Wesdome Discovers Two New Zones in Hanging Wall Basalt of Kiena Deep Zone, Including 2,850 g/t Gold (Uncut) Over 1.5 Metre (Core Length)

2022-11-16 / @GlobeNewswire

 

TORONTO, Nov. 16, 2022 (GLOBE NEWSWIRE) -- Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”) today announces underground exploration drilling results from the Kiena Deep A Zone at the Company’s 100% owned Kiena Mine Complex in Val d'Or, Quebec.

Since the completion of the PFS in 2021 and subsequent preproduction activities, underground drilling has been focussed on exploration to test sectors proximal to the Kiena Deep A Zones. As part of this exploration focus, early success discovered the Footwall Zones last year. Earlier this year, exploration confirmed the presence of the South limb in the folded Kiena Deep A Zone at depth (see press release dated June 1, 2022). Recent drilling has continued to return high grade assays from this South limb area (reported below and Figure 1a, 1b). This area remains open along strike and down dip. The discovery of additional zones proximal to the A Zones represents a significant benefit to the mining from using common infrastructure. Development metres planned per sub level will leverage access to more ounces, thereby positively impacting future mining.

Most recently, drilling intersected two new zones in the hanging wall basalt (Figure 1b). The first zone was observed in holes N103-6839W1A, N103-6839W2, and N103-6839W3. This zone consists of disseminated sulfides (pyrrhotite±pyrite) in basalt associated with a stockwork of veinlets composed of quartz ± pyrite±pyrrhotite±chalcopyrite±visible gold, (mm- to cm-thick) showing a random orientation. Up to now, the strike, dip and true thickness of this zone are unknown. The second zone, observed in hole N103-6839W4, consists of a quartz-cabonate vein ( <10 cm-thick) with visible gold that returned 2,850 g/t Au over 1.5 m (See Figure 1b and Photograph Figure 2). Currently, the strike and dip of this vein are unknown. The adjacent or “shoulder” assays are pending for this hole. These new basalt zones all occur below an observed bend or steepening in the plunge of the Kiena Deep A Zone. Early hypothesis is that folding/faulting represented by fracturing in the hanging wall basalt could allow for a favorable environment for this type of mineralization.

Highlights of the recent drilling are listed below and are summarized in Table 1.

  • Hole N103-6839W4: 2,850 g/t Au over 1.5 m core length New Basalt Zone
  • Hole N103-6839W2: 11.6 g/t Au over 41.3 m core length (9.7 g/t Au capped,) New Basalt Zone
  • Hole N112-6838A: 36.0 g/t Au over 6.4 m core length (32.5 g/t Au capped, 4.3 m true width) A1 Zone (South Limb)
  • Hole 6839W3: 20.3 g/t Au over 12.4 m core length (19.0 g/t Au capped, 5.5 m true width) A Zone (South Limb)
  • Hole N103-6839W1A : 10.4 g/t Au over 53.5 m core length (5.9 g/t Au capped) New Basalt Zone

Assays capped at 90.0 g/t Au for A zone and capped at 35.0 g/t Au for the New Basalt Zones. True widths are estimated based on 3D model construction.

Mr. Duncan Middlemiss, President and CEO commented, “We are pleased with the recent discoveries of the South Limb and Footwall zones, and most recently the high grade results in the basalt in the hanging wall of the A Zone. These discoveries demonstrate the exploration potential of the Kiena Deep Zone. These zones have the potential to increase the number of ounces per vertical metre and to provide additional working faces during mining. The discovery of these zones highlight the potential to add ounces within the basalt, where the rock quality is significantly better than in the footwall of the A Zone allowing for increased development rates. Obviously, this area remains one of the focuses of the current drilling.

We are also very pleased with the continued expansion of the South Limb of the A Zone and local expansion of the A and A1 zones. This can positively impact project economics as the same underground infrastructure utilized to access the A Zone can be leveraged to mine these additional zones on a lower unit cost basis.

Additionally at Kiena, our paste fill plant commissioning activities remain on track and we expect the plant to be fully operational shortly, with the first paste pour scheduled for later this month.”

As well, recent drilling from 112 Level also continued to confirm the lateral extension of the A and A1 Zones (Figure 3). These new results continue to add confidence in the existing 3D model.

TECHNICAL DISCLOSURE

The underground technical and geoscientific content of this release has been compiled, reviewed, and approved by Bruno Turcotte, P.Geo., (OGQ #453) Chief Geologist – Underground Exploration of the Company, a "Qualified Person" as defined in National Instrument 43-101 -Standards of Disclosure for Mineral Projects.

Analytical work was performed by ALS Minerals of Val-d’Or (Quebec), a certified commercial laboratory (Accredited Lab #689). Sample preparation was completed at ALS Minerals in Val d'Or (Quebec). Assaying comprised fire assay methods with an atomic absorption finish. Any sample assaying >3 g/t Au was rerun by fire assay method with gravimetric finish, and any sample assaying >10 g/t Au was rerun with the metallic sieve method. In addition to laboratory internal duplicates, standards, and blanks, the geology department inserts blind duplicates, standards, and blanks into the sample stream at a frequency of one in twenty to monitor quality control.

ABOUT WESDOME
Wesdome is a Canadian focused gold producer with two high grade underground assets, the Eagle River mine in Ontario and the recently re-started Kiena mine in Quebec. The Company also retains meaningful exposure to the Moss Lake gold deposit in Ontario through its equity position in Goldshore Resources Inc. The Company’s primary goal is to responsibly leverage this operating platform and high-quality brownfield and greenfield exploration pipeline to build Canada’s next intermediate gold producer. Wesdome trades on the Toronto Stock Exchange under the symbol “WDO,” with a secondary listing on the OTCQX under the symbol “WDOFF.”

For further information, please contact:
     
Duncan Middlemiss or Lindsay Carpenter Dunlop
President and CEO   VP Investor Relations
416-360-3743 ext. 2029   416-360-3743 ext. 2025
duncan.middlemiss@wesdome.com   lindsay.dunlop@wesdome.com
     
     
220 Bay St, Suite 1200    
Toronto, ON,M5J 2W4    
Toll Free: 1-866-4-WDO-TSX    
Phone: 416-360-3743, Fax: 416-360-7620    
Website: www.wesdome.com    
     
     

This news release contains “forward-looking information” which may include, but is not limited to, statements with respect to the future financial or operating performance of the Company and its projects. Often, but not always, forward-looking statements can be identified by the use of words such as “plans”, “expects”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates”, or “believes” or variations (including negative variations) of such words and phrases, or state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Forward-looking statements contained herein are made as of the date of this press release and the Company disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. The Company undertakes no obligation to update forward-looking statements if circumstances, management’s estimates or opinions should change, except as required by securities legislation. Accordingly, the reader is cautioned not to place undue reliance on forward-looking statements. The Company has included in this news release certain non-IFRS performance measures, including, but not limited to, mine operating profit, mining and processing costs and cash costs. Cash costs per ounce reflect actual mine operating costs incurred during the fiscal period divided by the number of ounces produced. These measures are not defined under IFRS and therefore should not be considered in isolation or as an alternative to or more meaningful than, net income (loss) or cash flow from operating activities as determined in accordance with IFRS as an indicator of our financial performance or liquidity. The Company believes that, in addition to conventional measures prepared in accordance with IFRS, certain investors use this information to evaluate the Company's performance and ability to generate cash flow.

Table 1: Kiena Complex Underground Drilling Assay and Composite Results

Composites

Hole No.From
(m)
To
(m)
Core
Length (m)
Estimated True
width (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839733.8739.65.83.85.485.48South Limb
N103-6839W1A228.9239.210.35.518.8016.91South Limb
N103-6839W2149.8159.09.25.33.323.32South Limb
N103-6839W3254.6267.012.45.520.3318.99South Limb
N112-6838A243.7246.73.03.016.2516.25South Limb
N103-6839W2162.0169.57.54.514.7914.79A1 Zone
N112-6823A302.2308.26.03.84.554.55A1 Zone
N112-6833260.8282.822.010.013.1513.15A1 Zone
N112-6838A266.2272.66.44.336.0032.37A1 Zone
N112-6841258.0266.78.75.56.766.76A1 Zone
N112-6823A322.8327.34.53.95.945.94A2 Zone


Hole No.From
(m)
To
(m)
Core
Length (m)
Estimated True
width (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W1A163.2216.753.5?10.395.91NEW
N103-6839W297.5138.841.3?11.559.70NEW
N103-6839W3210.0235.525.5?9.987.34NEW
N103-6839W4260.4261.91.5?2,849.6735.00NEW

Assays

Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839733.8735.31.58.188.18A Zone
N103-6839735.3736.81.50.020.02A Zone
N103-6839736.8738.01.20.040.04A Zone
N103-6839738.0739.01.01.461.46A Zone
N103-6839739.0739.60.630.0030.00A Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W1A163.2164.71.54.654.65?
N103-6839W1A164.7166.21.56.386.38?
N103-6839W1A166.2167.71.53.533.53?
N103-6839W1A167.7169.21.57.957.95?
N103-6839W1A169.2170.71.57.357.35?
N103-6839W1A170.7172.21.555.8035.00?
N103-6839W1A172.2173.71.5174.0035.00?
N103-6839W1A173.7175.21.54.544.54?
N103-6839W1A175.2176.71.52.422.42?
N103-6839W1A176.7178.21.54.124.12?
N103-6839W1A178.2179.71.519.1519.15?
N103-6839W1A179.7181.21.52.252.25?
N103-6839W1A181.2182.71.53.923.92?
N103-6839W1A182.7184.21.54.104.10?
N103-6839W1A184.2185.71.51.361.36?
N103-6839W1A185.7187.21.56.556.55?
N103-6839W1A187.2188.71.50.580.58?
N103-6839W1A188.7190.21.50.060.06?
N103-6839W1A190.2191.71.51.031.03?
N103-6839W1A191.7193.21.51.481.48?
N103-6839W1A193.2194.71.512.3012.30?
N103-6839W1A194.7196.21.54.924.92?
N103-6839W1A196.2197.71.54.074.07?
N103-6839W1A197.7198.71.02.262.26?
N103-6839W1A198.7199.71.02.742.74?
N103-6839W1A199.7200.71.07.957.95?
N103-6839W1A200.7201.71.07.787.78?
N103-6839W1A201.7202.71.01.181.18?
N103-6839W1A202.7203.71.00.020.02?
N103-6839W1A203.7204.71.00.040.04?
N103-6839W1A204.7205.71.00.100.10?
N103-6839W1A205.7206.71.00.420.42?
N103-6839W1A206.7207.71.03.753.75?
N103-6839W1A207.7208.71.01.421.42?
N103-6839W1A208.7209.71.00.620.62?
N103-6839W1A209.7210.71.01.561.56?
N103-6839W1A210.7211.71.01.661.66?
N103-6839W1A211.7212.71.06.236.23?
N103-6839W1A212.7213.71.09.779.77?
N103-6839W1A213.7214.71.00.800.80?
N103-6839W1A214.7215.71.01.861.86?
N103-6839W1A215.7216.71.06.906.90?
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W1A228.9229.91.05.395.39A Zone
N103-6839W1A229.9230.91.08.558.55A Zone
N103-6839W1A230.9231.91.021.4021.40A Zone
N103-6839W1A231.9232.91.00.480.48A Zone
N103-6839W1A232.9233.91.01.161.16A Zone
N103-6839W1A233.9234.91.00.880.88A Zone
N103-6839W1A234.9235.91.00.560.56A Zone
N103-6839W1A235.9236.91.00.350.35A Zone
N103-6839W1A236.9237.70.80.440.44A Zone
N103-6839W1A237.7239.21.5103.0090.00A Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W297.599.01.56.566.56?
N103-6839W299.0100.51.54.074.07?
N103-6839W2100.5102.01.52.142.14?
N103-6839W2102.0103.51.531.9031.90?
N103-6839W2103.5105.01.52.782.78?
N103-6839W2105.0106.51.53.013.01?
N103-6839W2106.5108.01.584.0035.00?
N103-6839W2108.0109.51.52.532.53?
N103-6839W2109.5111.01.54.394.39?
N103-6839W2111.0112.51.536.9035.00?
N103-6839W2112.5114.01.56.916.91?
N103-6839W2114.0115.51.58.438.43?
N103-6839W2115.5117.01.54.164.16?
N103-6839W2117.0118.51.54.614.61?
N103-6839W2118.5119.71.24.374.37?
N103-6839W2119.7120.30.64.844.84?
N103-6839W2120.3121.51.219.5519.55?
N103-6839W2121.5123.01.55.285.28?
N103-6839W2123.0124.51.54.174.17?
N103-6839W2124.5126.01.512.9012.90?
N103-6839W2126.0127.51.55.445.44?
N103-6839W2127.5129.01.52.302.30?
N103-6839W2129.0130.11.15.725.72?
N103-6839W2130.1130.80.72.422.42?
N103-6839W2130.8131.81.025.0025.00?
N103-6839W2131.8132.81.08.788.78?
N103-6839W2132.8133.81.05.465.46?
N103-6839W2133.8134.81.04.064.06?
N103-6839W2134.8135.81.04.954.95?
N103-6839W2135.8136.81.06.426.42?
N103-6839W2136.8137.81.030.6030.60?
N103-6839W2137.8138.81.03.493.49?
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W2149.8150.81.03.703.70A Zone
N103-6839W2150.8152.11.34.714.71A Zone
N103-6839W2152.1152.90.82.372.37A Zone
N103-6839W2152.9154.01.10.900.90A Zone
N103-6839W2154.0155.51.50.920.92A Zone
N103-6839W2155.5156.00.51.571.57A Zone
N103-6839W2156.0157.01.04.434.43A Zone
N103-6839W2157.0158.01.07.807.80A Zone
N103-6839W2158.0159.01.03.453.45A Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W2162.0163.01.08.328.32A1 Zone
N103-6839W2163.0164.01.019.7519.75A1 Zone
N103-6839W2164.0165.01.03.323.32A1 Zone
N103-6839W2165.0166.01.01.041.04A1 Zone
N103-6839W2166.0167.01.02.542.54A1 Zone
N103-6839W2167.0167.80.80.380.38A1 Zone
N103-6839W2167.8168.50.712.9012.90A1 Zone
N103-6839W2168.5169.51.066.6066.60A1 Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W3210.0211.51.58.108.10?
N103-6839W3211.5213.01.52.672.67?
N103-6839W3213.0214.51.50.560.56?
N103-6839W3214.5216.01.54.054.05?
N103-6839W3216.0217.01.0157.5035.00?
N103-6839W3217.0218.01.05.585.58?
N103-6839W3218.0219.01.05.155.15?
N103-6839W3219.0220.01.01.501.50?
N103-6839W3220.0221.01.03.793.79?
N103-6839W3221.0222.01.02.812.81?
N103-6839W3222.0222.90.91.291.29?
N103-6839W3222.9223.91.06.856.85?
N103-6839W3223.9225.01.16.226.22?
N103-6839W3225.0226.01.02.932.93?
N103-6839W3226.0227.01.02.362.36?
N103-6839W3227.0228.01.01.321.32?
N103-6839W3228.0229.01.02.372.37?
N103-6839W3229.0230.01.01.341.34?
N103-6839W3230.0231.01.010.8510.85?
N103-6839W3231.0232.51.52.302.30?
N103-6839W3232.5234.01.53.123.12?
N103-6839W3234.0235.51.57.357.35?
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W3254.6255.61.09.879.87A Zone
N103-6839W3255.6256.61.02.872.87A Zone
N103-6839W3256.6257.61.022.2022.20A Zone
N103-6839W3257.6258.50.95.665.66A Zone
N103-6839W3258.5259.40.91.301.30A Zone
N103-6839W3259.4260.20.80.580.58A Zone
N103-6839W3260.2261.21.04.954.95A Zone
N103-6839W3261.2262.21.04.324.32A Zone
N103-6839W3262.2263.10.994.4090.00A Zone
N103-6839W3263.1263.90.80.620.62A Zone
N103-6839W3263.9264.80.90.470.47A Zone
N103-6839W3264.8265.91.129.7029.70A Zone
N103-6839W3265.92671.159.7059.70A Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W4260.4260.90.5269.0035.00?
N103-6839W4260.9261.91.04140.0035.00?
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6823A302.2303.71.51.381.38A1 Zone
N112-6823A303.7305.21.512.3012.30A1 Zone
N112-6823A305.2306.71.54.264.26A1 Zone
N112-6823A306.7308.21.50.260.26A1 Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6823A322.8324.31.51.301.30A2 Zone
N112-6823A324.3324.80.56.656.65A2 Zone
N112-6823A324.8325.81.011.4511.45A2 Zone
N112-6823A325.8327.31.56.666.66A2 Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6833260.8261.81.05.465.46A1 Zone
N112-6833261.8263.31.50.270.27A1 Zone
N112-6833263.3264.10.880.3080.30A1 Zone
N112-6833264.1264.80.785.2085.20A1 Zone
N112-6833264.8265.50.715.6015.60A1 Zone
N112-6833265.5266.10.66.806.80A1 Zone
N112-6833266.1267.00.95.945.94A1 Zone
N112-6833267.0267.80.820.1020.10A1 Zone
N112-6833267.8268.81.06.826.82A1 Zone
N112-6833268.8269.81.02.922.92A1 Zone
N112-6833269.8270.81.01.371.37A1 Zone
N112-6833270.8271.81.01.641.64A1 Zone
N112-6833271.8272.81.00.910.91A1 Zone
N112-6833272.8273.81.02.232.23A1 Zone
N112-6833273.8274.60.87.427.42A1 Zone
N112-6833274.6275.50.93.913.91A1 Zone
N112-6833275.5276.81.311.1011.10A1 Zone
N112-6833276.8277.60.861.5061.50A1 Zone
N112-6833277.6278.40.87.057.05A1 Zone
N112-6833278.4279.81.40.530.53A1 Zone
N112-6833279.8280.50.71.511.51A1 Zone
N112-6833280.5281.30.84.244.24A1 Zone
N112-6833281.3282.81.515.5015.50A1 Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6838A243.7245.01.30.180.18A Zone
N112-6838A245.0246.01.048.4048.40A Zone
N112-6838A246.0246.70.70.160.16A Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6838A266.2267.71.50.700.70A1 Zone
N112-6838A267.7269.21.50.280.28A1 Zone
N112-6838A269.2269.70.542.1042.10A1 Zone
N112-6838A269.7270.71.036.7036.70A1 Zone
N112-6838A270.7272.21.5104.5090.00A1 Zone
       
Hole No.From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6841258.0259.01.04.584.58A Zone
N112-6841259.0260.01.06.876.87A Zone
N112-6841260.0261.01.09.869.86A Zone
N112-6841261.0262.01.04.234.23A Zone
N112-6841262.0263.01.05.955.95A Zone
N112-6841263.0264.01.02.152.15A Zone
N112-6841264.0265.01.010.7510.75A Zone
N112-6841265.0266.21.20.390.39A Zone
N112-6841266.2266.70.527.9027.90A Zone


Photos accompanying this announcement are available at: 

https://www.globenewswire.com/NewsRoom/AttachmentNg/f4aae5cf-a3dc-45ef-89f2-56dad04ca80c

https://www.globenewswire.com/NewsRoom/AttachmentNg/5c584b31-86d0-40a6-a0ca-9d78446138e6

https://www.globenewswire.com/NewsRoom/AttachmentNg/22ea972e-e5ff-4026-b8c4-aa4b75f4728f

PDF available: http://ml.globenewswire.com/Resource/Download/4d589122-ffbd-48c1-86a0-77f64827482d

 


Primary Logo

Figure 1

New Hanging Wall Zones at Kiena Deep
Figure 2

Photograph of Recent Drill Intersection
Figure 3

3D View of Kiena Deep A Zone with Assays

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok