub Total3.61.71982.71.81526.21.8351
Stockpiles 0.71.330---0.71.330
Total4.31.62272.71.81527.01.7379

Table 2: Sissingué Inferred Mineral Resources – 31 December 2021 2

PROJECT
DEPOSIT TYPE
INFERRED RESOURCES
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Sissingué 3,4,5Open Pit0.11.12
Fimbiasso 6,7Open Pit0.11.86
Bagoé 8,9Open Pit0.12.26
Sub Total0.31.514
Stockpiles ---
Total0.31.815

Notes:

   1. Measured and Indicated Mineral Resources are inclusive of Ore Reserves.
   2. Rounding of numbers to appropriate precisions may have resulted in apparent inconsistencies.
   3. Based on February 2022 Mineral Resource model constrained to US$1,800/oz pit shell.
   4. Depleted to 31 December 2021 mining surface.
   5. 0.6g/t gold cut-off applied to in situ material.
   6. Based on March 2020 Mineral Resource models constrained to US$1,800/oz pit shells.
   7.  0.8g/t gold cut-off applied.
   8.  Based on May 2021 Mineral Resource models constrained to US$1,800/oz pit shells.
   9. 0.8g/t gold cut-off applied to oxide, 1g/t applied to transition, 1.2g/t applied to fresh (Veronique deposit only).

Table 3: Proved and Probable Ore Reserves as at 31 December 2021 5, 7

DEPOSIT
DEPOSIT TYPE
PROVEDPROBABLEPROVED + PROBABLE
Quantity
Mt
Grade
g/t gold
Gold
‘000 oz
Quantity
Mt
Grade
g/t gold
Gold
‘000 oz
Quantity
Mt
Grade
g/t gold
Gold
‘000 oz
Sissingué1,2,3,4Open Pit1.01.3400.91.3371.91.378
Fimbiasso2,4Open Pit1.12.0700.22.2131.32.083
Bagoé2,3,4Open Pit0.52.6400.62.6511.12.691
Sub Total2.61.81501.71.91014.31.8251
Stockpiles6 0.71.330---0.71.330
Total3.31.71811.71.91015.01.8282

Notes:
1 Depleted to 31 December 2021 mining surface. 
2 Based on February 2022 Mineral Resource model constrained to US$1,800/oz pit shell and depleted to 31 December 2021 mining surface. 
3 Based on February 2022 Ore Reserve estimation. 
4 Variable gold grade cut-off for each material type, ranging from 0.40 g/t to 1.00 g/t at Sissingué deposits, from 0.80 g/t to 1.50 g/t at Fimbiasso deposits and from 1.00 g/t to 3.00 g/t at Bagoé deposits. 
5 Inferred Mineral Resource is considered as waste.
6 Based on EOM December 2021 stockpile balance report. 
7 Rounding of numbers may result in apparent mathematical inconsistencies. 

LIFE OF MINE PLAN

Based on detailed mining and processing schedules recently prepared as part of the life of mine planning process, the key forecast operating parameters for Sissingué are summarised in Table 4. To illustrate the changes to the FY23 LOMP from the previous FY22 LOMP published in August 2021, equivalent data is tabulated below. It should be noted that the FY23 LOMP commences 1 July 2022 and accounts for actual depletion of Ore Reserves between July 2021 to December 2021 and forecast depletion between 1 January 2022 and 30 June 2022.

Mining cost estimates in the updated LOMP are based on projected costs using the current contract with mining contractors, SFTP, who have been conducting mining activities on site since mining operations started. SFTP is expected to perform the full mining, drilling and grade control service required at Sissingué. Explosive costs are based on the projection of current contract prices provided by contractor, Maxam, a leading explosives manufacturer and distributor.

Gold recovery rates and processing costs are based on actual results achieved in the last 12 months and combined with forward projections based on a comprehensive metallurgical test work program for areas with no experiential data. Processing costs include costs associated with all consumables including maintenance, electricity, fuel, labour, and other processing overheads.

G&A and other costs are based on actuals and budget projections. G&A operating costs include all labour costs, Abidjan regional office costs, HR administration costs as well as all costs associated with the management of the environment, OH&S, security, government and community relations, general administration including insurances and other contracts.

Sustaining capital costs include stage lifting of the tailings storage facility (TSF), closure costs, progressive clearing, contractor demobilisation, and plant modifications. The total estimate of sustaining capital is US$7.6M million which over the current life of mine equates to US$30/oz of gold produced. Sustaining capital does not include any capital costs estimated for the delineation of additional Mineral Reserves and Ore Reserves or the establishment of new open pit or underground mining operations. Any such developments will be regarded as development capital and disclosed accordingly.

Table 4: Overview Key Parameters4

 UNITS
FY23 LOMP
Total
FY23-26
Annual Average
FY23-25
Mining   
Total ore + waste minedMt24.117.4
Waste minedMt19.816.0
Ore minedMt4.311.4
Mined gradeg/t gold1.811.7
Strip ratiot:t4.6:114.4:1
Processing   
Quantity ore processedMt5.51.5
Head grade processedg/t gold1.61.7
Contained gold‘000ozs27779
Gold recovery rate%91.291.4
Gold production‘000ozs25272
Operating Costs2   
Average mining costsUS$/t mined5.8225.96
Average processing costsUS$/t processed15.9616.47
Average general & administration costsUS$/t processed12.0212.11
Production costsUS$/oz1,1641,173
Royalty3US$/oz6363
Sustaining capitalUS$/oz2525
All-in site costsUS$/oz1,2531,261

Notes:

1 Includes all ore and waste mined ex-pit but excludes rehandle movement.

2 Excludes pre-strip costs that have been capitalised.

3 Assumes a gold price of US$1,500/oz for Ore Reserve and Royalty calculations, and US$1,250/oz for the DFS.

4 LOMP commences 1 July 2022.

MINING AND PROCESSING SCHEDULES

Based on the estimated Ore Reserves summarised in Table 2: Sissingué Inferred Mineral Resources – 31 December 20212

PROJECT
DEPOSIT TYPE
INFERRED RESOURCES
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Sissingué 3,4,5Open Pit0.11.12
Fimbiasso 6,7Open Pit0.11.86
Bagoé 8,9Open Pit0.12.26
Sub Total0.31.514
Stockpiles ---
Total0.31.815

Notes:

   10. Measured and Indicated Mineral Resources are inclusive of Ore Reserves.
   11. Rounding of numbers to appropriate precisions may have resulted in apparent inconsistencies.
   12. Based on February 2022 Mineral Resource model constrained to US$1,800/oz pit shell.
   13. Depleted to 31 December 2021 mining surface.
   14. 0.6g/t gold cut-off applied to in situ material.
   15. Based on March 2020 Mineral Resource models constrained to US$1,800/oz pit shells.
   16.  0.8g/t gold cut-off applied.
   17.  Based on May 2021 Mineral Resource models constrained to US$1,800/oz pit shells.
   18. 0.8g/t gold cut-off applied to oxide, 1g/t applied to transition, 1.2g/t applied to fresh (Veronique deposit only).

, the mining production profile for Sissingué is forecast to be as shown in Error! Reference source not found. below. No Inferred Mineral Resources have been included as mill feed in the updated LOMP.

Ore and waste will be mined from all Sissingué pits. Ore from the Fimbiasso and Bagoé deposits will be stockpiled temporarily on their respective sites then transported to SGM for processing as per the mill feed schedule. Mill feed will be complimented with the remaining ore stockpiles at Sissingué, with additional feed supplement coming from mineralised waste material to ensure the mill runs full capacity in the final seven months of mine life, minimising the processing and G&A unit rate costs.

Mining is currently expected to be complete within four years of operation from 1 July 2022. Mining will start at SGM and Fimbiasso deposits in the first 18 months, the majority of ore feed will come from Fimbiasso. At this time mining at SGM will be mostly from satellite pits and waste stripping of the main pit, during which time mining will be accelerated at the Fimbiasso deposit. Current ore stockpiles will supplement mill feed as required. After mining at Fimbiasso is complete, Bagoé mining is scheduled to start following equipment relocation. Mining of the SGM deposit will continue while the Bagoé deposit is being mined. In this period, mining at SGM Main pit will be sufficiently advanced to mine high-grade ore and complement lower feed grade ore from Bagoé. This will result in higher gold production in FY25 compared to previous years.

Figure 5 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/ff525f27-2fde-4fab-bde8-9293447fb844

Gold production in FY23 will mainly be derived from ore sourced from Fimbiasso deposit, oxide ore from SGM satellite deposits and existing stockpiles at SGM. Meanwhile, the pre-strip in the SGM main pit will be undertaken to access the ore zone. Pre-stripping at SGM main pit is expected to take 18 months before access into the main ore zone is achieved.

In FY24, mining in Fimbiasso will be completed in the first half of the year and will be replaced by Bagoé deposit as the main ore source. By second half of FY24, the main ore zone in the SGM main pit will be exposed. Stockpiled material will sustain mill feed at full capacity.

The highest production year in the LOMP is FY25. In this period, high grade ore will be mined from both the SGM main pit and the Bagoé deposit. Ore from Bagoé will provide the main source of high-grade mill feed ore. Mining at the SGM main pit will be completed by the third quarter of FY25, requiring ore from Bagoé deposit to be supplemented with remaining stockpiles available at SGM during the fourth quarter.

Based on the LOM schedule, mining and processing at SGM will be completed in FY26. Mining will be finished in February 2026 and processing will be completed the following month, March 2026. In this period the mill feed will be supplied from Bagoé deposit supplemented with stockpiled mineralised waste. The use of mineralised waste will enable the mill to operate at full capacity, resulting in lower unit processing costs and G&A. By the end of March 2026, approximately 650,000 tonnes of mineralised waste stockpiles will remain. This material may be processed at a later date subject to it being economically viable.

The processing rate is forecast to average 1.4 million tonnes per year over the 3.7 years of mine life. The processing rate in this LOM has been increased from the previous LOM from 220tpoh to 260tpoh and is based on experiential knowledge and current milling rates experienced at SGM.

The forecast average gold production for the remaining mine from 1 July 2022, is estimated at approximately 72,000 ounces at an average head grade of 1.7g/t and an average metallurgical recovery of 91.4%. A total of 252,000 ounces of gold are forecast to be recovered over the life of operation.

Figure 6 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/b42f50db-eefc-426c-bc2c-b0a706db730e

This announcement was approved for release by Perseus Mining Limited’s Managing Director and CEO, Jeff Quartermaine.

Competent Person Statement:

All production targets referred to in this report are underpinned by estimated Ore Reserves which have been prepared by competent persons in accordance with the requirements of the JORC Code. 

The information in this report that relates to Mineral Resources for Sissingué is based on information compiled by Ms Christine Shore, a Competent Person who is a Fellow of The Australian Institute of Mining and Metallurgy. Ms Shore is a full-time employee of Perseus Mining, and she has no economic, financial or pecuniary interest in the company. Ms Shore has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activities which she is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” and a Qualified Person as defined in NI43-101. Ms Shore consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.

The information in this report that relates to Mineral Reserves for the Sissingué deposit is based on information compiled by Mr Craig Fawcett, FAusIMM CP, who is a full-time employee of Perseus Mining. Mr Fawcett has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activities which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” and a Qualified Person as defined in NI43-101. Mr Fawcett consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.

The information in this report that relates to Mineral Resource and Ore Reserve estimates for the Fimbiasso deposits was first reported by the Company in a market announcement “Perseus Mining Updates Mineral Resources and Ore Reserves” released on 26 August 2020.  The information in this report that relates to Mineral Resource and Ore Reserve estimates for the Bagoé deposits was first reported by the Company in a market announcement “Perseus Mining Updates Mineral Resources and Ore Reserves” released on 24 August 2021.    The Company confirms that all material assumptions underpinning those estimates and the production targets, or the forecast financial information derived therefrom, in that market release continue to apply and have not materially changed. The Company further confirms that material assumptions underpinning the estimates of Ore Reserves described in “Technical Report — Sissingué Gold Project, Côte d’Ivoire” dated 18 December 2017 continue to apply.

Caution Regarding Forward Looking Information:

This report contains forward-looking information which is based on the assumptions, estimates, analysis and opinions of management made in light of its experience and its perception of trends, current conditions and expected developments, as well as other factors that management of the Company believes to be relevant and reasonable in the circumstances at the date that such statements are made, but which may prove to be incorrect. Assumptions have been made by the Company regarding, among other things: the price of gold, continuing commercial production at the Sissingué Gold Mine, the Edikan Gold Mine and the Yaouré Gold Mine without any major disruption due to the COVID-19 pandemic or otherwise, the receipt of required governmental approvals, the accuracy of capital and operating cost estimates, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain financing as and when required and on reasonable terms. Readers are cautioned that the foregoing list is not exhaustive of all factors and assumptions which may have been used by the Company. Although management believes that the assumptions made by the Company and the expectations represented by such information are reasonable, there can be no assurance that the forward-looking information will prove to be accurate. Forward-looking information involves known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any anticipated future results, performance or achievements expressed or implied by such forward-looking information. Such factors include, among others, the actual market price of gold, the actual results of current exploration, the actual results of future exploration, changes in project parameters as plans continue to be evaluated, as well as those factors disclosed in the Company's publicly filed documents. The Company believes that the assumptions and expectations reflected in the forward-looking information are reasonable. Assumptions have been made regarding, among other things, the Company’s ability to carry on its exploration and development activities, the timely receipt of required approvals, the price of gold, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain financing as and when required and on reasonable terms. Readers should not place undue reliance on forward-looking information. Perseus does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

ASX/TSX CODE: PRU

REGISTERED OFFICE:

Level 2, 437 Roberts Road
Subiaco WA 6008

Telephone: +61 8 6144 1700
Email: IR@perseusmining.com

WWW.PERSEUSMINING.COM
CONTACTS:

Jeff Quartermaine
Managing Director & CEO
jeff.quartermaine@perseusmining.com

Nathan Ryan
Media Relations
+61 4 20 582 887
nathan.ryan@nwrcommunications.com.au

Claire Hall
Corporate Communications
+61 414 558 202
claire.hall@perseusmining.com


APPENDIX 1:

Sissingué Gold Mine Mineral Resources & Ore Reserves

Mineral Resource Statement

Material information summary as required under ASX Listing Rule 5.8 and JORC 2012 reporting guidelines.

The Mineral Resource Statement for the Sissingué Gold Mine (SGM) is reported in accordance with the 2012 Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (the JORC Code). The classification categories of Measured, Indicated and Inferred under the JORC Code are equivalent to the Canadian Institute of Mining, Metallurgy and Petroleum categories of the same names (CIM, 2014).

This Mineral Resource Estimate (MRE) update includes an additional 24,700 m drilling from 528 Reverse Circulation (RC) holes, drilled in 2021 and is reported excluding mining activity, surveyed up to 31 December 2021 and limited within a constraining pit shell generated at US$1,800 an ounce with updated Sissingué mining and processing costs.

The SGM MRE is comprised of the remaining in situ mineralisation at the SGM mine and material on stockpiles as of 31 December 2021. A total of 46,377 metres of drilling from 13,703 drill holes was available for this MRE. Mineralisation interpretations were informed by Reverse Circulation and Diamond Drilling.

This MRE comprises Inferred Mineral Resources which are unable to have economic considerations applied to them, nor is there certainty that they will be converted to Measured or Indicated Resources through further sampling. The in situ Mineral Resources are potentially exploitable by open pit mining methods.

The information provided in the JORC 2012 Table 1 – Section 3 Estimation and Reporting of Mineral Resources applies to this MRE.

The combined global Mineral Resource for the SGM is estimated as 2.6Mt grading 1.3 g/t gold, containing 108,000 ozs of gold. Additional stockpile inventory, provide a total global Mineral Resources of 7.3Mt @ 1.3g/t for 135,000ozs as shown below in Table 1.

Table 1: SGM Measured and Indicated Mineral Resources – 31 December 2021 1,2,3,4,5

DEPOSIT
DEPOSIT TYPE
MEASURED RESOURCESINDICATED RESOURCESMEASURED + INDICATED RESOURCES
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
SissinguéOpen Pit1.21.4501.31.4562.41.4107
StockpilesOpen Pit0.71.330---0.71.330
Total1.81.3801.31.4563.11.4135

Table 2: SGM Inferred Mineral Resources – 31 December 2021 2,3,4,5

DEPOSIT
DEPOSIT TYPE
INFERRED RESOURCES
Quantity
Mt
Grade
g/t gold
Gold
'000 oz
SissinguéOpen Pit0.11.12
Total0.11.12

Notes:

1 Measured and Indicated Mineral Resources are inclusive of Ore Reserves.
2 Rounding of numbers may have resulted in apparent mathematical inconsistencies.
3 Based on February 2022 Mineral Resource model constrained to US$1,800/oz pit shell.
4 Depleted to 31 December 2021 mining surface.
5 0.6g/t gold cut-off applied to in situ material.

Geology and geological interpretation

The SGM is located in the West African Craton and covers the Paleoproterozoic (Birimian) rocks of the southern extension of the Syama Greenstone Belt and the western margin of the Senoufo Greenstone Belt. Gold deposits at the SGM are orogenic, greenstone hosted in nature.

The SGM main pit mineralisation is structurally controlled and mainly hosted within a granitic stock associated with a network of quartz-carbonate veins and veinlets with pyrite and arsenopyrite dissemination. Gold-bearing veins have a dominant NNW to NS trend and are steeply dipping. Disseminated mineralisation is also located in the alteration envelops of the mineralised quartz veins.

Additional mineralisation is seen within interconnecting mineralised felsic dyke complexes that propagate from the main granite stock. These mineralised felsic dyke complexes, also trending NNW, host the mineralisation for the additional pits in the area, namely Binkadi, Bagoé, Western Arm and Boribana.

Interpretations of domain continuity were undertaken within Leapfrog3DTM software, with mineralisation intercepts correlating to individual lithological domains manually selected prior to creation of a vein and intrusion model (Figure 1). Interpretation was aided by geological pit mapping which ensured that modelling appropriately represented site-based observations and the current understanding of geology and mineralisation controls.

Mineralisation volume domains were delineated using a combination of:

  • Geological information comprising: Lithology, structural interpretation, veining and sulphides;
  • Utilising a nominal lower grade minimum cut-off of 0.3 g/t gold.

The main granite intrusions where modelled using lithological logging and a lower nominal 0.3 g/t gold cut-off, which provided a low grade (LG) halo mineralised domain. Statistical analysis of the Granite data showed a high grade (HG) sample population. Visually, this was supported by a consistent tenor of mineralisation lying as an internal, higher-grade core within the Granite. This HG internal sub-domain was then modelled, utilising a nominal 1.0 g/t lower cut-off. Cross cutting Felsic dyke complexes where then modelled using structural and lithological logging, assisted by a lower grade cut-off of 0.3 g/t gold.

Figure 1 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/115283c7-63d6-42dc-8b57-f0832cf4b60c

Sampling and Sub-Sampling

For all RC holes informing the resource estimate, samples were collected at 1 metre intervals and split at the drill sites using a multi-stage riffle splitter or cone splitter to produce sub-samples weighting 2-3 kilograms.

Diamond core was sawn in half with a diamond blade saw, with the right half sent for assaying and the left half stored in core trays for reference. Core was sampled in 1 metre intervals or to geological contacts.

RC and core samples were securely transported to either:

1)   Perseus’s sample preparation facility at SGM where they were dried, crushed to 2mm and a 1kg riffle split portion pulverised to 90% passing 75 microns and assayed with Aqua Regia, or

2)   Transported to a local laboratory and assayed using Fire Assay techniques.

Sample condition (dry, damp, wet) and a qualitative description of sample quality (high, moderate, low) were logged for RC holes. Holes were stopped if excessive water was intersected and the samples were considered at risk of smearing, or if sample recovery dropped to <90%.

For RC samples drilled for resource definition, the weight of each entire recovered 1 metre sample was recorded with sample recoveries averaging ~90%. There is no apparent relationship between sample recovery and gold grades in RC drill holes.

Recovered lengths of diamond core were measured for each drill run. Average core recoveries range from 85% in upper saprolite to 100% in fresh rock. There is no apparent relationship between core recovery and gold grades in diamond drill holes.

Sampling precision was monitored by inclusion of 1:20 duplicate field splits for RC samples. Additionally, duplicate pulps were created for 1:20 samples of all types.

Database checks were completed and included:

  • Checking for duplicate drill hole names and duplicate coordinates in the collar table;
  • Checking for missing drill holes in the collar, survey, assay and geology tables based on drill hole names;
  • Checking for survey inconsistencies including dips and azimuths <0o, dips >90o, azimuths >360o, negative depth values;
  • Checking for inconsistencies in the “From” and “To” fields of the assay and geology tables. These checks included the identification of negative values, overlapping intervals, duplicate intervals, gaps and intervals where the “From” value is greater than “To” value.

The drill hole samples are considered appropriate and representative.

Drilling techniques

The Mineral Resource at Sissingué are delineated from reverse circulation (RC) and diamond core drilling. Typical drill spacing is generally less than 25 metres x 25 metres with most holes drilled at-60 degrees toward either 090 (east) or 270 (west) degrees azimuth, perpendicular to the strike of mineralisation.

Grade Control drilling spacing is 8 metres x 6 metres, drilled either at 55 degrees or vertical, with samples collected every 1.5 metres.

The data type, spacing and distribution are considered sufficient to establish estimates of Mineral Resources.

Sample analysis methods

All gold assaying was completed by external or onsite commercial laboratories with samples dried, crushed to 10mm, and then pulverised to 85% passing 75 µm and assayed using a 25g or 50g charge for fire assay analysis with AAS finish.

Grade control samples were assayed on site using Aqua Regia and through several external laboratories using Fire Assay between 25g and 50g aliquots.

Quality Assurance and Quality Control

Assay accuracy and reliability were monitored by insertion of blanks at 1:20 samples and reference standards (CRMs) at 1:20 samples.

The performances of blanks and standards were monitored as assay results were received.

Intervals of significant gold grades were compared to logging of quartz veining, alteration and mineralisation and chip tray photographs.

Assays were plotted on cross-sections to check that significant intercepts conform to the expected locations of mineralisation and make geometric sense.

Diamond core holes have been drilled at Sissingué to twin RC holes. Portions of 247 RC drill holes were identified to have smeared assays and have been excluded from all resource estimates, statistics, and interpolations. They have been appropriately flagged in the database.

The Quality Assurance and Quality Control (QAQC) data show acceptable precision and no significant bias. Overall assaying quality is considered adequate to support estimates of Mineral Resource.

Estimation methodology – Open pit mineral resources

The 2022 MRE for the SGM was estimated using a combination of Local Uniform Conditioning (LUC) with Ordinary Kriging (OK) using Surpac 2021 and Isatis.

Estimation was constrained within mineralisation envelopes (wireframes) based on geological logging and grade thresholds. The three main host lithologies are Granite, Felsic Dykes and Sediments. Where geological contacts were not clearly controlling the distribution of mineralisation, a grade cut-off of 0.3 g/t gold was used to construct Mineral Resource boundaries. Analysis of the global grade distribution shows that there is a natural change in grade population at around 0.3 g/t gold.

The LUC methodology was used to estimate the gold grades within the major Granite and Sediment units due to the skewed nature of the grade populations. At the completion of the estimations, grade, density and estimation quality items were exported from Isatis and imported into a Surpac format block model for validation and reporting.

  • Two metre downhole composite gold grade data were interpolated into 16 mE x 16 mN x 5 mRL sized panels using Ordinary Kriging (OK).
  • Top cuts were used to remove outlier high grades by reviewing composite data globally and for each individual domain by using histograms, log-histograms, log-probability plots and high-grade metal sensitivity analysis, combined with spatial inspection of the grade distribution and outlier locations. Appropriate high-grade cuts were applied as required on an individual domain basis. Top cuts used ranged between 2 and 30 g/t Au.
  • A two-pass estimation strategy was employed. The minimum number of composites was set at 8 and the maximum number of composites at 16 for the first pass. A first pass search ellipse radius was set at 60 metres for these domains. A second pass search had minimum number of composites set at 5 and the maximum number at 24. The second pass search ellipse radius was set at 250 metres to ensure all remaining blocks had been estimated. The orientation of the search ellipse was set by the variogram model.
  • Change of Support (CoS) calculations were conducted, conditioned to the panel grade estimates, for selectivity on 2 mE x 4 mN x 2.5 mRL SMU-sized blocks to produce a recoverable resource estimate. The Gaussian-based Uniform Conditioning approach was applied to the OK check grade estimates. An information effect correction was applied during the CoS calculations, to account for a future theoretical grade control drill configuration. The CoS process yields a set of array variables, stored in the panel block model, detailing the estimates for tonnage, grade, and metal above a range of grade cut-offs.
  • A process of localisation was completed, by which the output of the CoS is mapped into single grade estimate per 2mE x 4mN x 2.5mRL block in an SMU block model, which comprises the final product of the grade estimation.

The remaining Felsic Dyke domains were estimated using 2m downhole composite gold grade data into 16 mE x 16 mN x 5 mRL sized panels using Ordinary Kriging (OK).

  • Top cuts were used to remove outlier high grades by reviewing composite data globally and for each individual domain by using histograms, log-histograms, log-probability plots and high-grade metal sensitivity analysis, combined with spatial inspection of the grade distribution and outlier locations. Appropriate high-grade cuts were applied as required on an individual domain basis. Top cuts used ranged between 2g/t and 30g/t Au.
  • The orientation of the variogram model and search ellipse was dynamically set according to the orientation of the lodes, as well the trend of high-grade mineralisation within the unit.
  • A three-pass search pass strategy was used with a 40 metre radii on the first pass, with the search ellipse doubling in size on successive passes.
  • Minimum number of samples varied from 2 to 8, with a maximum of 16.

Within the Grade Control (GC) volume, which is limited to the immediate vicinity of the GC drill holes, an OK estimate of gold grade was produced using the GC drill data.

  • A non-linear method was not considered necessary to reflect the grade distribution satisfactorily at the 2 mE x 4 mN x 2.5 mRL SMU block scale due to the very dense ~10 metres GC drill spacing available within this volume.
  • A dynamic oriented ellipsoidal search radii of 20m was used.
  • A three-pass search strategy was used with the search ellipse doubling in size on successive pass.
  • Minimum number of samples varied from 2 to 8, with the maximum set at 14.
  • Estimation was into blocks 16 mE x 16 mN x 5 mRL.

Block model validation was undertaken globally by comparing:

  • The mean LUC and OK block grade estimates to the mean of the informing composite grades on a domain-by-domain basis
  • Visual inspection of the estimated block grades viewed in conjunction with the sample data
  • Using swath plots to compare the LUC and OK gold estimates to the sample data
  • A comparison of the LUC and GC Models where the LUC local grade model, based only on the relatively wide spaced resource drill data, was compared to the high confidence GC OK estimates within the GC volume.

The GC OK estimates are considered to represent a benchmark by which to measure the success or otherwise of the LUC estimates.

Criteria for resource classification

The SGM MRE has been classified into Measured, Indicated and Inferred categories, in accordance with the 2012 Australasian Code for Reporting of Mineral Resources and Ore Reserves (JORC Code) and the CIM Definition Standards (CIM, 2014). A range of criteria has been considered in determining this classification, including geological and grade continuity, data quality and drillhole spacing resulting in the MRE being classified as Measured, Indicated and Inferred.

The portions of the MRE classified as Measured have been flagged using an interpreted volume defined by high quality estimation parameters, which includes an average distance to nearest sample of 7 metres and an average distance to all informing samples of 12 metres. The Measured portion of the resource has been drilled on a nominal 6 metres x 8 metres GC spacing.

The portions of the MRE classified as Indicated have been flagged using a sectional interpreted volume defined by medium to high quality of estimation parameters, an average distance to nearest sample of less than 20 metres and an average distance to all informing samples of less than 40 metres. For the Sediment and Granite domains within the main Sissingué pit, due consideration was also given to the geological and mineralisation continuity available due to mining and positive historical reconciliation.

The portions of the MRE classified as Inferred represent the material extending down dip within and peripheral within the mineralised Domains. In these portions, geological continuity is present but not consistently confirmed by 20 metres x 20 metres drilling and incorporates volume extensions past the deepest drilling by up to 40 metres where the domain has not been closed off by drilling. The Inferred portions of the MRE are defined by lower confidence of estimation parameters, an average slope of regression (true to estimated block) of < 0.4 and an average distance to composites used of > 35 metres.

Mineralisation within the model which did not satisfy the criteria for Mineral Resource remained unclassified.

Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. MRE’s do not account for selectivity, mining loss and dilution. This MRE includes Inferred Mineral Resources which are unable to have economic considerations applied to them, nor is there certainty that they will be converted to Measured or Indicated Resources through further sampling.

The Mineral Resource estimate appropriately reflects the Competent Person’s view of the deposit. Optimisations have been run at a USD$1,800 gold price to define the base of mineralisation potentially mineable by open pit mining. The Competent Person endorses the results and classification.

Cut-off grade

The MRE cut-off grade for reporting of global open pit global gold resources at Sissingué is 0.6 g/t and has been applied to all materials respectively, based on estimates from mining, ore transport and processing costs, expected metallurgical performances of the various material types and a gold price of US$1,800/oz.

Tonnages were estimated on a dry basis.

REASONABLE PROSPECTS FOR EVENTUAL ECONOMIC EXRTRACTION

The SGM MRE, as reported, has been assessed to meet Reasonable Prospects for Eventual Economic Extraction (RPEEE) based on the following considerations.

Mineral resources are reported within optimal pit shells generated using estimates of mining, ore transport and processing costs, the expected metallurgical performances of the various material types and a gold price of US$1,800/oz.

Stockpiles

Mineral Resources contained in stockpiles are based on volume estimates calculated from ground survey data, loose bulk densities derived over time by reconciliation of volumes mined (at in situ densities) to stockpile movements and volumes and estimates of stockpile grades based on predicted grades of mined material transferred onto stockpiles and material depleted by processing.

Closing SGM stockpiles as at 31 December 2021 were estimated as shown in Table 3.

Table 3: SGM Closing Stockpiles – 31 December 2021 1

MaterialQUANTITY
kt
GRADE
G/t gold
GOLD
Koz
Low grade oxide540.61
Low grade fresh3591.315
High grade fresh2491.512
Total6621.330

Notes:

1. Stockpile tonnage and grade estimates are considered sufficiently accurate to support their classification as Measured Mineral Resources.

ORE RESERVE STATEMENT

Material information summary as required under ASX Listing Rule 5.9 and JORC 2012 reporting guidelines.

The updated Ore Reserve estimate for SGM is a depletion of the previous SGM Ore Reserve and update of Ore Reserve estimation based on the latest Mineral Resource estimate for the Sissingué deposit. Further information regarding updates to the Sissingué Ore Reserves are detailed in JORC Table 1 – Section 4 Estimation and Reporting of Ore Reserves.

The SGM Ore Reserve is summarised below in Table 4 and is estimated at 2.6 Mt of ore, grading 1.3 g/t gold and containing 108k ounces of gold. The classification categories of Proved and Probable under the JORC Code (2012) are equivalent to the CIM categories of the same name (CIM, 2014).

Table 4: SGM Proved and Probable Ore Reserves as at 31 December 2021 5,7

PROJECT

DEPOSIT
TYPE

PROVEDPROBABLEPROVED AND PROBABLE
QUANTITY
Mt
GRADE
G/t gold
GOLD
‘000 oz
QUANTITY
Mt
GRADE
G/t gold
GOLD
‘000 oz
QUANTITY
Mt
GRADE
G/t gold
GOLD
‘000 oz
Sissingué1,2,3,4Open Pit1.01.3400.91.3371.91.378
Stockpiles6Stockpile0.71.330---0.71.330
TOTAL1.71.3710.91.3372.61.3108

Notes:

1. Based on depletion to 31 December 2021 mining surfaces.
2. Based on Mineral Resource Estimates which were current at February 2022.
3. Based on February 2022 Ore Reserve estimation.
4. Variable gold grade cut-off for each material type, ranging from 0.40 g/t to 1.00 g/t
5. Inferred Mineral Resource is considered as waste.
6. Based on EOM December 2021 stockpile balance report.
7. Rounding of numbers to appropriate precisions may have resulted in apparent inconsistencies.

The changes in the Ore Reserve from last quoted in June 2021 are associated with ore depletion from mining since 30 June 2021 up to 31 December 2021 along with revised Sissingué Ore Reserves driven by an updated resource model. The waterfall graph (Figure 2) below summarises the changes in the SGM Ore Reserves.

Figure 7 is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/d80a4458-8379-4fab-8724-d6b7c43882d6

Economic assumptions

  • Gold metal price US$1,600/oz is used for Sissingué deposit pit optimisation, with the cut-offs based on US$1,500/oz gold price.
  • Average costs used in optimising pit designs are as shown in Table 5 below.
  • A discount rate of 10% (real) has been assumed to calculate net present values of forecast cash flows.

Table 5: Assumed LOM average operating costs including Fimbiasso and Bagoé deposits

MINING (OPEN PIT)PROCESSING G&A SELLING ROYALTIES
US$5.67t/minedUS$16.11/milledUS$12.11t/milledUS$3.75/oz sold4.5%

open pit mining parameters

  • The chosen method for the Ore Reserves is conventional open pit mining utilising hydraulic excavators and trucks, mining bench heights of 5 metres with 2.5 metre flitches to minimise ore loss and dilution.
  • The economic pit shell was defined using Whittle pit optimisation software (Whittle) with inputs such as geotechnical parameters, ore loss and dilution, metallurgical recovery and mining costs.
  • The pit optimisation was run with revenue generated only by Measured and Indicated Mineral Resources. No value was allocated to Inferred Mineral Resources.
  • Whittle 4X input parameters were based on Perseus’s operating site experience and supporting technical studies.
  • The pit slope design assumptions are based on a geotechnical study by George Orr and Associates (Australia) Pty Ltd for Sissingué . Overall pit slopes are 30 to 50 degrees inclusive of berms spaced at between 5, 10 and 20 metres vertically and berm widths of 4 to 7 metres.
  • Pit ramps have been designed for a 40 tonne articulated dump truck fleet and are set at 16 metres (dual lane) to 10 metres (single lane).
  • Vertical mining advance has been capped to 75m/year based on Perseus’s operating experience.
  • Minimum mining width of 40 metres was generally applied to the pit cutback designs.
  • There are no physical constraints to mining within the lease areas. No property, infrastructure or environmental issues are known to exist which may limit the extent of mining within the mining areas.
  • Ore from Sissingué pits will be stockpiled on designated location based on rock type and grade.
  • Ore cut-off grades, based on the gold price, cost and processing parameters, are as shown in Table 6.

Table 6: Open Pit Cut-Off Grades

DEPOSIT

CUT-OFF GRADE BY ORE TYPE (G/T GOLD)
OXIDETRANSITIONFRESH GRANITEFRESH SEDIMENT/MAFIC
Sissingué0.400.600.801.00

Processing parameters

  • The process metallurgical recovery for gold is assigned by material type in each deposit. Gold recovery rates range from 93% for oxide ore to 89% for fresh ore. Recovery variation is a function of differing metallurgical properties of different material type of ores from each deposit. The metallurgical recoveries are as shown in Table 7.
  • No deleterious material has been identified.
  • Average annual processing throughput rate of ore is nominally 1.2Mtpa of combined ore from all deposits, with throughput rates variable by material type. The processing circuit involves single stage crushing, semi-autogenous grinding, gravity recovery and CIL.

Table 7: Metallurgical Recoveries by Material Type and Pit

DEPOSIT

CUT-OFF GRADE BY ORE TYPE (G/T GOLD)
OXIDETRANSITIONFRESH GRANITEFRESH SEDIMENT/MAFIC
Sissingué93.1195.090.088.82

Notes:

  1. Average value based on formula (6.0649 * ln (Au_grade) + 92.185)%
  2. Average value based on formula (7.63 * In (Au_grade) + 78.5)%

Stockpile parameters

Ore mined from Sissingué deposits will be temporarily stockpiled based on rock type and grade. Ore from Fimbiasso and Bagoé will be blended with remaining ore from the Sissingué deposit to keep the processing plant at full capacity.

Criteria for ore reserve classification

Ore Reserves have been classified based on the underlying Mineral Resource classifications and the level of detail in the mine planning. The Mineral Resources were classified as Measured, Indicated and Inferred. The Ore Reserves, based only on the Measured and Indicated Resources, have been classified as Proved and Probable Ore Reserves, respectively.

The Ore Reserve is classified as Proved and Probable in accordance with the JORC Code (2012) and CIM (2014), corresponding to the Mineral Resource classifications of Measured and Indicated and considering other factors where relevant. The deposits’ geological models are well constrained. The Ore Reserve classification is considered appropriate given the nature of the deposits, the moderate grade variability, drilling density, structural complexity and mining history.

JORC 2012 Table 1 – Section 1 sampling techniques and data

(Criteria in this section apply to all succeeding sections.)

CRITERIAJORC CODE EXPLANATIONCOMMENTARY
Sampling techniquesNature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.
  • Data used for estimating Mineral Resources at Sissingué include:
    • 142,249 metres of RC drilling in 1,937 RC holes;
    • 78,824 metres of diamond core drilling in 406 holes;
    • 4,334 metres of pre-collared diamond core holes in 39 pre-collared diamond core holes;
    • 89,805 metres of Grade Control RC drilling in 4,444 additional holes;
    • 114,032 metres of Grade Control AC drilling in 6,292 holes
  • RC drill holes were sampled in 1 m Intervals with the majority composited to 2 m samples (by weighing) prior to submission for assay. Selected infill drill holes were submitted as 1 m samples. 1 and 2 m sub-sample weights nominally of 2.5 kg and 5 kg respectively.
  • Half-core from diamond drill holes was submitted for assay (‘right’ side systematically taken; 1.5 m in oxide and transition, 1 m in fresh).
  • RC holes completed in 2021 and grade control holes were sampled in 1.5 m intervals with 3kg subsamples riffle split for assay.
  • Samples from pre-2021 resource definition RC and core holes were assayed by 50g fire assay.
  • Samples from 2021 resource definition RC holes and from grade control holes were assayed using aqua regia digest and AAS.
Drilling techniquesDrill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).
  • RC drilling (5¼” diameter), usually 80 m or less in depth. Generally, RC holes have collar azimuth and inclination only measured.
  • Diamond drilling, HQ in weathered rock, NQ in fresh rock. All diamond holes downhole surveyed at 30 m intervals.
  • 43 core holes oriented by core spear; 217 holes oriented by “AceTool” device.
Drill sample recoveryMethod of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.
  • 1 metre RC samples weighed and composited to 2 metres.
  • Length of recovered diamond core measured and recovery calculated based on run length; close to 100% recovery for all core in fresh rock.
  • There is no evident relationship between sample recovery and grade for diamond drilling.
LoggingWhether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography.
The total length and percentage of the relevant intersections logged.
  • RC drill chip boards were prepared, and the chips logged geologically, including rock type, alteration type and intensity (where recognisable), vein quartz content in estimated percentage, sulphide mineralisation and estimated content, and weathering domain.
  • Diamond drill core was geologically and structurally logged and photographed, before being sawn in half, including fault, fold, cleavage and joint orientation, lithological contacts, vein orientation and bedding. Logged items are lithology, weathering, colour, grain size, vein type and vein volume percentage, sulphide mineralisation and their estimated percentage, alteration, and alteration intensity.
  • All RC and diamond holes were sampled and assayed in entirety.
  • Logging is considered appropriate and reliable.
Sub-sampling techniques and sample preparationIf core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material being sampled.
  • In pre-2021 RC holes, samples were collected at the drill site at 1 m intervals and split using a multi-stage riffle splitter. Each two consecutive samples were composited (where applicable) in one bag. Wet samples were sub-sampled using a spear. Note that all wet samples have been discarded from data that inform the resource estimate.
  • Diamond core sawn in half using a motorized diamond blade saw; right half sent for assaying, left half stored in core trays for reference.
  • Both core and RC samples followed a standard path of drying, crushing and grinding. Samples were pulverised with a ring mill and thoroughly mixed on a rolling mat (“carpet roll”), and then 200 g of sub-sample was collected. Internal laboratory checks required at least 90% of the pulp passing -75 µm.
  • Some RC samples at depth were identified as having downhole contamination and resultant smearing of grades as a result of wet drilling in clayey material. As a result of this, all RC holes in the main Sissingué deposit area were reviewed and any suspected of containing smeared assays were removed from the dataset prior to estimation. Approximately 5% of RC samples were removed due to suspected downhole contamination. Additional diamond core drilling was undertaken in 2016 to confirm mineralisation volumes and grades in the core of the deposit.
  • Except for the issue noted above, the sub-sampling is considered appropriate and representative.
Quality of assay data and laboratory testsThe nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.
  • A small number of initial holes were assayed by bottle roll cyanide extraction which did not produce an accurate result due to incorrect methodology.
  • All subsequent assaying of pre-2021 resource definition RC and core samples was by standard 40 or 50g fire assay with AAS finish.
  • Samples from 2021 resource definition RC holes and from grade control holes were assayed by 50g aqua regia digest and AAS finish.
  • Field duplicates (RC only) inserted at 1 in 25.
  • No field duplicates for DD as ¼ core considered as inadequate sample, and submission remaining ½ core considered undesirable.
  • Blanks inserted at 1 in 25.
  • Certified standards at 1 in 50 up to 2008; thereafter at 1 in 20.
  • Internal laboratory standards, duplicates and repeats and various other tests have been carried out throughout the drilling programs.
  • QAQC shows no bias, but only moderate reproducibility, particularly at high grades. This is due to the occurrence of particulate gold at Sissingué.
  • Overall assaying quality is considered acceptable except for the potential smearing in some RC samples that were subsequently removed from the dataset prior to estimation as described above.
Verification of sampling and assayingThe verification of significant intersections by either independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
  • During 2016, Perseus drilled several diamond core holes to confirm the grade tenor and check RC drill holes suspected of downhole contamination and smearing. As a result of this program, approximately 5% of RC samples were removed from the dataset where the RC grades were not supported by the diamond core drilling.
  • Drill hole information for pre-2021 RC and diamond core holes was captured at the drill site on paper.
  • All hard copies were delivered to the database administrator in Tengréla site office and the information entered into a digital relational database.
  • All hard copies are now stored at Sissingué mine site exploration office.
  • Logging and sampling hardcopy records for 2021 resource definition drilling and grade control drilling are stored at the Sissingué mine.
  • Downhole survey data and collar survey data were provided by drilling contractors and surveyors respectively in digital format.
  • Data for resource definition drill holes are stored in a centralised acQuire database. Database administration is based in Perseus’ office in Accra/Ghana and under the supervision of a dedicated Database Manager.
  • Data for grade control drill holes are stored at Sissingué mine in a MS Access relational database maintained by mine geologists.
  • No adjustments were made to the raw assay data except for the removal of any RC samples with suspected smearing of grades as previously discussed. Top cutting is only applied after database compositing and statistical analysis and prior to resource estimation.
Location of data pointsAccuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
  • All RC and diamond holes were surveyed using differential GPS, until September 2009 by a certified contract surveyor (SEMS Exploration Services Ltd, Ghana). Drill holes between September 2009 and October 2010 were surveyed by CBM Surveys Ltd of Ghana. All subsequent drill holes were surveyed by the company’s surveyor.
  • Grid system used is WGS84 UTM Zone 29N with an arbitrary local elevation datum.
  • The topography covering the extent of the Sissingué Mineral Resource model was created as a digital terrain model (DTM) using the drill hole collar data, an additional 639 survey points across the prospect and, elsewhere, SRTM 90m spaced spot heights adjusted to local height datum.
Data spacing and distributionData spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
  • Data spacing for resource estimation varies from 10 m x 10 m to 20 m x 20 m for most areas of the deposit.
  • Where data spacing is wider (to a maximum of 40 m x 40 m), an Inferred classification is used.
  • Data spacing is sufficient to establish grade and geological continuity appropriate to the resource estimation procedures and classifications applied.
  • Samples have been composited (by computer) to 2 m, honouring geological/mineralisation domains.
Orientation of data in relation to geological structureWhether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.
  • Orientation of drilled section lines is dominantly at right angles to the strike of the geology and mineralisation domains.
  • Drillholes are angled to cross the sub-vertical dip of the geological domains.
  • Mineralised veins and their alteration selvages occur at various orientations within the overall mineralised zones; the estimation method is considered to account for this.
Sample securityThe measures taken to ensure sample security.
  • Samples from RC drilling were collected and bagged at drill site during the drilling operation. Core samples were cut in a central facility in Tengréla and samples placed into sample bags as they were cut.
  • All samples catalogued and placed in large woven bags and sealed prior to dispatch to ALS, Intertek or BVML for preparation and analysis.
  • Dispatch from site to Korhogo (Intertek) was undertaken by Perseus staff and vehicles.
  • Samples dispatched to ALS and BVML were collected from Tengréla by staff and vehicles of the respective laboratories.
  • Samples from 2021 resource definition drilling and from grade control holes have been prepared and assayed at Sissingué mine site in a laboratory operated under contract by SGS Mineral Laboratories.
  • All aspects of the process were supervised by Perseus personnel and limited opportunity exists for tampering with samples.
Audits or reviewsThe results of any audits or reviews of sampling techniques and data.
  • Steffen Brammer of Perseus reviewed sampling techniques and quality control data during regular site visits between 2008 and 2013 and considered them adequate.
  • Reviews were also carried out by Runge Limited during 2009 and 2010 and by Widenbar & Associates in October 2012 with acceptable conclusions.
  • Gary Brabham of Perseus Mining has reviewed sampling techniques and quality control data between 2016 and 2021 with acceptable conclusions.


JORC 2012 Table 1 – Section 2 Reporting of Exploration Results

(Criteria listed in the preceding section also apply to this section.)

CRITERIAJORC CODE EXPLANATIONCOMMENTARY
Mineral tenement and land tenure statusType, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.
  • The Sissingué Mineral Resource lies within mining permit PE39 (Permit d’Exploitation Sissingué).
  • Perseus holds an 86% interest in PE39 through the Company’s wholly owned subsidiary Perseus Mining Côte d’Ivoire SA. The government of Côte d’Ivoire holds a 10% free carried interest in the property and the remaining 4% interest is held by local joint venture partner Société Minière de Côte d’Ivoire (SOMICI).
  • The mining permit is valid until 8 August 2022 and is renewable.
  • The Government of Côte d’Ivoire is entitled to a royalty on production as follows:
Spot price per ounce - London PM FixRoyalty Rate
Less than or equal to US$10003%
Higher than US$1000 and less than or equal to US$13003.5%
Higher than US$1300 and less than or equal to US$16004%
Higher than US$1600 and less than or equal to US$20005%
Higher than US$20006%
  • Franco Nevada are entitled to a 0.5% royalty on production.
  • The Sissingué Project area has no known environmental liabilities.
Exploration done by other partiesAcknowledgment and appraisal of exploration by other parties.
  • Historical exploration over the Sissingué permit is limited to regional lag sampling by Randgold Resources during the 1990’s.
  • That work identified several target areas for gold but did not locate the main Sissingué gold deposit.
GeologyDeposit type, geological setting and style of mineralisation.
  • The Sissingué Deposit occurs in a strongly deformed Birimian greenstone belt intruded by quartz-feldspar felsic dykes and granitoid bodies.
  • Gold mineralisation at Sissingué is associated with the felsic dykes and small granitoid (tonalite) bodies that cross-cut sedimentary rocks.
  • Subsequent hydrothermal activities and metasomatism of the granitoids has led to a sericite-carbonate alteration within the intrusive and the more permeable horizons (sandstones and conglomerates) of the sedimentary rocks, and a low to moderate grade disseminated gold mineralisation.
  • Late-stage high grade Au-As-quartz-carbonate veins exploited the altered and brittle portions of the intrusive and sediments with common occurrences of visible gold.
Drill hole InformationA summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes:

  • easting and northing of the drill hole collar
  • elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar
  • dip and azimuth of the hole
  • down hole length and interception depth
  • hole length.
If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.
  • Individual exploration results are not being reported in the report to which this table relates.
Data aggregation methodsIn reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values should be clearly stated.
  • Individual exploration results are not being reported in the report to which this table relates.
Relationship between mineralization widths and intercept lengthsThese relationships are particularly important in the reporting of Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’).
  • Individual exploration results are not being reported in the report to which this table relates.
  • Orientation of drilled section lines is dominantly at right angles to the strike of the geology and mineralisation domains.
  • Drillholes are angled to cross the sub-vertical dip of the geological domains.
DiagramsAppropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.
  • Individual exploration results are not being reported in the report to which this table relates.
Balanced reportingWhere comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.
  • Individual exploration results are not being reported in the report to which this table relates.
Other substantive exploration dataOther exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.
  • Individual exploration results are not being reported in the report to which this table relates.
Further workThe nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.
  • Individual exploration results are not being reported in the report to which this table relates.
  • Sissingué mine has been operating since early 2018. Estimates of Mineral Resources and Mineral Reserves are progressively updated as new information comes to hand. Exploration over satellite deposits is on-going.


JORC 2012 Table 1 – Section 3 Estimation and Reporting of Mineral Resources

(Criteria listed in section 1, and where relevant in section 2, also apply to this section.)

CRITERIAJORC CODE EXPLANATIONCOMMENTARY
Database integrityMeasures taken to ensure that data has not been corrupted by, for example, transcription or keying errors, between its initial collection and its use for Mineral Resource estimation purposes.
Data validation procedures used.
  • Data for resource definition drill holes are stored in a centralised acQuire database. Database administration is based in Perseus’ office in Accra/Ghana and under the supervision of a dedicated Database Manager.
  • Perseus carried out detailed validation of the dataset and retains overall responsibility for the reliability of data that inform the resource estimate. All drill hole data were validated during data entry by Perseus including:
  • Checks for duplicate collars
  • Checks for missing samples
  • Checks for down hole from-to interval consistency
  • Checks for overlapping samples
  • Checks for samples beyond hole depth
  • Checks for inexistent or misspelt log items
  • Check for missing assays
  • Check for down-hole information beyond hole depth.
  • Additionally, Perseus carried out statistical and visual validation prior to estimation including:
  • Drillholes with overlapping sample intervals.
  • Sample intervals with no assay data.
  • Duplicate records.
  • Assay grade ranges.
  • Collar coordinate ranges.
  • Valid hole orientation data.
  • No irreconcilable issues were found, and the data are considered appropriate for resource estimation.
Site visitsComment on any site visits undertaken by the Competent Person and the outcome of those visits.
  • The competent Person (Christine Shore) conducts regular site visits. During these visits, the geological structures of the Sissingué Main Pit and controlling mineralisation were observed, including exploration activities and ongoing mining operations.
  • No material issues or risks pertaining to the resource were observed during the site visits
Geological interpretationConfidence in (or conversely, the uncertainty of) the geological interpretation of the mineral deposit.
Nature of the data used and of any assumptions made.
The effect, if any, of alternative interpretations on Mineral Resource estimation.
The use of geology in guiding and controlling Mineral Resource estimation.
The factors affecting continuity both of grade and geology.
  • The geological confidence is moderate to high, due to the mapping of exposures within the Main Pit.
  • The controls on gold mineralisation at the main Sissingué deposit and nearby smaller deposits are understood with reasonable confidence.
  • Drill hole logs were used to guide 3D interpretation of quartz-feldspar felsic dykes and granite intrusions that are key controls on mineralisation.
  • Drill hole logs were also used to guide interpretations of surfaces delineating interfaces between laterite, completely weathered, transitional and fresh rock weathering horizons.
  • The factors affecting continuity both of grade and geology are most likely to be associated with structural controls and local complexity, the knowledge of which is limited with the current spacing of information. The broad approach to the mineralisation modelling in the Granite and Sediment units is an attempt to model an unbiased interpretation.
DimensionsThe extent and variability of the Mineral Resource expressed as length (along strike or otherwise), plan width, and depth below surface to the upper and lower limits of the Mineral Resource.
  • The gold Mineralisation was domained by its host lithology for modelling (granite, felsic dykes and sediments). Within the dyke domains, mineralised sediments in the alteration halo of the dykes were included to maintain a minimum width of the wireframes and to maintain continuity along strike. Where geological contacts were not clearly controlling the distribution of mineralisation, a grade cut-off of 0.3 g/t Au was used to construct Mineral Resource boundaries and to provide overall geometry to mineralised zones. A minimum of 2 m width was used for the wireframes and samples of grades below the nominal cut-off of 0.3 g/t Au were included where the wireframe would otherwise be less than 2 m wide. Analysis of the global grade distribution shows that there is a natural change in grade population at around 0.3 g/t Au.
  • The domains trend grid north, extend over 2,500 metres strike and dip steeply to the west and east with horizontal widths varying between 5 to 30 metres for the dyke associated domains and up to 180 metres in width for the granite domains. Domains are interpreted to a maximum vertical depth of 300 metres.
Estimation and modelling techniquesThe nature and appropriateness of the estimation technique(s) applied and key assumptions, including treatment of extreme grade values, domaining, interpolation parameters and maximum distance of extrapolation from data points. If a computer assisted estimation method was chosen include a description of computer software and parameters used.
The availability of check estimates, previous estimates and/or mine production records and whether the Mineral Resource estimate takes appropriate account of such data.
The assumptions made regarding recovery of by-products.
Estimation of deleterious elements or other non-grade variables of economic significance (e.g. sulphur for acid mine drainage characterisation).
In the case of block model interpolation, the block size in relation to the average sample spacing and the search employed.
Any assumptions behind modelling of selective mining units.
Any assumptions about correlation between variables.
Description of how the geological interpretation was used to control the resource estimates.
Discussion of basis for using or not using grade cutting or capping.
The process of validation, the checking process used, the comparison of model data to drill hole data, and use of reconciliation data if available.
  • Domains 100, 101, 400 and 401 were estimated using Localised Uniform Conditioning (LUC). A non-linear method was deemed appropriate after reviewing domain statistics.
  • Two metre downhole composite gold grade data were interpolated into 16 mE x 16 mN x 5 mRL sized panels using Ordinary Kriging (OK).
  • Top cuts were used to remove outlier high grades by reviewing composite data globally and for each individual domain by using histograms, log-histograms, log-probability plots and high-grade metal sensitivity analysis, combined with spatial inspection of the grade distribution and outlier locations. Appropriate high-grade cuts were applied as required on an individual domain basis. Top cuts used ranged between 15 and 30 g/t Au.
  • The minimum number of composites was set at 8 and the maximum number of composites was set at 16 for the first pass. A first pass search ellipse radius was set at 60 m for these domains. A second pass had minimum number of composites set at 5 and the maximum number of composites was set at 24. The second pass search ellipse radius was set at 250 m to ensure all remaining blocks had been estimated. The orientation of the search ellipse was set by the variogram model.
  • Change of Support (CoS) calculations were conducted, conditioned to the panel grade estimates, for selectivity on 2 mE x 4 mN x 2.5 mRL SMU-sized blocks in order to produce a recoverable resource estimate. The Gaussian-based Uniform Conditioning approach was applied to the OK check grade estimates. An information effect correction was applied during the CoS calculations, to account for a future theoretical grade control drill configuration. The CoS process yields a set of array variables, stored in the panel block model, detailing the estimates for tonnage, grade and metal above a range of grade cut-offs.
  • A process of localisation was completed, by which the output of the CoS is mapped into single grade estimate per 2mE x 4mN x 2.5mRL block in an SMU block model, which comprises the final product of the grade estimation.
  • Remaining resource domains were estimated using two metre downhole composite gold grade data into 16 mE x 16 mN x 5 mRL sized panels using Ordinary Kriging (OK).
  • Top cuts were used to remove outlier high grades by reviewing composite data globally and for each individual domain by using histograms, log-histograms, log-probability plots and high-grade metal sensitivity analysis, combined with spatial inspection of the grade distribution and outlier locations. Appropriate high-grade cuts were applied as required on an individual domain basis. Top cuts used ranged between 3 and 15 g/t Au.
  • The orientation of the variogram model and search ellipse was dynamically set according to the orientation of the lodes, as well the trend of high-grade mineralisation within the unit.
  • Three search passes were used with a 40m radii on the first pass, with the search ellipse doubling in size on successive passes.
  • Minimum number of samples varied from 2 to 8, with a maximum of 16.
  • Within the Grade Control (GC) volume, which is limited to the immediate vicinity of the GC drill holes, an OK estimate of gold grade was produced using the GC drill data.
  • A non-linear method was not considered necessary to reflect the grade distribution satisfactorily at the 2 mE x 4 mN x 2.5 mRL SMU block scale due to the very dense ~10 m GC drill spacing available within this volume.
  • Dynamic oriented ellipsoidal search radii of 20m.
  • Three search passes were used with the search ellipse doubling in size on successive pass.
  • Minimum number of samples varied from 2 to 8, with the maximum set at 14.
  • Estimation was into blocks 16 mE x 16 mN x 5mRL.
  • Surpac Mining Software 2021 and Isatis were used for estimation.
  • No by-product recoveries were considered.
  • Block model validation was undertaken globally by comparing the mean LUC and OK block grade estimates to the mean of the informing composite grades on a domain by domain basis, visual inspection of the estimated block grades viewed in conjunction with the sample data, using swath plots comparing the LUC and OK gold estimates to the sample data and comparing the LUC and GC Models where the LUC local grade model, based only on the relatively wide spaced RDV data, was compared to the high confidence GC OK estimates within the GC volume. The GC OK estimates are considered to represent a benchmark by which to measure the success or otherwise of the LUC estimates.
MoistureWhether the tonnages are estimated on a dry basis or with natural moisture, and the method of determination of the moisture content.
  • Tonnages are reported on a dry basis.
Cut-off parametersThe basis of the adopted cut-off grade(s) or quality parameters applied.
  • The 0.6g/t cut-off grade for reporting of resources is based on inputs to optimisation studies carried out as part of the 2022 update of the Sissingué life-of-mine plan and a gold price of US$1,800/oz.
Mining factors or assumptionsAssumptions made regarding possible mining methods, minimum mining dimensions and internal (or, if applicable, external) mining dilution. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider potential mining methods, but the assumptions made regarding mining methods and parameters when estimating Mineral Resources may not always be rigorous. Where this is the case, this should be reported with an explanation of the basis of the mining assumptions made.
  • Open pit optimisations were run using current and forecast cost, mining methods and processing parameters and a gold price of USD$1,800 to define the base of potentially economic open-pit material for the Mineral Resource.
Metallurgical factors or assumptionsThe basis for assumptions or predictions regarding metallurgical amenability. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider potential metallurgical methods, but the assumptions regarding metallurgical treatment processes and parameters made when reporting Mineral Resources may not always be rigorous. Where this is the case, this should be reported with an explanation of the basis of the metallurgical assumptions made.
  • Metallurgical gold recoveries have been well established by experience through mining and processing Sissingué ores since January 2018 and these have been applied to this MRE.
Environmental factors or assumptionsAssumptions made regarding possible waste and process residue disposal options. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider the potential environmental impacts of the mining and processing operation. While at this stage the determination of potential environmental impacts, particularly for a green fields project, may not always be well advanced, the status of early consideration of these potential environmental impacts should be reported. Where these aspects have not been considered this should be reported with an explanation of the environmental assumptions made.
  • Perseus has been issued with an Environmental Permit and all other permits required to develop and operate an open pit mine and ore processing facility at Sissingué.
Bulk densityWhether assumed or determined. If assumed, the basis for the assumptions. If determined, the method used, whether wet or dry, the frequency of the measurements, the nature, size and representativeness of the samples.
The bulk density for bulk material must have been measured by methods that adequately account for void spaces (vugs, porosity, etc.), moisture and differences between rock and alteration zones within the deposit.
Discuss assumptions for bulk density estimates used in the evaluation process of the different materials.
  • A total of 770 bulk density measurements are available from HQ and NQ drill core using the water displacement method.
  • 380 results are from oxide material, 132 from transitional material and 258 from fresh material.
  • After discarding possibly erroneous high and low values, mean densities were calculated and applied to each of the weathering horizons:
  • Laterite 1.85 t/ cu m
  • Completely weathered (oxide) 1.77 t/cu m
  • Transition 2.11 t/cu m
  • Fresh rock 2.73 t/cu m
  • The densities are supported by 294 bulk density measurements undertaken using the water displacement method of material exposed during mining at Sissingué to 18 August 2018.
ClassificationThe basis for the classification of the Mineral Resources into varying confidence categories.
Whether appropriate account has been taken of all relevant factors (i.e. relative confidence in tonnage/grade estimations, reliability of input data, confidence in continuity of geology and metal values, quality, quantity and distribution of the data).
Whether the result appropriately reflects the Competent Person’s view of the deposit.
  • All relevant criteria have been considered in the classification of the Mineral Resources as Measured, Indicated and Inferred.
  • The portions of the MRE classified as Measured have been flagged using an interpreted volume defined by high quality of estimation parameters, which includes an average distance to nearest sample of 7 m and an average distance to all informing samples of 12 m. The Measured portion of the resource has been drilled on a nominal 6 m x 8 m GC spacing.
  • The portions of the MRE classified as Indicated have been flagged using a sectional interpreted volume defined by medium to high quality of estimation parameters, an average distance to nearest sample of less than 20 m and an average distance to all informing samples of less than 40 m. For the sandstone and granite domains within the main Sissingué pit due consideration was also given to the geological and mineralisation continuity.
  • The portions of the MRE classified as Inferred represent the material extending down dip within and peripheral to the mineralised Domains. In these portions geological continuity is present but not consistently confirmed by 20 m x 20 m drilling and incorporates volume extensions past the deepest drilling by up to 40 m when the domain is not closed off by drilling. The Inferred portions of the MRE are defined by low quality of estimation parameters, an average slope of regression (true to estimated block) of < 0.4 and an average distance to composites used of > 35 m.
  • The Mineral Resource estimate appropriately reflects the Competent Person’s view of the deposit. Trial optimisations have been run at a USD1,800 gold price to define the base of material potentially mineable by open pit mining.
  • The Competent Person endorses the results and classification.
Audits or reviewsThe results of any audits or reviews of Mineral Resource estimates.
  • The Mineral Resource estimation procedure and results have been internally reviewed.
Discussion of relative accuracy/ confidenceWhere appropriate a statement of the relative accuracy and confidence level in the Mineral Resource estimate using an approach or procedure deemed appropriate by the Competent Person. For example, the application of statistical or geostatistical procedures to quantify the relative accuracy of the resource within stated confidence limits, or, if such an approach is not deemed appropriate, a qualitative discussion of the factors that could affect the relative accuracy and confidence of the estimate.
The statement should specify whether it relates to global or local estimates, and, if local, state the relevant tonnages, which should be relevant to technical and economic evaluation. Documentation should include assumptions made and the procedures used.
These statements of relative accuracy and confidence of the estimate should be compared with production data, where available.
  • Although the estimate for gold is without bias, some of the estimated volume however is based on relatively wide spaced data. The estimate is therefore of moderate confidence and expected to be of moderate relative accuracy at the local (SMU) scale when drilling density exceeds 20 m x 20 m. Infill grade control drilling will be required to improve the confidence of the local estimate.
  • The LUC estimate has been compared to the OK estimates and in a limited volume to an OK estimate of close spaced grade control drilling. Differences have been identified; however, these do not exceed expectations and no material issues have been identified in these comparisons and the LUC estimate appropriately represents the source data.


JORC 2012 Table 1 – Section 4 Estimation and Reporting of Ore Reserves

CRITERIAJORC CODE EXPLANATIONCOMMENTARY
Mineral Resource estimate for conversion to Ore ReservesDescription of the Mineral Resource estimate used as a basis for the conversion to an Ore Reserve.
Clear statement as to whether the Mineral Resources are reported additional to, or inclusive of, the Ore Reserves.
  • The open pit Mineral Resources for Sissingué based on information compiled by Ms Christine Shore (Fellow AusIMM) of Perseus Mining who is the Competent Person for the Mineral Resource estimates.
  • Mineral Resources quoted in this report are inclusive of Ore Reserves.
Site visitsComment on any site visits undertaken by the Competent Person and the outcome of those visits.
If no site visits have been undertaken indicate why this is the case.
  • Mr Craig Fawcett as the Competent Person for the purpose of a JORC Ore Reserve has regularly visited the mine.
Study statusThe type and level of study undertaken to enable Mineral Resources to be converted to Ore Reserves.
The Code requires that a study to at least Pre-Feasibility Study level has been undertaken to convert Mineral Resources to Ore Reserves. Such studies will have been carried out and will have determined a mine plan that is technically achievable and economically viable, and that material Modifying Factors have been considered.
  • The Mineral Resources have been converted to Ore Reserves by means of a Life of Mine plan including economic assessment.
  • Ore Reserves are determined from technically achievable pit designs based on Open Pit Optimisation. The designs were assessed to ensure economic viability.
Cut-off parametersThe basis of the cut-off grade(s) or quality parameters applied.
  • The cut-off grade is based on the economic parameters developed for the Operation. The cut-off grade varies by material types as follows;
PITOXIDE
Au g/t
TRANSITION
Au g/t
FRESH GRANITE
Au g/t
FRESH SEDIMENT
Au g/t
Sissingué Main 0.400.600.801.00
Boribana 0.40---
West Arm0.40---
Binkadi0.40---
Bagoé 0.80---
Mining factors or assumptionsThe method and assumptions used as reported in the Pre-Feasibility or Feasibility Study to convert the Mineral Resource to an Ore Reserve (i.e. either by application of appropriate factors by optimisation or by preliminary or detailed design).
The choice, nature and appropriateness of the selected mining method(s) and other mining parameters including associated design issues such as pre-strip, access, etc.
The assumptions made regarding geotechnical parameters (e.g. pit slopes, stope sizes, etc.), grade control and pre-production drilling.
The major assumptions made and Mineral Resource model used for pit and stope optimisation (if appropriate).
The mining dilution factors used.
The mining recovery factors used.
Any minimum mining widths used.
The manner in which Inferred Mineral Resources are utilised in mining studies and the sensitivity of the outcome to their inclusion.
The infrastructure requirements of the selected mining methods.
  • The chosen method of mining is conventional open pit mining utilising hydraulic excavators and trucks, mining bench heights of 5 m with 2.5m flitches to minimise ore loss and waste rock dilution.
  • The economic pit shell was defined using Whittle pit optimisation software (“Whittle”) with inputs such as geotechnical parameters, ore loss and dilution, metallurgical recovery and mining costs.
  • The pit optimisation was run with revenue generated only by Measured and Indicated Mineral Resources. No value was allocated to Inferred Mineral Resources.
  • Whittle input parameters were generally based on Perseus’s site operating experience and supporting technical studies.
  • Appropriate mining modifying factors such as ore loss, dilution and design parameters were used to convert the Mineral Resource to an Ore Reserve.
  • The pit slope design assumptions are based on a geotechnical study by George, Orr and Associates. Overall pit slopes are 30 to 50 degrees inclusive of berms spaced at between 5, 10 and 20 metres vertically and berm widths of 4 to 7 metres.
  • Pit ramps have been designed for a 40 tonne ADT truck fleet and are set at 16 metres (dual lane) to 10 metres (single lane).
  • Vertical mining advance has been capped based on Perseus’s operating experience.
  • Minimum mining width of 40 m was generally applied to the pit cutback designs.
  • Inferred Resources have not been included in this mining study.
  • There are no physical constraints to mining within the lease area. No property, infrastructure or environmental issues are known to exist which may limit the extent of mining within the mining area
Metallurgical factors or assumptionsThe metallurgical process proposed and the appropriateness of that process to the style of mineralisation.
Whether the metallurgical process is well-tested technology or novel in nature.
The nature, amount and representativeness of metallurgical test work undertaken, the nature of the metallurgical domaining applied and the corresponding metallurgical recovery factors applied.
Any assumptions or allowances made for deleterious elements.
The existence of any bulk sample or pilot scale test work and the degree to which such samples are considered representative of the orebody as a whole.
For minerals that are defined by a specification, has the ore reserve estimation been based on the appropriate mineralogy to meet the specifications?
  • Ore from Sissingué mine will be processed together with ore from Fimbiasso and Bagoé pits based on blending strategy.
  • The Sissingué processing plant uses crushing, grinding, gravity and cyanide leaching to extract gold. The plant has a nominal capacity of 1.2Mtpa.
  • The processing test work is representative of the different material types throughout the Mining area.
  • No deleterious material has been identified.
  • The process metallurgical recovery for gold is fixed by material type in each deposit:
PITOXIDE
%
TRANSITION
%
FRESH GRANITE
%
FRESH SEDIMENT
%
Sissingué Main 91.9^ 95.090.088.8*
Boribana 91.7^ ---
West Arm 94.9^ ---
Binkadi 94.6^ ---
Bagoé 92.1^ ---
^ Average value based on formula (6.0649 * ln(Au_grade) + 92.185)%
* Average value based on formula (7.63* In (Au_grade) + 78.5)%
EnvironmentThe status of studies of potential environmental impacts of the mining and processing operation. Details of waste rock characterisation and the consideration of potential sites, status of design options considered and, where applicable, the status of approvals for process residue storage and waste dumps should be reported.
  • No environmental issues are known to exist which will prevent open pit mining and ore processing to continue to operate. Perseus has sufficient space available for waste dumps to store the expected quantities of mine waste rock associated with the Sissingué open pit Ore Reserve. Based on testing to date there is no risk of acid rock drainage as any potentially acid generating material is encapsulated within acid neutralising material.
InfrastructureThe existence of appropriate infrastructure: availability of land for plant development, power, water, transportation (particularly for bulk commodities), labour, accommodation; or the ease with which the infrastructure can be provided or accessed.
  • Power supply for Sissingué processing plant is from on-site power generation already established.
  • Water supply for processing plant is from river abstraction, groundwater extracted from dedicated boreholes and decant water for processing plant.
  • Access to site is via public road via Tengrela to Sissingué.
  • A camp is established at Sissingué site to accommodate non-local employees.
  • Mining workshops and offices to be established on site
CostsThe derivation of, or assumptions made, regarding projected capital costs in the study.
The methodology used to estimate operating costs.
Allowances made for the content of deleterious elements.
The derivation of assumptions made of metal or commodity price(s), for the principal minerals and co- products.
The source of exchange rates used in the study.
Derivation of transportation charges.
The basis for forecasting or source of treatment and refining charges, penalties for failure to meet specification, etc.
The allowances made for royalties payable, both Government and private.
  • The mining costs are based on schedule of rates provided by Perseus mining contractors and Perseus actual performance. All other operating costs have been provided by Perseus and its Consultants.
  • Non-deleterious materials have been identified and costed.
  • Gold is the only metal considered in the Ore Reserves.
  • All costs are in US$.
  • The transportation and Refining cost of US$3.75/oz was applied.
  • A royalty of 4.5% of the metal price was applied.
Revenue factorsThe derivation of, or assumptions made regarding revenue factors including head grade, metal or commodity price(s) exchange rates, transportation and treatment charges, penalties, net smelter returns, etc.
The derivation of assumptions made of metal or commodity price(s), for the principal metals, minerals and co-products.
  • A gold price of US$1,600/oz was used for pit optimisation but the cut-offs for planning are based on US$1,500/oz gold price.
  • Economic modelling by Perseus is at US$1,500/oz.
  • Bullion and Refining cost of US$3.75/oz was applied.
  • A royalty of 4.5% of the metal price was applied.
Market assessmentThe demand, supply and stock situation for the particular commodity, consumption trends and factors likely to affect supply and demand into the future.
A customer and competitor analysis along with the identification of likely market windows for the product.
Price and volume forecasts and the basis for these forecasts.
For industrial minerals the customer specification, testing and acceptance requirements prior to a supply contract.
  • The demand for gold is considered at the gold price used.
  • It was considered that gold will be marketable beyond the processing life.
  • The processing forecast and mine life are based on life of mine plans.
  • The commodity is not an industrial metal.
EconomicThe inputs to the economic analysis to produce the net present value (NPV) in the study, the source and confidence of these economic inputs including estimated inflation, discount rate, etc.
NPV ranges and sensitivity to variations in the significant assumptions and inputs.
  • A schedule and economic model have been completed by Perseus on a pre-tax basis using the Ore Reserves published in this Statement. The inputs used are as per those stated in the relevant sections of this Statement. The assessment used a discount rate of 10% which is considered appropriate.
  • The Base Case results from the financial model confirm that the Project is economically viable.
  • Note that as the gold price changes so too will the economic limits of the pits and their Reserves. Consequently, the size of the Project will therefore adjust to suit the revised economics.
SocialThe status of agreements with key stakeholders and matters leading to social licence to operate.
  • Perseus has established relevant agreements with local stakeholders.
  • Perseus has and will continue to use skilled expatriate workers and locally sourced skilled workers.
OtherTo the extent relevant, the impact of the following on the project and/or on the estimation and classification of the Ore Reserves:
Any identified material naturally occurring risks.
The status of material legal agreements and marketing arrangements.
The status of governmental agreements and approvals critical to the viability of the project, such as mineral tenement status, and government and statutory approvals. There must be reasonable grounds to expect that all necessary Government approvals will be received within the timeframes anticipated in the Pre-Feasibility or Feasibility study. Highlight and discuss the materiality of any unresolved matter that is dependent on a third party on which extraction of the reserve is contingent.
  • The estimate of Ore Reserves for the Sissingué Open Pits are not materially affected by any other known environmental, permitting, legal, title, taxation, socio-economic, marketing, political or other relevant factors other than that described in the preceding text. It is believed that the classification of Ore Reserves as set out in the following sections is reasonable.
ClassificationThe basis for the classification of the Ore Reserves into varying confidence categories.
Whether the result appropriately reflects the Competent Person’s view of the deposit.
The proportion of Probable Ore Reserves that have been derived from Measured Mineral Resources (if any).
  • Ore Reserves have been classified based on the underlying Mineral Resources classifications and the level of detail in the mine planning. The Mineral Resources were classified as Measured, Indicated and Inferred. The Ore Reserves, based only on the Measured and Indicated Resources, have been classified as Proven and Probable Ore Reserves, respectively.
  • The Ore Reserve is classified as Proved and Probable in accordance with the JORC Code, corresponding to the Mineral Resource classifications of Measured and Indicated and taking into account other factors where relevant. The deposit’s geological model is well constrained. The Ore Reserve classification is considered appropriate given the nature of the deposit, the moderate grade variability, drilling density, structural complexity and mining history. Therefore, it was deemed appropriate to use Measured Mineral Resources as a basis for Proven Reserves and Indicated Mineral Resources as a basis for Probable Reserves.
  • No Inferred Mineral Resources were included in the Ore Reserve estimate.
Audits or reviewsThe results of any audits or reviews of Ore Reserve estimates.
  • Perseus has completed an internal review of the Ore Reserve estimate.
  • The JORC Code provides guidelines which set out minimum standards, recommendations and guidelines for the Public Reporting of exploration results, Mineral Resources and Ore Reserves. Within the JORC Code is a “Checklist of Assessment and Reporting Criteria” (Table 1 – JORC Code). This checklist has been used as a systematic method to undertake a review of the underlying Study used to report in accordance with the JORC Code.
  • A LOM Plan was prepared based on the ROM mineable ore contained with the pit designs. The LOM Plan prepared by Perseus is reasonable and practical. This confirmed that it was suitable for estimation of Ore Reserves. An economic model was prepared that confirmed the Operation to be economically viable.
Discussion of relative accuracy/ confidenceWhere appropriate a statement of the relative accuracy and confidence level in the Ore Reserve estimate using an approach or procedure deemed appropriate by the Competent Person. For example, the application of statistical or geostatistical procedures to quantify the relative accuracy of the reserve within stated confidence limits, or, if such an approach is not deemed appropriate, a qualitative discussion of the factors which could affect the relative accuracy and confidence of the estimate.
The statement should specify whether it relates to global or local estimates, and, if local, state the relevant tonnages, which should be relevant to technical and economic evaluation. Documentation should include assumptions made and the procedures used.
Accuracy and confidence discussions should extend to specific discussions of any applied Modifying Factors that may have a material impact on Ore Reserve viability, or for which there are remaining areas of uncertainty at the current study stage.
It is recognised that this may not be possible or appropriate in all circumstances. These statements of relative accuracy and confidence of the estimate should be compared with production data, where available.
  • The accuracy and confidence of the inputs are, as a minimum, of a pre- feasibility level (for the global open pit Ore Reserves).
  • The key factors that are likely to affect the accuracy and confidence in the Ore Reserves are:
  • Accuracy of the underlying Resource Block Models;
  • Changes in gold prices and sales agreements;
  • Changes in metallurgical recovery; and
  • Mining ore loss and dilution
  • The Ore Reserve has utilised all parameters provided by site as made available.
  • The accuracy of the underlying Mineral Resources is defined by the Resource Category that the Mineral Resources are assigned to. Only the highest categories of Resource classification, Measured and Indicated, have been used as a basis for estimating Ore Reserves.



 


Primary Logo

Figure 1: Sissingué Mine Layout

Figure 1: Sissingué Mine Layout
Figure 2: Fimbiasso Mine Layout

Figure 2: Fimbiasso Mine Layout
Figure 3: Bagoé Mine Layout – Antoinette and Juliette deposits

Figure 3: Bagoé Mine Layout – Antoinette and Juliette deposits
Figure 4: Bagoé Mine Layout – Veronique deposit

Figure 4: Bagoé Mine Layout – Veronique deposit
Figure 5: Sissingué - Scheduled monthly ex-pit material movement by deposit.

Figure 5: Sissingué - Scheduled monthly ex-pit material movement by deposit.
Figure 6: Sissingué – Annual Tonnes and Grade to SGM Mill

Figure 6: Sissingué – Annual Tonnes and Grade to SGM Mill
Figure 1: SGM Mineralisation. Plan view of drillhole traces and Mineralised Domain.

Figure 1: SGM Mineralisation. Plan view of drillhole traces and Mineralised Domain.
Figure 7: Change in SGM Ore Reserves – June 2021 to December 2021

Figure 7: Change in SGM Ore Reserves – June 2021 to December 2021

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok